0-1V to 0-5V Signal Conversion

Convert a 0 to 1 volt range measurement input signal into a 0 to 5 volts output signal.

0-1V to 0-20mA Signal Conversion

Convert a 0 to 1 volt range measurement input signal into a 0 to 20 milliamps current output signal.

0-1V to 4-20mA Signal Conversion

Convert a 0 to 1 volt range measurement input signal into a 4 to 20 milliamps loop output signal.

Pressure Transducer 0.5-4.5V Voltage Output Calculator

This pressure transducer 0.5 to 4.5 volts amplified output calculator provides a way to determine the output reading from the applied pressure and pressure transducer range.

Pressure Transducer 1-5V Voltage Output Calculator

This pressure transducer 1 to 5 volts amplified output calculator provides a way to determine the output reading from the applied pressure and pressure transducer range.

Pressure Transducer 0-5V Voltage Output Calculator

This pressure transducer 0 to 5 volts amplified output calculator provides a way to determine the output reading from the applied pressure and pressure transducer range.

Pressure Transducer 0-10V Voltage Output Calculator

This pressure transducer 0 to 10 volts amplified output calculator provides a way to determine the output reading from the applied pressure and pressure transducer range.

Ratiometric V/V Signal to Measurement Converter

This ratiometric voltage input to measurement output converter provides a way to determine the measurement output reading and voltage input range from a ratiometric voltage input signal with a specified volts per volt span sensitivity, zero offset and supply voltage.

Measurement to Ratiometric V/V Signal Converter

This measurement to ratiometric voltage output calculator provides a way to determine the output reading and range of a ratiometric voltage signal sensing device from any measurement input, volts per volt span sensitivity, zero offset and supply voltage.

Torr to psi Conversion Table

Scroll down to a pressure from 1 to 1,000 Torr to see the matching reading in psi units.

psf to psi Conversion Table

Look up a value in pounds per square foot from 1 to 3,000 to obtain the converted value in pounds force per square inch units.

oz/in² to psi Conversion Table

Look up a value in ounces force per square inch from 1 to 2000 to obtain the converted value in pounds per square inch units.

N/mm² to psi Conversion Table

Pick out the vacuum or atmosphere pressure value you require from 1 to 1,000 newtons per square millimetre to determine the converted value in lbs/sq in units.

N/m² to psi Conversion Table

Pick out the vacuum or atmosphere pressure value you require from 1 to 200,000 newtons per square metre to determine the converted value in lbs/sq in units.

mmHg to psi Conversion Table

Scroll down to a pressure from 1 to 1,000 millimetres of mercury column to see the matching reading in psi units.

inHg to psi Conversion Table

Scroll down to a pressure from 0.01 to 40.00 inches of mercury column to see the matching reading in psi units.

g/cm² to psi Conversion Table

Look up a pressure value from 1 to 2000 grams/sq cm to find the equivalent value in pounds/sq in.

dyn/cm² to psi Conversion Table

Look up a pressure value in dynes per square centimetre from 1,000 to 2,000,000 to obtain the converted value in pounds per square inch units.

psi to Torr Conversion Table

Select a pressure in 0.01psi increment from 0.01 to 20.00 pounds force per square inch to see the matching pressure measured in torr units.

psi to psf Conversion Table

Look up a value in pounds per square inch from 0.01 to 20.00 to obtain the converted value in pounds force per square foot units.

psi to oz/in² Conversion Table

Look up a value in pounds per square inch from 0.1 to 100.0 to obtain the converted value in ounces force per square inch units.

psi to N/mm² Conversion Table

Pick out the high range pressure value you require from 100 to 100,000 lbs/sq in to determine the converted value in newtons per square millimetre units.

psi to N/m² Conversion Table

Pick out the vacuum or atmosphere pressure value you require from 0.01 to 20 lbs/sq in to determine the converted value in newtons per square metre units.

psi to g/cm² Conversion Table

Look up a value in pounds per square inch from 0.01 to 20.00 to obtain the converted value in grams per square centimetre.

psi to dyn/cm² Conversion Table

Look up a value in pounds per square inch from 0.01 to 20.00 to obtain the converted value in dynes per square centimetre.

Torr to bar Conversion Table

Pinpoint the pressure in torr pressure units from 1 to 1,000 to determine the value in bar units.

Pa to bar Conversion Table

Scroll down the Pa column and pick a pressure value between 100 and 200,000 pascals to view the equivalent value in bar.

N/mm2 to bar Conversion Table

Use this look-up table to convert any value between 1 to 1,000 newtons per square millimetre into bar.

N/m2 to bar Conversion Table

Use this look-up table to convert any value between 100 to 200,000 newtons per square metre into bar.

MPa to bar Conversion Table

Scroll down the MPa column and pick a pressure value between 1 and 1,000 megapascals to view the equivalent value in bar.

mmHg to bar Conversion Table

Pinpoint the pressure in millimetres of mercury column pressure units from 1 to 1,000 to determine the value in bar units.

mbar to bar Conversion Table

Pinpoint the pressure in millibar pressure units from 1 to 2,000 to determine the value in bar.

ksi (kilopounds per square inch) to bar Conversion Table

Use this list to convert from 1 to 1000 kilopound per square inch into bar pressure units.

kPa to bar Conversion Table

Scroll down the kPa column and pick a pressure value between 0.1 and 1,000 kilopascals to view the equivalent value in bar.

inHg to bar Conversion Table

Find a value from 0.01 to 40 inches of mercury column to determine the equivalent value in bar pressure units.

bar to inHg Conversion Table

Choose a value from 1 to 2.000 bar to determine the converted value in inches of mercury column pressure units.

inH2O to bar Conversion Table

Find a value from 1 to 1000 inches of water column to determine the equivalent value in bar pressure units.

hPa to bar Conversion Table

Pinpoint the pressure in hectopascal pressure units from 1 to 2,000 to determine the value in bar.

ftH2O to bar Conversion Table

Scroll down to the required water column height between 1 and 40,000 feet of water to find the matching hydrostatic water pressure in bar.

bar to Torr Conversion Table

Pinpoint the pressure in bar pressure units from 0.001 to 2 to determine the value in Torr pressure units.

bar to N/mm2 Conversion Table

Use this look-up table to convert any value between 0.001 to 2 bar into Newtons per square millimetre.

bar to mmHg Conversion Table

Pinpoint the pressure in bar pressure units from 0.001 to 2 to determine the value in millimetres of mercury column.

bar to N/m² Conversion Table

Use this look-up table to convert any value between 0.001 to 2 bar into Newtons per square metre.

bar to mbar Conversion Table

Pinpoint the pressure in bar pressure units from 0.001 to 2 to determine the value in millibars.

bar to hPa Conversion Table

Pinpoint the pressure in bar pressure units from 0.001 to 2 to determine the value in hectopascals.

mH2O to psi Conversion Table

Scroll down to a pressure from 0.1 to 10,000 meters of water column to see the matching reading in psi units.

inH2O to psi Conversion Table

Scroll down to a pressure from 1 to 1000 inches of water column to see the matching reading in psi units.

hPa to psi Conversion Table

Choose the value you want to convert from 1 to 2000 hectopascals to obtain the equivalent value in pounds per square inch.

mmHg to Pa (pascals) Conversion Table

Look-up below any value from 1 to 1000 millimetres of mercury to read off the equivalent value in pascals.

mmH2O to Pa (pascals) Conversion Table

Choose the required air pressure value between 0.1 and 100 millimetres of water and read off the matching pressure in pascals.

mmHg to mmH2O Conversion Table

Choose a vacuum pressure in millimeters of mercury column from 0.1 to 1,000 mmHg to cross reference the converted pressure in millimeters of water column.

kPa to mbar Conversion Table

Scroll down the kPa column and pick a pressure value between 0.2 and 200 kilopascals to view the equivalent value in millibars.

mH2O to kPa Conversion Table

Look up a metre of water column value from 0.1 to 100 to find the converted in value in kilopascal units.

mmHg to inHg Conversion Table

Choose readings from 0 to 1000 millimetres of mercury column to convert them into inches of mercury column.

mH2O to bar Conversion Table

Scroll down to the required water column height between 0.1 and 10,000 metres of water to find the matching hydrostatic water pressure in bar.

N/mm² to kg/cm² Conversion Table

Look up a pressure reading from 1 to 1000 newtons per sq mm to determine the equivalent value in kg per sq cm.

Wind power barometric pressure visual monitor with alarm relay switches

Visual barometric pressure indicator and pressure sensor with opening and closing alarm relay switches for use in conjunction with safety shut down circuits for wind power installations.

DCL 551 RS485 Modbus RTU Submersible Low Range Fuel, Oil & Wastewater Level Probe

Low range digital interface submersible liquid level probe with RS 485 Modbus RTU protocol serial bus communications for measuring level of fuel, oil and wastewater in low fill height open tanks.

DCL 571 RS485 Modbus RTU Submersible 22mm dia Groundwater & Wastewater Level Probe

22mm diameter digital interface submersible liquid level probe with RS 485 Modbus RTU protocol serial bus communications for installing in 1″ diameter tubes to measure groundwater level and measuring wastewater with nose cone removed.

Determine range of pressure gauge needed to measure force generated by hydraulic press

Work out what pressure gauge is needed based on the bore size of the cylinder and the maximum force generated by a press.

32…95°F Temperature Range Sensor with 4-20mA Current Output Signal Transmitter

Measure temperature over a 32 to 95 degrees Fahrenheit range and convert it to a 4 to 20 milliamps loop output signal.

0…35°C Temperature Range Sensor with 4-20mA Current Output Signal Transmitter

Measure temperature over a 0 to 35 degrees Celsius range and convert it to a 4 to 20 milliamps loop output signal.

14…140°F Temperature Range Sensor with 4-20mA Current Output Signal Transmitter

Measure temperature over a 14 to 140 degrees Fahrenheit range and convert it to a 4 to 20 milliamps loop output signal.

-10…+60°C Temperature Range Sensor with 4-20mA Current Output Signal Transmitter

Measure temperature over a -10 to +60 degrees Celsius range and convert it to a 4 to 20 milliamps loop output signal.

32…122°F Temperature Range Sensor with 4-20mA Current Output Signal Transmitter

Measure temperature over a 32 to 122 degrees Fahrenheit range and convert it to a 4 to 20 milliamps loop output signal.

0…50°C Temperature Range Sensor with 4-20mA Current Output Signal Transmitter

Measure temperature over a 0 to 50 degrees Celsius range and convert it to a 4 to 20 milliamps loop output signal.

32…212°F Temperature Range Sensor with 4-20mA Current Output Signal Transmitter

Measure temperature over a 32 to 212 degrees Fahrenheit range and convert it to a 4 to 20 milliamps loop output signal.

0…100°C Temperature Range Sensor with 4-20mA Current Output Signal Transmitter

Measure temperature over a 0 to 100 degrees Celsius range and convert it to a 4 to 20 milliamps loop output signal.

STT-26 Submersible Temperature Probe and Transmitter

Submersible 4-20mA output sensing probe for immersion in freshwater, seawater or any other compatible liquid to measure liquid temperature.

0-100mV to 0-10V Signal Conversion

Convert a 0 to 100 millivolts range measurement input signal into a 0 to 10 volts output signal.

0-100mV to 1-5V Signal Conversion

Convert a 0 to 100 millivolts range measurement input signal into a 1 to 5 volts output signal.

0-100mV to 0-5V Signal Conversion

Convert a 0 to 100 millivolts range measurement input signal into a 0 to 5 volts output signal.

0-100mV to 0-20mA Signal Conversion

Convert a 0 to 100 millivolts range measurement input signal into a 0 to 20 milliamps current output signal.

0-100mV to 4-20mA Signal Conversion

Convert a 0 to 100 millivolts range measurement input signal into a 4 to 20 milliamps loop output signal.

-5…+5V to 4…20mA Signal Conversion

Convert a -5 to +5 volts range measurement input signal into a 4 to 20 milliamps loop output signal.

-10…+10V to -5…+5V Bidirectional Signal Conversion

Convert a -10 to +10 volts range measurement input signal into a bidirectional -5 to +5 volts output signal.

-5…+5V to -10…+10V Bidirectional Signal Conversion

Convert a -5 to +5 volts range measurement input signal into a bidirectional -10 to +10 volts output signal.

4…20mA to -5…+5V Bidirectional Signal Conversion

Convert a 4 to 20 milliamps range measurement input signal into a bidirectional -5 to +5 volts output signal.

4…20mA to -10…+10V Bidirectional Signal Conversion

Convert a 4 to 20 milliamps range measurement input signal into a bidirectional -10 to +10 volts output signal.

1-5V to 0.5-4.5V Signal Conversion

Convert a 1 to 5 volts range measurement input signal into a 0.5 to 4.5 volts output signal.

0-10V to 0.5-4.5V Signal Conversion

Convert a 0 to 10 volts range measurement input signal into a 0.5 to 4.5 volts output signal.

0-5V to 0.5-4.5V Signal Conversion

Convert a 0 to 5 volts range measurement input signal into a 0.5 to 4.5 volts output signal.

0-20mA to 0.5-4.5V Signal Conversion

Convert a 0 to 20 milliamps range measurement input signal into a 0.5 to 4.5 volts output signal.

4-20mA to 0.5-4.5V Signal Conversion

Convert a 4 to 20 milliamps range measurement input signal into a 0.5 to 4.5 volts output signal.

0.5-4.5V to 0-10V Signal Conversion

Convert a 0.5 to 4.5 volts range measurement input signal into a 0 to 10 volts output signal.

0.5-4.5V to 1-5V Signal Conversion

Convert a 0.5 to 4.5 volts range measurement input signal into a 1 to 5 volts output signal.

0.5-4.5V to 0-5V Signal Conversion

Convert a 0.5 to 4.5 volts range measurement input signal into a 0 to 5 volts output signal.

0.5-4.5V to 0-20mA Signal Conversion

Convert a 0.5 to 4.5 volts range measurement input signal into a 0 to 20 milliamps current output signal.

0.5-4.5V to 4-20mA Signal Conversion

Convert a 0.5 to 4.5 volts range measurement input signal into a 4 to 20 milliamps loop output signal.

4-20mA to 20-4mA Signal Inversion

Invert a 4 to 20 milliamp current range measurement input signal into a 20 to 4 milliamp current output signal.

0-20mA to 20-0mA Signal Inversion

Invert a 0 to 20 milliamp current range measurement input signal into a 20 to 0 milliamp current output signal.

0-10V to 10-0V Signal Inversion

Invert a 0 to 10 volts range measurement input signal into a 10 to 0 volts output signal.

1-5V to 5-1V Signal Inversion

Invert a 1 to 5 volts range measurement input signal into a 5 to 1 volts output signal.

0-5V to 5-0V Signal Inversion

Invert a 0 to 5 volts range measurement input signal into a 5 to 0 volts output signal.

LMP305 Borehole Level Transmitter

Submersible stainless steel pressure transmitter ideal for geotechnical surveying with a 19mm diameter for measuring hydrostatic water level in bore-holes.

-10…+10V to 4…20mA Signal Conversion

Convert a -10 to +10 volts range measurement input signal into a 4 to 20 milliamps loop output signal.

STC-25 Temperature Cooling Adapter

Add-on temperature cooling accessory for isolating temperature sensitive measurement instrumentation with a ¼ inch BSP male thread from temperatures up to 200 degrees Celsius.

Borehole drawdown low voltage power supply 25m depth sensor

Low powered submersible level sensor with a 25 metre depth range, for use with a arduino controller to manage borehole drawdown and protect pump.

0.5-4.5V to 4.5-0.5V Signal Inversion

Invert a 0.5 to 4.5 volts range measurement input signal into a 4.5 to 0.5 volts output signal.

DCL 531 Modbus RTU RS 485 Submersible Stainless Steel Liquid Level Sensor

Digital submersible stainless steel liquid level sensor with a Modbus RTU protocol RS 485 serial bus interface.