Combined Temperature and Hydrostatic Liquid Level Sensors

These sensors provide simultaneous measurement of both hydrostatic pressure and temperature, enabling precise level determination even when liquid density varies due to temperature fluctuations.

Small Diameter Borehole Hydrostatic Liquid Level Sensors

These specialized sensors are designed for precise groundwater level measurements in narrow boreholes commonly used in geotechnical investigations and environmental monitoring.

Marine Approved Hydrostatic Liquid Level Sensors

Marine approved hydrostatic liquid level sensors provide accurate and reliable level measurement of seawater ballast, diesel fuel, wastewater, and liquid cargo in harsh marine environments.

Freshwater Hydrostatic Liquid Level Sensors

Liquid level sensors for measuring the level of freshwater in tanks, boreholes, reservoirs, rivers, canals, streams and wells.

Plastic Submersible Hydrostatic Liquid Level Sensors

Explore our selection of corrosion-resistant submersible hydrostatic level sensors specifically designed for challenging chemical applications

Plastic Externally Fitted Hydrostatic Liquid Level Sensors

Plastic externally fitted hydrostatic level sensors with ceramic diaphragms offer a reliable and cost-effective solution for measuring liquid levels in chemical storage tanks.

Brackish Water Hydrostatic Liquid Level Sensors

Brackish water hydrostatic level sensors are specifically designed for continuous submersion in coastal and estuarine environments where fresh and saltwater mix

Hazardous Area Submersible Hydrostatic Liquid Level Sensors

Explore our range of intrinsically safe (IS) submersible hydrostatic level sensors, designed for accurate liquid level measurement in hazardous environments

Sea Water Resistant Ship Use Certified Pressure Transmitters

These pressure transmitters are specifically engineered to handle the harsh conditions found in shipboard and marine environments. Constructed with corrosion-resistant wetted parts suitable for seawater and certified for marine use

Pressure Sensor Technology Comparative Guide

This guide provides a comparative analysis of various pressure sensor technologies, including bonded foil strain gauge, ceramic diaphragm thick film strain gauge, ceramic diaphragm variable capacitance, thin film strain gauge, and silicon sensors.

Variable Capacitance Ceramic Pressure Sensors

These are a type of sensor that uses a ceramic diaphragm combined with a variable capacitance sensing device to measure pressure.

Ceramic Thick Film Pressure Sensors

This is a type of sensor which utilises a measurement technology that comprises of a ceramic diaphragm and thick film strain gauges to measure pressure.

0-10V to SqRt 0-10V Square Root Extraction Signal Conversion

Convert a linear 0 to 10 volts range measurement input signal into square root extraction 0 to 10 volts output signal.

1-5V to SqRt 1-5V Square Root Extraction Signal Conversion

Convert a linear 1 to 5 volts range measurement input signal into square root extraction 1 to 5 volts output signal.

0-5V to SqRt 0-5V Square Root Extraction Signal Conversion

Convert a linear 0 to 5 volts range measurement input signal into square root extraction 0 to 5 volts output signal.

0-20mA to SqRt 0-20mA Square Root Extraction Signal Conversion

Convert a linear 0 to 20 milliamps range measurement input signal into square root extraction 0 to 20 milliamps output signal.

4-20mA to SqRt 4-20mA Square Root Extraction Signal Conversion

Convert a linear 4 to 20 milliamps range measurement input signal into square root extraction 4 to 20 milliamps output signal.

DPT100 Modbus RTU RS485 Differential Pressure Sensor

The DPT 100 is a high-accuracy differential pressure transmitter designed for fast test processes in leakage and flow measurement applications where rapid response time and high sampling rates are essential

0-10mA to 4-20mA Signal Conversion

Convert a 0 to 10 milliamps range measurement input signal into a 4 to 20 milliamps output signal.

4-20mA to 0-10mA Signal Conversion

Convert a 4 to 20 milliamps range measurement input signal into 0 to 10 milliamps output signal.

4-20mA to 0-2.5V Signal Conversion

Convert a 4 to 20 milliamps range measurement input signal into a 0 to 2.5 volts output signal.

0-2.5V to 4-20mA Signal Conversion

Convert a 0 to 2.5 volt range measurement input signal into a 4 to 20 milliamps loop output signal.

LMP307T Submersible Level and Temperature Transmitter

The LMP307T is a submersible level and temperature transmitter with a level sensing range from 1 to 250 mH2O and a temperature sensing range of 0 to 30°C up to 70°C.

Lightning protected submersible level sensor for hydroelectric intakes and rivers

Enhance hydroelectric monitoring reliability with the LMK858 sensor. Built-in lightning protection and robust design for remote water level measurement.

2m range 0.6% conc. chlorine liquid level sensor

Corrosion resistant liquid level sensor to measure up to 2m chlorine solution 0.6% conc.

What can a DP sensor be used to measure beyond differential pressure?

Differential pressure sensors offer functionality beyond their primary purpose. Explore the unexpected measurements and applications that these multi-purpose sensors can be adapted to support.

Measuring flow rate of a liquid or gas using a dp sensor

An introduction to the dp flow method of using a differential pressure sensor for measuring the flow of liquids and gases.

Measuring density of a liquid using a dp sensor

This guide provides an overview of methods for measuring liquid density using differential pressure sensors in various tank configurations and conditions.

Measuring liquid level in a tank using a dp sensor

Differential pressure sensors can be used to measure liquid level in a tank. Here we will explain how a DP sensor is used to measure liquid level.

Measuring vacuum as a negative gauge pressure using a dp sensor

Learn how a differential pressure sensor (dp sensor) can be used to measure a partial vacuum as a negative pressure relative to local surrounding air pressure.

Measuring vacuum as an absolute range using a dp sensor

Find out how to use a differential pressure sensor (dp sensor) to measure a partial vacuum as a positive pressure relative to full vacuum.

Measuring barometric pressure using a dp sensor

Learn the method to convert a differential pressure (DP) sensor for barometric pressure measurement.

Measuring absolute pressure using a dp sensor

Learn the method to convert a differential pressure (DP) sensor for absolute pressure measurement.

Measuring gauge pressure using a dp sensor

Differential pressure sensors can double as gauge pressure sensors. Here we will explain how a DP sensor is used to measure gauge pressure.

Cooking Measurements Converter

This tool helps convert cooking ingredient quantities and temperatures to various units, allowing for precise measurements as required by recipes. It supports weight (e.g., grams, ounces), volume (e.g., milliliters, pints), and temperature (e.g., Celsius, Fahrenheit) conversions, offering convenience and accuracy for culinary needs.

Everyday Measurements Converter

Quickly choose from 8 common measurands that we all use everyday, and convert measurements to different units for Length, Mass, Temperature, Time Period, Area, Volume, Pressure and Speed.

US/Imperial & Metric Units Converter

Convert between us / imperial and metric units for measurements of length, area, volume, speed, temperature, mass, force, and pressure.

Temperature Sensor Calculator

This multi-function tool can be easily adapted to calculate all the main parameters required by users when setting up, configuring and calibrating the different types of temperature sensors with added signal conditioning.

Mile Pace Calculator

This tool will help you calculate mile pace (min:sec/mi), from your time taken and distance completed during walking or running

Kilometre Pace Calculator

This tool will help you calculate kilometre pace (min:sec/km), from your time taken and distance completed during walking or running.

Stride Length Calculator

This tool will help you calculate your stride length from your distance and steps recorded during walking or running.

Steps Per Minute Calculator

This tool will help you calculate steps per minute, from the steps and time recorded after a fitness walk or run.

Intrinsically Safe Liquid Level Sensors

Explore intrinsically safe liquid level sensors designed for hazardous areas (ATEX/IECEx). Options for external tank mounting & submersible use with IP68 seals.

High Temperature Liquid Level Sensors

Explore high-temperature liquid level sensors featuring cooling elements and thermal isolation for reliable measurement in hot media, including fully submersible designs.

Low Pressure Calibrators

Explore low pressure calibrators featuring fine volume adjustment pumps and high-accuracy indicators for precise calibration in Pa, mbar, or “WC ranges. Ideal for sensitive instruments.

0-50Vac input to 0-10Vdc output converter

convert a 0-50Vac signal to a 0-10 volts dc signal

4-20mA Max. Load Resistance, Min. Tx and Power Supply Calculator

This tool will calculate the maximum load resistance, minimum power supply or transmitter supply that can be used, in order for a 4 to 20mA current loop circuit to have sufficient power to operate.

4-20mA Signal, Shunt Resistor and Volts Out Calculator

This tool will calculate the voltage drop created by adding a shunt resistor to a 4-20mA current loop signal circuit

Running or Walking Distance, Steps and Time Calculator

This multi-functional tool will help you calculate many personal fitness performance indicators including cadence, pace, speed and stride from your distance, steps and time recorded during walking or running.

Time Period Multi-Unit Converter

Use this tool to convert a period of time in one measurement unit to the equivalent in multiple units including years, months, weeks, days, hours, minutes, seconds, centiseconds (1/100th sec) and milliseconds.

Pressure Sensor Calibration Error Calculator

Use this tool to calculate the output error of a pressure sensor by entering the calibration reference pressure reading, pressure sensor range and measured output.

Pressure Sensor Output Calculator

This tool will calculate the expected output signal from a pressure sensor of a certain specified pressure range and applied pressure. It is also possible to reverse the function of the tool to calculate the applied pressure expected to produce a specific output reading.

Percentage Calculator

This tool will help you calculate percentage values using the various methods of changing a base value into a new one by a set percentage.

4 to 20 mA Supply, Load, Shunt and Signal Calculator

This 4-20mA current loop signal circuit tool will calculate all the electrical parameters associated with the power supply, load resistance, transmitter supply, shunt voltage drop and current signal.

Pressure Sensor Calculator

This multi-function tool can be easily adapted to calculate all the main parameters required by users when setting up, configuring and calibrating the different types of pressure sensors.

4 x 4-20mA Signal Wireless Repeater

Transmit four separate 4-20mA signals and repeat them from the receiver using four of the five available analogue outputs.

0-70mV to 4-20mA Signal Conversion

Convert a 0 to 70 millivolts range measurement input signal into a 4 to 20 milliamps loop output signal.

0-5V to 0-6.5V Signal Conversion

Convert a 0 to 5 volts range measurement input signal into a 0 to 6.5 volts output signal.

0-12V to 0-5V Signal Conversion

Convert a 0 to 12 volt range measurement input signal into a 0 to 5 volts output signal.

IW Series Industrial Wireless Measurement System

A complete wireless sensor and receiver system for use in industrial applications.

IWCTT Current Transformer mV ac Signal Input to Wireless Transmitter

Measure the millivolt alternating current output from any split core current transformer and wirelessly transmit it to a wireless receiver hub

IWDigT Switch or Pulse Input to Wireless Transmitter

Measure the open and closing of any voltage free contact switch or a pulses from a counter input, and wirelessly transmit it to a wireless receiver hub

IWVT 0-10Vdc Signal Input to Wireless Transmitter

Measure the signal from any 0 to 10 volt output measurement device, and wirelessly transmit it to a wireless receiver hub

IWmAT 4-20mA Signal Input to Wireless Transmitter

Measure the current loop signal output from any 4 to 20 milliamp transmitter, and wirelessly transmit it to a wireless receiver hub

IWTxT Loop Powered 4-20mA Input to Wireless Transmitter

Power and measure the current loop signal output from any 4 to 20 milliamp transmitter, and wirelessly transmit it to a wireless receiver hub

IWTRhT Wireless Ambient Temperature and Relative Humidity Sensor

Measure ambient temperature (Tamb) from -40 to +80 degrees Celsius and relative humidity (RH) from 0 to 100%, and wirelessly transmit them both to a wireless receiver hub

IWTaT Wireless Ambient Temperature Sensor

Measure ambient temperature from -40 to +80 degrees Celsius and transmit it wireless to a central wireless receiver

IWTT Wireless Battery Powered Temperature Sensor

Temperature sensing probe for wirelessly transmitting temperature readings from 3 wire PT100 platinum resistance thermometer, J or K type thermocouples.

IWR-5 Five Channel Wireless Sensor to 4-20mA or 1-5Vdc Output Signal Receiver

The IWR-5 is a five channel receiver designed to pair with IW series of wireless sensors and provide a 4-20mA or 1-5Vdc output signal

IWR-1 Single Channel Wireless Sensor to 4-20mA or 1-5Vdc Output Signal Receiver

The IWR-1 is a single channel receiver designed to pair with IW series of wireless sensors and provide a 4-20mA or 1-5Vdc output signal

IWR-PORT Wireless Sensors to Ethernet, RS232 or RS485 Gateway Receiver

The IWR-PORT Ethernet Gateway provides a link between wireless sensors and sensor networks and Industrial Ethernet or RS-232/485 networks.

IoT Gateway Wireless Sensors to 2G 3G 4G Modem Receiver

The IoT Gateway allows virtually any sensor to be monitored from anywhere with a Cellular connection.

IWR-USB Wireless Sensors to USB Gateway Receiver

The IWR-USB Gateway provides a link between wireless sensors and any PC with a USB connection

DCT531P RS485 Modbus RTU Flush Pressure Sensor

RS485 Modbus RTU serial interface pressure sensor with exposed all welded stainless steel 316L flush diaphragm in ranges from 100mb up to 40 bar gauge or absolute.

Cylinder and Sphere Dimensions with Same Volume Calculator

This tool will calculate the measurement of a selected dimension for one of the shapes, which is necessary to ensure a cylindrical and spherical shaped object have the same volume.

Box and Sphere Dimensions with Same Volume Calculator

This tool will calculate the measurement of a selected dimension for one of the shapes, which is necessary to ensure a rectangular box and a sphere have the same volume.

Two Cylinders Dimensions with Equal Volume Calculator

This tool will calculate the measurement of a selected dimension for one of the two cylinders, which is necessary to ensure both cylinders have the same volume.

Two Boxes Dimensions with Equal Volume Calculator

This tool will calculate the measurement of a selected dimension for one of the two boxes, which is necessary to ensure both boxes have the same volume. ⬜ = ▯

Box and Cylinder Dimensions with Same Volume Calculator

This tool will calculate the measurement of a selected dimension for one of the shapes, which is necessary to ensure a rectangular box and a cylinder have the same volume.

Push Pull Hydraulic Cylinder Pressure, Diameter and Force Calculator

This tool will calculate the pressure, bore diameter, rod diameter, push force and pull force parameters for a hydraulic cylinder used to cause movement by extending and retracting a rod connected to a mechanical component.

Pressure Transmitter 0-20mA Current Output Calculator

This pressure transmitter 0 to 20 milliamp current output calculator provides a way to determine the output reading from the applied pressure and pressure transmitter range.

Two Connected Hydraulic Cylinders Force, Diameter and Displacement Calculator

This tool will calculate force, diameter and displacement parameters for two hydraulic piston cylinders of different diameters connected together.

Fluid Depth, Density, Gravity, and Pressure Calculator

This tool will calculate any of parameters defined by the hydrostatic pressure formula P=ρgh which includes depth, density, gravity and pressure.

Elevation, Station (QFE) and Sea Level (QNH) Pressure Calculator

This tool which is based on the icao standard atmosphere model will calculate the station elevation relative to sea level, station pressure or the sea level pressure used for QFE or QNH setting altimeters.

ICAO Standard Atmosphere Altitude and Pressure Calculator

This tool which is based on the icao standard atmosphere model will calculate the air pressure at a height above or below sea level, the altitude from the atmospheric air pressure at the same level, the pressure difference between two altitudes, and the altitude difference between two atmospheric pressures.

US Standard Atmosphere Altitude and Pressure Calculator

This tool which is based on the us standard atmosphere model will calculate the air pressure at a height above or below sea level, the altitude from the atmospheric air pressure at the same level, the pressure difference between two altitudes, and the altitude difference between two atmospheric pressures.