A submersible PP-HT and ceramic based construction liquid level sensor for submerging in a gravity drained or pumped liquid chemical tank and measuring the depth over a range of 0 to 10m from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
This LMK 807 submersible chemical tank liquid level sensor which has a nose cone to protect the sensor diaphragm is used to measure the liquid height from 0 to 10 metres to monitor gravity drained or pumped liquid chemical storage tank contents.
The sensor is installed by lowering it into the liquid chemical tank until the nose cone reaches the required measurement point. The measured level is sent using a 4 to 20 milliamp current output signal through the submersible IP68 sealed cable to connected chemical liquid level monitoring instrumentation.
This version of the LMK 807 sensor has a PP-HT housing and coated cable plus a ceramic sensing diaphragm which highly resistant to many corrosive liquid chemicals used in gravity drained and pumped tank processes.
LMK 807 Submersible PVC & Ceramic Liquid Level Sensor
- SKU ID: s1-lmk807-51-19924
- Pressure Range: 0 to 10
- Units: mH2O
- Reference Type: Gauge / Vented (atm to +P)
- Output Signal: 4-20mA, 2 wire
- Accuracy: 0.5% FS
- Installation Type: Submersible probe with flush diaphragm and detachable nose cone
- Housing Material: PP-HT
- Diaphragm Material: Ceramic Al2O3 96%
- Media Exposed Seals: FKM
- Cable Type: PVC (70degC max)
- Cable Length: 15
- Cable Length Units: Metres (m)