-2 to 2 inHg g 4-20mA out intake and exhaust air pressure sensor for building management use

A high accuracy bidirectional range gauge pressure sensor for building management use to measure pressure of air intake and exhaust over a range of -2 to 2 inHg g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the waterproof cable electrical connection.

1000 barg 4-20mA output synthetic oil pressure sensor for hydraulic pump controls

A high range pressure sensor for hydraulic pump use use to measure pressure of synthetic hydraulic oil over a range of 0 to 1,000 bar g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection to a microprocessor.

-200 to 200 Pa bi-directional range 4-20mA output dp pressure transmitter for venturi tube

A bidirectional low range pressure transmitter for venturi tube use to measure pressure of air in a venturi tube over a range of -200 to 200 Pa from the 6.6mm dia x 11mm barbed connections process connection, and sending the corresponding 4-20mA signal through the M12 x 1.5 cable glands with 5 internal screw terminals electrical connection.

0-50 mbarg 4-20 mA output natural gas monitoring pressure sensor

Economical stainless steel diaphragm pressure sensor with semiconductor strain gauges for measuring natural gas pressure over a 0-50 mbar gauge pressure range and generating a 4 to 20 milliamps output signal.

350 bar, 5000 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…350 bar or 0…5000 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

250 bar, 3500 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…250 bar or 0…3500 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

160 bar, 2500 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…160 bar or 0…2500 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

35 bar, 500 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…35 bar or 0…500 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

25 bar, 350 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…25 bar or 0…350 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

16 bar, 250 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…16 bar or 0…250 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

1600 barg 4-20mA freshwater pressure sensor for hydrostatic testing

A high range gauge pressure sensor for hydrostatic pressure testing use to measure pressure of freshwater over a range of 0 to 1,600 bar g from the 9/16 UNF process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.

5 barg 4-20mA output pressure sensor for steam sterilization up to 150C/300F

A high temperature media protected pressure sensor for steam sterilizing use to measure pressure of steam over a range of 0 to 5 bar g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.

3.5 bar, 50 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…3.5 bar or 0…50 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

2.5 bar, 35 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…2.5 bar or 0…35 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

-3 to 4 mbar dp range 4-20mA ATEX approved biogas pressure sensor for process control use on a 1bar line

A low range differential pressure sensor for process control use to measure pressure of biogas over a range of -3 to 4 mbar diff on a 1 bar biogas line from two 1/4 NPT female process connections, and sending the corresponding 4-20mA signal through the weatherproof cable electrical connection.

25 bar gauge range ratiometric 0.5 to 4.5 volts output ceramic diaphragm pressure sensor

Economical corrosion resistant ceramic diaphragm pressure sensor for measuring over a 0 to 25 bar gauge pressure range and generating a ratiometric 0.5 to 4.5 volts output signal.

15 psig leak testing air pressure gauge with 1/4 NPT male fitting

Digital display pressure gauge for portable use in air pressure leak test applications, capable of measuring 0 to 15 psi g pressure with 0.1% accuracy and connected using a 1/4 NPT male fitting.

350 mbar, 5 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…350 mbar or 0…5 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

250 mbar, 4 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…250 mbar or 0…4 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

150psig range wireless pressure sensing kit for leak testing use

Wireless pressure measurement kit for plumbing system leak testing use with a 150psig range plus a 1/4 NPT male fitting. Each pressure reading is transmitted wirelessly to a single channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.

150 mbar, 2 psi Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…150 mbar or 0…2 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

25 mbar, 10 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…25 mbar or 0…10 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

3m range 4-20mA submersible freshwater tank level sensor for dust suppression systems

A submersible liquid level sensor for submerging in a dust suppression system freshwater tank and measuring the depth over a range of 0 to 3m from the flush diaphragm, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.

3000 psia high accuracy 0-10Vdc out pressure sensor for leak checking pressurized tanks

A high accuracy absolute high range pressure sensor for pressurized tank leak testing use to measure pressure of freshwater over a range of 0 to 3,000 psi absolute from the 1/4 NPT male process connection, and sending the corresponding 0-10Vdc signal through the waterproof cable electrical connection.

15 mbar, 6 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…15 mbar or 0…6 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

7.5 mbar, 3 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…7.5 mbar or 0…3 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

2.5 mbar, 1 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…2.5 mbar or 0…1 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

ProSens Environmental Monitor and Controller

The ProSens environmental monitor and controller is an industrial interface instrument which integrates a transmitter, display, meter and controller functions in one box.

90 mbar, 36 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…90 mbar or 0…36 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

80 mbar, 32 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…80 mbar or 0…32 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

70 mbar, 28 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…70 mbar or 0…28 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

60 mbar, 24 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…60 mbar or 0…24 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

50 mbar, 20 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…50 mbar or 0…20 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

20 bar absolute low response time 4-20mA output dynamic freshwater pressure sensor for research use

A low response time absolute pressure sensor for research use to measure pressure of freshwater over a range of 0 to 20 bar abs from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.

40 bar absolute 0-20mA output air pressure sensor for pneumatic monitoring

An absolute pneumatic pressure monitoring sensor for compressed air use to measure pressure of air over a range of 0 to 40 bar abs from the 1/4 BSP P male process connection, and sending the corresponding 0-20mA signal through the weatherproof cable electrical connection.

40 mbar, 16 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…40 mbar or 0…16 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

30 mbar, 12 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…30 mbar or 0…12 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

20 mbar, 8 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…20 mbar or 0…8 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

600 barg 4-20mA pressure transducer for mobile crane hydraulic control use

A high gauge pressure transducer for hydraulic control use to measure pressure of mineral hydraulic oil on a mobile crane over a range of 0 to 600 bar abs from the 1/4 BSP P male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.

30 psi absolute portable calibration data logging air pressure gauge with 1/4 NPT male fitting

Digital display pressure gauge for portable calibration use in air measurement applications, capable of measuring 0 to 30 psi abs pressure with 0.1% accuracy and connected using a 1/4 NPT male fitting. Also includes USB, logger, and data transfer software.

120cm range 4-20mA submersible chemical tank level sensor for farm water line mineral injection

A plastic submersible liquid level sensor for submerging in a chemical tank used for injecting minerals into water lines on farms, and measuring the depth over a range of 0 to 120 cm from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.

10 mbar, 4 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…10 mbar or 0…4 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

9 mbar, 3.6 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…9 mbar or 0…3.6 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

8 mbar, 3.2 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…8 mbar or 0…3.2 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

7 mbar, 2.8 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…7 mbar or 0…2.8 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

6 mbar, 2.4 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…6 mbar or 0…2.4 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

5 mbar, 2 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…5 mbar or 0…2 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

4 mbar, 1.6 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…4 mbar or 0…1.6 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

3 mbar, 1.2 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…3 mbar or 0…1.2 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

2 mbar, 0.8 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…2 mbar or 0…0.8 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

1 mbar, 0.4 inH2O Range 0-10 V, 0-5 V, 1-5 V Output Pressure Sensors

0…1 mbar or 0…0.4 inH2O pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.

500 psi absolute range HART enabled 4-20mA output diesel pressure sensor for pipeline leak testing use

A HART coms enabled absolute pressure sensor for pipeline leak testing use to measure pressure of diesel over a range of 0 to 500 psi abs from the 1/2 NPT male process connection, and sending the corresponding 4-20mA signal through the mil-spec connector electrical connection.

1 barg IS certified 4-20mA submersible leachate pressure sensor for tank level gauging use

An intrinsically safe submersible wastewater gauge pressure sensor for tank level gauging use to measure pressure of leachate over a range of 0 to 1 bar g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.

40ft range 4-20mA output submersible hydroelectric dam headwater level sensor

A submersible headwater level sensor for submerging in a hydroelectric dam river and measuring the depth over a range of 0 to 40ft from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.

3 psig range 4-20mA output natural gas pressure sensor for building boiler heating use

A low range gauge pressure sensor for building system boiler heating use to measure pressure of natural gas over a range of 0 to 3 psi g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.

300 psi g range 0-10 volts output ceramic diaphragm pressure sensor

Economical corrosion resistant ceramic diaphragm pressure sensor for measuring over a 0 to 300 pounds per square inch gauge pressure range and generating a 0 to 10 volts output signal.

10m range high resolution 4-20mA out submersible freshwater tank level sensor

A high resolution submersible water level sensor for submerging in a freshwater tank and measuring the depth over a range of 0 to 10m from the flush diaphragm, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.

250 bar, 3500 psi, 250 kg/cm2, 25 MPa Range 4-20 mA Output Pressure Sensors

0…250 bar, 0…3500 psi, 0…250 kg/cm2, or 0…25 MPa pressure range, 4…20 mA output signal pressure sensors.

160 bar, 2500 psi, 160 kg/cm2, 16 MPa Range 4-20 mA Output Pressure Sensors

0…160 bar, 0…2500 psi, 0…160 kg/cm2, or 0…16 MPa pressure range, 4…20 mA output signal pressure sensors.

10m high chemical tank 4-20mA output submersible PVC and ceramic protected liquid level sensor

A submersible PVC and ceramic based construction liquid level sensor for submerging in a gravity drained or pumped liquid chemical tank and measuring the depth over a range of 0 to 10m from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.

6,000 psig ATEX/IECEx IS approved 4-20mA pressure sensor for oil pumping use

An intrinsically safe all welded stainless steel gauge pressure sensor for oil pumping use to measure pressure of pumped oil over a range of 0 to 6,000 psi g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the weatherproof cable electrical connection.

5 metre range high accuracy 4-20mA output non-corrosive liquid level sensor with G1/4 male external fitting

A high accuracy externally mounted liquid level sensor for measuring the height of non-corrosive liquids over a range of 0 to 5m from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the weatherproof cable gland electrical connection.

35 bar, 500 psi, 35 kg/cm2, 3.5 MPa Range 4-20 mA Output Pressure Sensors

0…35 bar, 0…500 psi, 0…35 kg/cm2, or 0…3.5 MPa pressure range, 4…20 mA output signal pressure sensors.

25 bar, 350 psi, 25 kg/cm2, 2.5 MPa Range 4-20 mA Output Pressure Sensors

0…25 bar, 0…350 psi, 0…25 kg/cm2, or 0…2.5 MPa pressure range, 4…20 mA output signal pressure sensors.

16 bar, 250 psi, 16 kg/cm2, 1.6 MPa Range 4-20 mA Output Pressure Sensors

0…16 bar, 0…250 psi, 0…16 kg/cm2, or 0…1.6 MPa pressure range, 4…20 mA output signal pressure sensors.

3.5 bar, 50 psi, 3.5 kg/cm2, 350 kPa Range 4-20 mA Output Pressure Sensors

0…3.5 bar, 0…50 psi, 0…3.5 kg/cm2, or 0…350 kPa pressure range, 4…20 mA output signal pressure sensors.

2.5 bar, 35 psi, 2.5 kg/cm2, 250 kPa Range 4-20 mA Output Pressure Sensors

0…2.5 bar, 0…35 psi, 0…2.5 kg/cm2, or 0…250 kPa pressure range, 4…20 mA output signal pressure sensors.

4 barg 4-20mA output ceramic diaphragm pressure sensor with G1/4 female

Economical corrosion resistant ceramic diaphragm pressure sensor with G1/4 female process connection for measuring over a 0 to 4 bar gauge pressure range and generating a 4 to 20 milliamps output signal.

280 inch range 4-20mA output urea tank flush diaphragm level sensor

An externally mounted tank level sensor for measuring the height of urea over a range of 0 to 280in from the G3/4 male DIN3852 with flush diaphragm process connection, and sending the corresponding 4-20mA signal through the flood proof cable electrical connection.

350 mbar, 5 psi, 140 inH2O, 35 kPa Range 4-20 mA Output Pressure Sensors

0…350 mbar, 0…5 psi, 0…140 inH2O, or 0…35 kPa pressure range, 4…20 mA output signal pressure sensors.

250 mbar, 4 psi, 100 inH2O, 25 kPa Range 4-20 mA Output Pressure Sensors

0…250 mbar, 0…4 psi, 0…100 inH2O, or 0…25 kPa pressure range, 4…20 mA output signal pressure sensors.

150 mbar, 2 psi, 60 inH2O, 15 kPa Range 4-20 mA Output Pressure Sensors

0…150 mbar, 0…2 psi, 0…60 inH2O, or 0…15 kPa pressure range, 4…20 mA output signal pressure sensors.

LevCal Submersible Hydrostatic Liquid Level Sensor Calibration Kit

Pressure calibration kit for calibrating a submersible hydrostatic liquid level sensor out of the water using a battery powered automatic pressure controller calibrator to generate and accurate source of air pressure, and the necessary test hose and adapters to attach to the different types and styles of submersible pressure sensor probe ends.

25 mbar, 10 inH2O, 2500 Pa, 6 oz/in2 Range 4-20 mA Output Pressure Sensors

0…25 mbar, 0…10 inH2O, 0…2500 Pa, or 0…6 oz/in2 pressure range, 4…20 mA output signal pressure sensors.

15 mbar, 6 inH2O, 1500 Pa, 3.5 oz/in2 Range 4-20 mA Output Pressure Sensors

0…15 mbar, 0…6 inH2O, 0…1500 Pa, or 0…3.5 oz/in2 pressure range, 4…20 mA output signal pressure sensors.

7.5 mbar, 3 inH2O, 750 Pa, 1.7 oz/in2 Range 4-20 mA Output Pressure Sensors

0…7.5 mbar, 0…3 inH2O, 0…750 Pa, or 0…1.7 oz/in2 pressure range, 4…20 mA output signal pressure sensors.

2.5 mbar, 1 inH2O, 250 Pa, 0.6 oz/in2 Range 4-20 mA Output Pressure Sensors

0…2.5 mbar, 0…1 inH2O, 0…250 Pa, or 0…0.6 oz/in2 pressure range, 4…20 mA output signal pressure sensors.

-20 to +50 psig 0-10V out compound range liquid dispensing pressure sensor

Positive and negative range pressure sensor for measuring liquid dispensing pressure over a -20 to +50 pounds per square inch gauge pressure range and generating a 0 to 10 volts output signal.

-1 to 20 bar g compound range IS 4-20mA propane pressure sensor for process control use

An intrinsically safe compound range pressure sensor for process control use to measure pressure of propane gas over a range of -1 to 20 bar g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.

20 MPa g range 4-20mA output high pressure sensor and plug-on display for hydraulic control use

A high pressure sensor and plug-on display for hydraulic control use to measure pressure of mineral hydraulic oil over a range of 0 to 20 MPa g from the G1/8 male process connection, and sending the corresponding 4-20mA current loop signal through the DIN plug connector electrical connection.

-0.5 to +0.5 bar gauge 0-5 volts output compound range pressure sensor

OEM compound low range gauge pressure sensor with semiconductor strain gauges for measuring over a -0.5 to +0.5 bar gauge pressure range and generating a 0 to 5 volts output signal.

10 bar absolute I2C interface air pressure sensor

An absolute digital pressure sensor for measuring the pressure of air over a range of 0 to 10 bar absolute from the G1/4 male process connection, and sending the corresponding I2C interface through the weatherproof cable gland electrical connection.

150 psig RS485 Modbus RTU chilled water pressure sensor for supply and return monitoring

A digital interface pressure sensor for flow monitoring use to measure pressure of chilled water supply & return over a range of 0 to 150 psi g from the 1/4 NPT male process connection, and sending the corresponding RS485 Modbus RTU protocol interface through the weatherproof cable electrical connection.

90 mbar, 36 inH2O, 9000 Pa, 1.3 psi Range 4-20 mA Output Pressure Sensors

0…90 mbar, 0…36 inH2O, 0…9000 Pa, or 0…1.3 psi pressure range, 4…20 mA output signal pressure sensors.

80 mbar, 32 inH2O, 8000 Pa, 1.2 psi Range 4-20 mA Output Pressure Sensors

0…80 mbar, 0…32 inH2O, 0…8000 Pa, or 0…1.2 psi pressure range, 4…20 mA output signal pressure sensors.

70 mbar, 28 inH2O, 7000 Pa, 1 psi Range 4-20 mA Output Pressure Sensors

0…70 mbar, 0…28 inH2O, 0…7000 Pa, or 0…1 psi pressure range, 4…20 mA output signal pressure sensors.

-15psig 0-10V out negative pressure transducer and display for air extraction use

A digital display pressure transducer for air extraction use to measure negative pressure difference of air inlet over a range of 0 to -15 psi g from a 1/4 NPT male process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.

16 inch range 4-20mA output submersible shallow water tank level sensor

A low range submersible liquid level sensor for submerging in a shallow water tank and measuring the depth over a range of 0 to 16in from the flush open face diaphragm, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.