5 to 20 psi absolute ambient 4 to 20 ma pressure transmitter

DMP331 can be custom scaled and calibrated during manufacture to your specified barometric range of 5 to 20 psi absolute.

500 kPa absolute intrinsically safe pressure transmitter

Intrinsically safe pressure transmitter, 0 to 500 kpa a, 1/2 BSP male, media temp –40 to 125°C, ATEX approval, stainless steel and output range 4-20ma

How to create a list of specification parameters for a pressure sensor

Before purchasing a pressure sensor, there are a number of application questions you will need to answer to ensure it is fit for purpose

High reading rate for measuring dynamic pressures to -200psf

DMP320 which has a high sampling rate of 10 kHz so you will easily resolve the dynamic change characteristic over 0 to -200 psf within the 8sec window.

Liquid column manometer pump to calibrate low pressures

Compact low range pressure calibration screw-press pump specially designed to help make setting low pressure readings easier.

LMK387 Cleanable Sewage and Sludge Pressure/Level Sensor

Rugged and easily cleanable pressure/level sensor for use with waste water sewage or sludge.

LMK 806 Plastic 21mm diameter Submersible Level Probe

The chemical resistant LMK806 submersible level probe is designed for use in confined spaces with aggressive media.

Detecting leaks in industrial estate water supply network

We are looking for a solution to monitor water network pressure changes to detect leakage in a short time period.

How to determine milk tank level and volume from pressure

How do I convert the pressure reading to quantity of milk at bottom temperature which varies approx 10 deg C

Why use 4-20mA and 3-15 psi rather than 0-20mA & 0-15psi

Why we mainly use 4-20 mA current and 3-15 psig pressure and not use from zero to 20 mA or 15 psig?

How do you measure flow rate with a dp cell

How do you use a dp cell measuring a span of 0-500 mmH2O with an o/p of 4-20 mA to control a flow rate of 0-1000 L/h for a flow meter range?

0.05 msec response time, 2 bar range pressure transducer

The IMP pressure transducer without any amplification electronics will provide a response time of around 23 microseconds (0.023 msec) for a 2 bar range.

Test panel mounted 50 psi g digital pressure gauge

This pressure gauge can be mounted into a circular cut-out on a test panel and powered by the internal or externally via a 9 volt dc power adapter.

16 bar, 200°C steam pressure transmitter and gauge

Combined pressure transmitter and indicator in one package with the option for use with high temperature media such as steam at 200°C

Sulfuric acid 12-15% conc. drop-in level probe for 10m high tank

level measurement of sulfuric acid tanks with a concentration between 12 and 15%.

Landfill level probe for measuring 6 metre depth of leachate

Submersible level probe with a high corrosion resistant SS316L body and chemical resistant ceramic diaphragm for use with leachate

Pressure gauge for recording pressure 0-6 bar on PC/Laptop

We are looking for a pressure gauge which can be connected with a PC or laptop to record the pressure values directly.

300°C max temperature, 0 to 300 bar, high range pressure sensor

The 35X HTC can measure up to 300 bar (and higher if necessary) on media up to temperatures of 300 degC max.

Argon gas compatible pressure sensor for measuring up to 100 mbar

I have an Argon filled chamber that I wish to measure pressure up to 100 millibar relative to atmosphere.

Low voltage 20 bar range OEM water logger pressure transducer

The stripped down OEM version of the IMP transducer is specifically designed for use inside freshwater pressure loggers

Natural gas compatible pressure switch for setting from 5 to 20 mbar

The 901 Prescal is compatible with natural gas and provides an adjustable pressure switch setting from 5mbar up to 20 mbar.

Bi-directional -20 to +100 Pa clean room air diff pressure transmitter

Air diff pressure transmitter for HVAC application to measure in the range of -20 to +100 Pa with an active analog output of 4 – 20 mA

5000 psi WECO® 1502 pressure transmitter and loop indicator

Loop powered display for mounting on a wall in hazardous area connected to a pressure transmitter with hammer union WECO™ 1502 process connection

DMK351 Liquid and Gas Resistant Intrinsically Safe Low Range Gauge Pressure Sensor

Intrinsically safe liquid & gas resistant low range pressure gauge reference pressure sensor for CHP, biogas and landfill sites.

Stainless steel 316L wetted parts 100 mbar ATEX pressure transmitter

ATEX and IECEX certified pressure transmitter for gas or dust and has all stainless steel 316L for use with liquids, and a low pressure range capability.

200 kg/cm² calibration hand pump & test gauge

Calibration hand pump and test gauge capable of measuring up to 200 kg/cm².

Calibrate air pressure gauges ranging to 60psi with NPT fittings

DM01 precision pressure gauge with a KHP35 pneumatic calibration pump to calibrate air pressure gauges, ranging to 60psi with NPT fittings.

Mechanical press 1000 bar pressure sensor and panel indicator

sensor and panel mount digital indicator for measuring the overload pressure in a mechanical press

300 foot sea depth waterproof pressure sensor with 0-5V signal

Waterproof submersible pressure sensor for lowering to ~300 feet below sea level.

90 degC air differential pressure transmitter and digital display

differential pressure transmitter with an attached digital display for use on high temperature air up to 90 degC with a range of 0 to 250 mmWC

Glycol/Water mixture peak pressure gauge to measure up to 15 bar

The LEO1 pressure gauge has a peak hold function and two modes of operation which captures twice a second or 5,000 times per second.

Logger for verifying water supply pressure over 7 days

The P-Triton-P is specifically designed for monitoring water supply pressures and storing readings for long term tests.

Precision hand pump with 1/4 NPT test gauge mount for -0.9 to 40 bar

Precision pressure hand pump with a range of -0.9 bar to 40 bar for setting vacuum and gauge pressure measurements.

180 degC pressure sensor for saturated steam up to 10 bar

A built-in cooling element allows the pressure sensor to be used on media temperatures up to 200 degC (FKM seal limit).

300 F protected 100 psi pressure transmitter

The IMP is a low cost pressure transmitter which has the option for a built-in process connector extender designed to reduce the temperature.

SDI-12 interface, 2 bar absolute, submersible water level sensor

The S12C is a submersible level probe with a SDI-12 protocol signal interface and has the option to measure absolute pressure rather than venting to air pressure above the water surface.

G1/4 internal thread pressure transmitter for measuring 0-100mb

Low range pressure transmitter with a G1/4 female thread for measuring over 0 to 100 millibar relative to atmospheric pressure.

Sea-water corrosion resistant 10 bar pressure transmitter

We have a pressure transmitter that needs to be replaced which has completely corroded after being used on sea-water.

Force & Area to Force per Unit Area Calculator

This tool will calculate the force per unit area from a applied force and area size in any mix of engineering units.

Modify linearisation to generate non-linear pressure readings

Customise pressure gauge linearisation to display non-linear pressure readings using factory calibration software

100 bar / 1,500 psi Hand Operated Pressure Calibration Pump – ADT918

The 918 Pneumatic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 1,500psi (100bar).

40 foot high diesel tank submersible pressure sensor

What submersible pressure sensor would you suggest to measure a 40′ deep diesel storage tank?

60 psi / 4 bar Low Pressure Calibration Pump – ADT912

Set precise calibration air pressures from 95% vacuum up to 4 bar / 60 psi.

200bar/3000psi Hand Operated High Air Pressure Test Pump – ADT920

Manually generate air pressures up to 200 bar / 3000 psi for pressure testing and calibrating pressure measurement equipment.

36,000 psi gauge for mounting in a test panel with rear fittings

Panel mount digital pressure gauge with rear pressure fitting for measuring high pressures up to 36,000 psi with an accuracy of 0.1% of full scale.

140 bar / 2,000 psi Hand Operated Air Pressure Test Pump – ADT919A

Generate air pressure up to 140 bar / 2,000 psi one handed.

Measuring force of a hydraulic press using a pressure gauge

Since force is determined from the pressure and the area of the ram piston, you will need a pressure gauge which enables you to configure a custom pressure unit.

35X HTC High Temperature Digital Pressure Sensor (< 300 degC)

The 35X HTC high temperature digital pressure sensor is suited for media temperatures up to 300 °C

400 bar hand pump and digital gauge for testing gauges

Hand pump and digital gauge for testing gauges from 0 to 400 bar, with IECEx intrinsic safety certificate and a set of NPT and BSP adapters.

Pressure Calibrator for Pressure Transmitter Calibration – ADT672

The ADT672 series of pressure calibrators are precision digital pressure gauges with electrical measurement for pressure transmitter calibration

2000 bar pressure calibration pump and digital test gauge

Pump and digital pressure gauge that is able to generate and measure pressures up to 2000 bar

2,500 bar / 37,500 psi Hydraulic Pressure Calibration Pump – ADT949

The ADT949 hydraulic ultra-high pressure test pump is a hand operated pressure pump designed to generate pressure up to 37,500 psi (2500 bar).

ADT681 Digital Pressure Gauge

The ADT681 digital pressure gauge family covers a wide range of pressures from as low as 1 inH20 differential to as high as 36,000 psi gauge.

40 mbar negative gauge vacuum transmitter for pump VSD control

DMP343 is a capable of measuring a 40 millibar negative pressure with a 4-20mA scaling over 0 to -40 mbar.

Portable recorder to log pressures up to 100 psi in hazardous area

The DM01 has internal data recording capability and is ATEX approved for use in hazardous areas.

Hastelloy diaphragm -100 to 50 kPa g range manometer

Small manometer device with membrane protected against corrosive material (chemicals) and which we would prefer to be covered with Hastelloy steel.

Pneumatic air cylinder pressure transducer monitoring up to 150 psi with Arduino

Sensor for monitoring the amount of air pressure required to supply a pneumatic air cylinder from a compressor, and connecting to a Arduino board

20 kg/cm² range 5Vdc output pressure transducer for potable water

Potable water pressure transducer with a 0 to 5 volts output and 0 to 20 kg/cm² absolute pressure range

Low delta P sensor with 200mmH2O range and response time < 5ms

The DMD331 uses silicon technology which is very small compared to other sensing technologies which would have a more limited response time.

Force per Unit Area Converter

This conversion tool converts force per unit area to any combination of force and area units and display a conversion scale for the value entered.

What is the difference between zero offset and zero drift?

Zero Offset relates to the zero setting tolerance during manufacture and Zero Drift relates to the expected maximum change in zero over time.

Diaphragm sealed high temperature pressure transmitter for -1 to 25 kg/cm²

Diaphragm sealed pressure transmitter for measuring over -1 to 25 kg/cm² on liquid with a flush type diaphragm up to a temperature of 190°C.

Barometric transducer with 23-34 inHg input range and 0-5Vdc output range

We are looking for a barometric transducer to use in a room with an ambient temperature of 20degC with a 23-34inHg input and a 0-5Vdc output

Choosing PVC, PUR, FEP and TPE cable types

When specifying the electrical connection for the DMP, DMK, LMP and LMK series of pressure/level transmitters you will need to choose from a selection of cable types.

Compound vacuum and pressure HART transmitter for +/- 500 mmWG

Compound vacuum and pressure transmitter with HART compliant 4-20mA analog output and insertion type, bottom mounted, 1/2 NPT male process connection

K114 USB Converter (K104 Replacement)

The K-114B USB converter for Keller digital pressure sensors and instruments has replaced the now obsolete K-104B USB converter.

Low range vacuum pressure logger for 0 to -60 inH2O g

I am interested in monitoring vacuum on a pipeline in the field with a portable data logger.

Square Root Extraction Input to Linear Output Converter

This sqrt extraction input to linear output converter provides an easy way to determine the ideal linear output for any given sqrt input value.

5 bar water irrigation pressure transducer with 0 to 5 volt output

Low-cost pressure transducer for irrigation application with a 0 to 5 volts dc output, 0 to 5 bar gauge pressure range, cable electrical termination and compatibility with fresh water.

Linear Input to Square Root Extraction Output Converter

This linear input to sqrt extraction output converter provides an easy way to determine the ideal sqrt output produced for any given linear input value.

Digital pressure gauge for calibrating steam gauges from vulcanisation presses

I am looking for a digital pressure gauge to calibrate the steam gauges on our vulcanisation presses.

Vacuum drying pressure data logger

Digital vacuum recorder for a vacuum drying pilot process.

100 pascals range brick kiln and dryer air pressure logger and sensor

Logger with low bidirectional range differential sensor for recording brick kiln and dryer air pressures over the compound range of -100 to +100 Pa.

10,000 mmH2O range 19mm dia borehole water level sensor

19mm diameter bore hole submersible water sensor designed to measure 0-10000 mmH2O raw water level with a 4-20mA output.

Low cost 2 metre high diesel tank level sensor with 0-10 volt output

Cost effective level sensor 0 – 2m, media is diesel fuel, output is 0-10V

Force and Lever Arm Length to Torque Calculator

This tool will calculate the torque generated around an axis by a force applied at right angle to a lever arm of a specified length, τ=Fr

IMSTL IP68 Water Temperature and Depth Transmitter

Stainless steel 316L waterproof probe for measuring both water temperature and depth and generating two separate 4-20mA current loop measurement signals.

DS201 Combined Pressure Sensor, Display and Switch

Ceramic diaphragm diaphragm based pressure sensor, indicator & electronic switch with pressure ranges from 0-0.4 bar up to 0-600 bar.

IMCL Low Cost Submersible Pressure Sensor

Economical IP68 protected sensor with stainless steel 316L housing and Ceramic strain gauge sensing diaphragm for measuring liquid depth pressure.

DS200 Combined Pressure Switch, Gauge and Sensor

Three in one electronic pressure switch, digital pressure gauge and pressure sensor with pressure ranges from 100 mbar up to 600 bar (1.5 to 9000 psi).

IWSL Potable Water Submersible Level Sensor

IP68 protect pressure sensor for monitoring potable water level to depths of 100 metres.

DMP304 Ultra High Range Hydraulic Pressure Transducer

Current output pressure transducer for measurement ranges from 0 to 2000 (30000 psi) range up to a maximum range of 6000 bar (90000 psi).

DMD341 Compact Differential Air Pressure Sensor

Small size dp sensor for measuring differential air pressure on HVAC, compress air and pneumatic control systems.

DMP331 Precision Pressure Transmitter

Stainless steel pressure transmitter with ranges from 100mbar up to 40 bar gauge or absolute. Special options for ATEX , SIL2 and compound ranges.

DMP334 Hydraulic Pressure Transducer for Very High Pressures

DMP 334 is a high range pressure transducer designed for measuring hydraulic pressures up to 2200 bar (32,000 psi) .

DMP333 High Range Precision Pressure Transmitter

The DMP 333 is a stainless steel 316L wetted parts pressure sensor for high pressure ranges on applications such as hydraulic test benches, presses, and hydraulic actuation.

ATM/T Pressure and Temperature Dual Output Transmitter

Dual analogue output signal transmitter for simultaneous measurement of media pressure and temperature. Pressure 100mb – 1000bar and temp -25 – 100 DegC.

LMK307 Submersible Waste Water Level Sensor

Submersible waste water level sensor with optional intrinsic safety certification for monitoring the level of sewage and effluent in water treatment plants.

DMK331P Flush Diaphragm Pressure Sensor

Screw-in pressure transmitter with flush stainless steel 316L diaphragm for measuring pressures of fluids with very high viscosity from 900 up to 6000 psi

LMK351 High Overpressure Flush Level Transmitter

Flush capacitive ceramic pressure sensor for measuring corrosive and viscous liquid level from levels 0.4 metres of water up to 200 mH2O.

IMP Low Cost Pressure Sensor

Versatile low price pressure sensor with a wide selection of electrical and mechanical options for customisation.

LEO1 (Ei) Digital Pressure Gauge

Battery powered digital gauge with an accuracy of 0.1% full scale in pressure ranges from -1 to 3 bar up to 1000 bar.

LMK331 Screw-In Ceramic Level Transmitter

Level pressure sensor with semi-flush ceramic diaphragm and stainless steel or PVDF wetted parts in ranges from 0-4 to 600mH2O gauge.

DMP331P Hygienic Flush Pressure Transmitter

Sanitary pressure sensor wth exposed diaphragm with no crevices for high temperatures up to 300 Degrees Celsius in ranges from 100mb up to 40 bar gauge or absolute

TPSA Precision High Pressure Transducer

High pressure transducer for pressure testing applications with pressure ranges from 0…4 bar (60 psi) up to 0…1000 bar (15,000 psi) gauge with a measurement accuracy of 0.1%.

DPS Low Differential Pressure Transmitter

Ultra low differential pressure transmitter for HVAC applications with 4-20mA current loop or amplified voltage output signal in pressure ranges from 0.1 mb up to 1 bar differential.

Marine approval is essential for reliable operation of sensors in harsh maritime conditions. This guide details the process, highlights crucial selection criteria, and explores diverse applications of certified sensors in various shipboard systems, from ballast control to cargo management.