0…50 mbar, 0…20 inH2O, 0…5000 Pa, or 0…0.75 psi pressure range, 4…20 mA output signal pressure sensors.
These pressure sensors will measure from 0 to 50 millibars, 0 to 20 inches of water column, 0 to 5000 pascals, or 0 to 0.75 pounds per square inch pressure ranges, and convert the measured pressure to a corresponding output signal from 4 to 20 milliamps.
Negative 500 mmH2O g range 4-20mA output pressure sensor
Natural gas booster pump inlet/outlet pressure transmitters for backup power generators
50 mbar ATEX approved air duct pressure sensor
0-50 mbarg 4-20 mA output natural gas monitoring pressure sensor
50 millibar hazardous area air pressure sensor with 4-20mA out and 1/2 NPT male fitting
20 inH2Og range 4-20mA output natural gas pressure transducer for commercial generator use
50mbarg range 4-20mA output petrol fill level pressure sensor for automotive testing use
20 inWG Liquid compatible pressure transmitter
High temperature air pressure transmitter with 0.5 mH2O range
Calibration Tables
0…50 mbar to 4…20 mA
Use this table to determine the exact calibration points for a 0…50 millibars range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…50 mbar to 4…20 mA converter and enter any value.
| % Scale | 0…50mbar | 4…20mA |
|---|---|---|
| 0 | 0.00 | 4.00 |
| 10 | 5.00 | 5.60 |
| 20 | 10.00 | 7.20 |
| 30 | 15.00 | 8.80 |
| 40 | 20.00 | 10.40 |
| 50 | 25.00 | 12.00 |
| 60 | 30.00 | 13.60 |
| 70 | 35.00 | 15.20 |
| 80 | 40.00 | 16.80 |
| 90 | 45.00 | 18.40 |
| 100 | 50.00 | 20.00 |
Request product information for a 0...50 mbar to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.
0…20 inH2O to 4…20 mA
Use this table to determine the exact calibration points for a 0…20 inches of water column range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…20 inH2O to 4…20 mA converter and enter any value.
| % Scale | 0…20inH2O | 4…20mA |
|---|---|---|
| 0 | 0.00 | 4.00 |
| 10 | 2.00 | 5.60 |
| 20 | 4.00 | 7.20 |
| 30 | 6.00 | 8.80 |
| 40 | 8.00 | 10.40 |
| 50 | 10.00 | 12.00 |
| 60 | 12.00 | 13.60 |
| 70 | 14.00 | 15.20 |
| 80 | 16.00 | 16.80 |
| 90 | 18.00 | 18.40 |
| 100 | 20.00 | 20.00 |
Request product information for a 0...20 inH2O to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.
0…5000 Pa to 4…20 mA
Use this table to determine the exact calibration points for a 0…5000 pascals range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…5000 Pa to 4…20 mA converter and enter any value.
| % Scale | 0…5000Pa | 4…20mA |
|---|---|---|
| 0 | 0.00 | 4.00 |
| 10 | 500.00 | 5.60 |
| 20 | 1,000.00 | 7.20 |
| 30 | 1,500.00 | 8.80 |
| 40 | 2,000.00 | 10.40 |
| 50 | 2,500.00 | 12.00 |
| 60 | 3,000.00 | 13.60 |
| 70 | 3,500.00 | 15.20 |
| 80 | 4,000.00 | 16.80 |
| 90 | 4,500.00 | 18.40 |
| 100 | 5,000.00 | 20.00 |
Request product information for a 0...5000 Pa to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.
0…0.75 psi to 4…20 mA
Use this table to determine the exact calibration points for a 0…0.75 pounds per square inch range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…0.75 psi to 4…20 mA converter and enter any value.
| % Scale | 0…0.75psi | 4…20mA |
|---|---|---|
| 0 | 0.000 | 4.00 |
| 10 | 0.075 | 5.60 |
| 20 | 0.150 | 7.20 |
| 30 | 0.225 | 8.80 |
| 40 | 0.300 | 10.40 |
| 50 | 0.375 | 12.00 |
| 60 | 0.450 | 13.60 |
| 70 | 0.525 | 15.20 |
| 80 | 0.600 | 16.80 |
| 90 | 0.675 | 18.40 |
| 100 | 0.750 | 20.00 |
Request product information for a 0...0.75 psi to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.