Ratiometric V/V Signal to Measurement Converter

Voltage Input Parameters
Input Reading (V) [?]
Supply Voltage (V) [?]
Low Limit % Vsupp [?]
High Limit % Vsupp [?]
Zero Offset (V) [?]
Full Range Input (V) [?]
Measurement Output Parameters
Unit [?]
Low Limit [?]
High Limit [?]
Reading [?]

Click to reload page with unique web address for bookmarking or sharing current settings

✕ clear settings

Related Tools

Contents

User Guide

This ratiometric voltage input to measurement output converter provides a way to determine the measurement output reading and voltage input range from a ratiometric voltage input signal with a specified zero & span input to supply voltage % ratio, and supply voltage. A conversion scale graphic for each ratiometric voltage input range and measurement output range combination entered is also displayed underneath the calculated values.

Voltage Input Parameters

Reading (V)

This is the voltage input reading that you intend to convert to a measurement output value based on a specified output scaling

Supply Voltage (V)

This is the excitation voltage used to power the ratiometric V/V signal sensing device generating the voltage input signal. The voltage output of a ratiometric V/V signal generating device is linearly proportional to the excitation voltage.

Lowest Input (% Vsupp)

This is the lowest ratiometric input expressed as a % of the supply voltage. e.g. a 0.5-4.5Vdc input range, with a 5Vdc supply voltage, would be 10%.

Highest Input (% Vsupp)

This is the highest ratiometric input expressed as a % of the supply voltage. e.g. a 0.5-4.5Vdc input range, with a 5Vdc supply voltage, would be 90%.

Zero Offset (V)

This is the null input value of the ratiometric V/V signal generating device, powered by the specified supply voltage.

Full Range Input (V)

This the maximum voltage input for the ratiometric V/V signal generating device, powered by the specified supply voltage.

Measurement Output Parameters

Unit

Enter the measurement unit for the quantity which is being calculated, e.g. newtons, tonnes, micrometres, psi, degrees Celsius, etc…

Lowest Output

Enter the minimum measurement output to be converted from the ratiometric V/V signal input.

Highest Output

Enter the maximum measurement output to be converted from the ratiometric V/V signal input.

Reading

This is the measurement output value converted from the entered voltage input signal reading and associated parameters.