0…70 mbar, 0…28 inH2O, 0…7000 Pa, or 0…1 psi pressure range, 4…20 mA output signal pressure sensors.
These pressure sensors will measure from 0 to 70 millibars, 0 to 28 inches of water column, 0 to 7000 pascals, or 0 to 1 pounds per square inch pressure ranges, and convert the measured pressure to a corresponding output signal from 4 to 20 milliamps.
1psi wet/wet differential pressure transmitter for 2000 psi line pressure
1 psig low range 4-20 mA output pressure sensor
-2 to 2 inHg g 4-20mA out intake and exhaust air pressure sensor for building management use
Low operating temperature plus/minus 1 psi pressure transmitter
+/- 30 inches of water compound range pressure transmitter
Low vacuum leak detection 4-20mA current loop sensor & gauge
1 psi delta pressure sensor with 4 to 20 mA output
Calibration Tables
0…70 mbar to 4…20 mA
Use this table to determine the exact calibration points for a 0…70 millibars range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…70 mbar to 4…20 mA converter and enter any value.
% Scale | 0…70mbar | 4…20mA |
---|---|---|
0 | 0.00 | 4.00 |
10 | 7.00 | 5.60 |
20 | 14.00 | 7.20 |
30 | 21.00 | 8.80 |
40 | 28.00 | 10.40 |
50 | 35.00 | 12.00 |
60 | 42.00 | 13.60 |
70 | 49.00 | 15.20 |
80 | 56.00 | 16.80 |
90 | 63.00 | 18.40 |
100 | 70.00 | 20.00 |
Request product information for a 0...70 mbar to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.
0…28 inH2O to 4…20 mA
Use this table to determine the exact calibration points for a 0…28 inches of water column range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…28 inH2O to 4…20 mA converter and enter any value.
% Scale | 0…28inH2O | 4…20mA |
---|---|---|
0 | 0.00 | 4.00 |
10 | 2.80 | 5.60 |
20 | 5.60 | 7.20 |
30 | 8.40 | 8.80 |
40 | 11.20 | 10.40 |
50 | 14.00 | 12.00 |
60 | 16.80 | 13.60 |
70 | 19.60 | 15.20 |
80 | 22.40 | 16.80 |
90 | 25.20 | 18.40 |
100 | 28.00 | 20.00 |
Request product information for a 0...28 inH2O to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.
0…7000 Pa to 4…20 mA
Use this table to determine the exact calibration points for a 0…7000 pascals range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…7000 Pa to 4…20 mA converter and enter any value.
% Scale | 0…7000Pa | 4…20mA |
---|---|---|
0 | 0.00 | 4.00 |
10 | 700.00 | 5.60 |
20 | 1,400.00 | 7.20 |
30 | 2,100.00 | 8.80 |
40 | 2,800.00 | 10.40 |
50 | 3,500.00 | 12.00 |
60 | 4,200.00 | 13.60 |
70 | 4,900.00 | 15.20 |
80 | 5,600.00 | 16.80 |
90 | 6,300.00 | 18.40 |
100 | 7,000.00 | 20.00 |
Request product information for a 0...7000 Pa to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.
0…1 psi to 4…20 mA
Use this table to determine the exact calibration points for a 0…1 pounds per square inch range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…1 psi to 4…20 mA converter and enter any value.
% Scale | 0…1psi | 4…20mA |
---|---|---|
0 | 0.00 | 4.00 |
10 | 0.10 | 5.60 |
20 | 0.20 | 7.20 |
30 | 0.30 | 8.80 |
40 | 0.40 | 10.40 |
50 | 0.50 | 12.00 |
60 | 0.60 | 13.60 |
70 | 0.70 | 15.20 |
80 | 0.80 | 16.80 |
90 | 0.90 | 18.40 |
100 | 1.00 | 20.00 |
Request product information for a 0...1 psi to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.