0…3.5 bar or 0…50 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
These pressure sensors will measure from 0 to 3.5 bars or 0 to 50 pounds per square inch pressure ranges, and convert the measured pressure to a corresponding output signal from 0 to 10 volts, 0 to 5 volts, or 1 to 5 volts.
-20 to +50 psig 0-10V out compound range liquid dispensing pressure sensor
50 psi wet/wet 0-10 volt output differential pressure transducer
50 psi g air pressure sensor with 10Vdc signal out
50 psi g freshwater pressure transducer with 10 Vdc output signal
50 psi absolute 0-5Vdc output natural gas pressure sensor for boiler control use
Calibration Tables
0…3.5 bar to 0…10 V
Use this table to determine the exact calibration points for a 0…3.5 bars range to 0…10 volts output pressure sensor. For additional calibration points use our 0…3.5 bar to 0…10 V converter and enter any value.
| % Scale | 0…3.5bar | 0…10V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 0.35 | 1.00 |
| 20 | 0.70 | 2.00 |
| 30 | 1.05 | 3.00 |
| 40 | 1.40 | 4.00 |
| 50 | 1.75 | 5.00 |
| 60 | 2.10 | 6.00 |
| 70 | 2.45 | 7.00 |
| 80 | 2.80 | 8.00 |
| 90 | 3.15 | 9.00 |
| 100 | 3.50 | 10.00 |
Request product information for a 0...3.5 bar to 0...10 V pressure sensor that matches the input and output measurement range from the calibration table above.
0…50 psi to 0…10 V
Use this table to determine the exact calibration points for a 0…50 pounds per square inch range to 0…10 volts output pressure sensor. For additional calibration points use our 0…50 psi to 0…10 V converter and enter any value.
| % Scale | 0…50psi | 0…10V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 5.00 | 1.00 |
| 20 | 10.00 | 2.00 |
| 30 | 15.00 | 3.00 |
| 40 | 20.00 | 4.00 |
| 50 | 25.00 | 5.00 |
| 60 | 30.00 | 6.00 |
| 70 | 35.00 | 7.00 |
| 80 | 40.00 | 8.00 |
| 90 | 45.00 | 9.00 |
| 100 | 50.00 | 10.00 |
Request product information for a 0...50 psi to 0...10 V pressure sensor that matches the input and output measurement range from the calibration table above.
0…3.5 bar to 0…5 V
Use this table to determine the exact calibration points for a 0…3.5 bars range to 0…5 volts output pressure sensor. For additional calibration points use our 0…3.5 bar to 0…5 V converter and enter any value.
| % Scale | 0…3.5bar | 0…5V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 0.35 | 0.50 |
| 20 | 0.70 | 1.00 |
| 30 | 1.05 | 1.50 |
| 40 | 1.40 | 2.00 |
| 50 | 1.75 | 2.50 |
| 60 | 2.10 | 3.00 |
| 70 | 2.45 | 3.50 |
| 80 | 2.80 | 4.00 |
| 90 | 3.15 | 4.50 |
| 100 | 3.50 | 5.00 |
Request product information for a 0...3.5 bar to 0...5 V pressure sensor that matches the input and output measurement range from the calibration table above.
0…50 psi to 0…5 V
Use this table to determine the exact calibration points for a 0…50 pounds per square inch range to 0…5 volts output pressure sensor. For additional calibration points use our 0…50 psi to 0…5 V converter and enter any value.
| % Scale | 0…50psi | 0…5V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 5.00 | 0.50 |
| 20 | 10.00 | 1.00 |
| 30 | 15.00 | 1.50 |
| 40 | 20.00 | 2.00 |
| 50 | 25.00 | 2.50 |
| 60 | 30.00 | 3.00 |
| 70 | 35.00 | 3.50 |
| 80 | 40.00 | 4.00 |
| 90 | 45.00 | 4.50 |
| 100 | 50.00 | 5.00 |
Request product information for a 0...50 psi to 0...5 V pressure sensor that matches the input and output measurement range from the calibration table above.
0…3.5 bar to 1…5 V
Use this table to determine the exact calibration points for a 0…3.5 bars range to 1…5 volts output pressure sensor. For additional calibration points use our 0…3.5 bar to 1…5 V converter and enter any value.
| % Scale | 0…3.5bar | 1…5V |
|---|---|---|
| 0 | 0.00 | 1.00 |
| 10 | 0.35 | 1.40 |
| 20 | 0.70 | 1.80 |
| 30 | 1.05 | 2.20 |
| 40 | 1.40 | 2.60 |
| 50 | 1.75 | 3.00 |
| 60 | 2.10 | 3.40 |
| 70 | 2.45 | 3.80 |
| 80 | 2.80 | 4.20 |
| 90 | 3.15 | 4.60 |
| 100 | 3.50 | 5.00 |
Request product information for a 0...3.5 bar to 1...5 V pressure sensor that matches the input and output measurement range from the calibration table above.
0…50 psi to 1…5 V
Use this table to determine the exact calibration points for a 0…50 pounds per square inch range to 1…5 volts output pressure sensor. For additional calibration points use our 0…50 psi to 1…5 V converter and enter any value.
| % Scale | 0…50psi | 1…5V |
|---|---|---|
| 0 | 0.00 | 1.00 |
| 10 | 5.00 | 1.40 |
| 20 | 10.00 | 1.80 |
| 30 | 15.00 | 2.20 |
| 40 | 20.00 | 2.60 |
| 50 | 25.00 | 3.00 |
| 60 | 30.00 | 3.40 |
| 70 | 35.00 | 3.80 |
| 80 | 40.00 | 4.20 |
| 90 | 45.00 | 4.60 |
| 100 | 50.00 | 5.00 |
Request product information for a 0...50 psi to 1...5 V pressure sensor that matches the input and output measurement range from the calibration table above.