Convert a 0 to 10 volts range measurement input signal into a square root extraction 0 to 10 volts output signal.

## Products

### ISOCON 0-10V to SqRt 0-10V Signal Converter

The ISOCON isolating signal converter is used to convert a 0-10V input measurement signal to a SqRt extraction 0-10V output signal. The ISOCON can be easily mounted to a wall using a TS35 DIN rail.

#### ISOCON-6 24V ac/dc Powered 0-10V to SqRt 0-10V Signal Converter

- SKU ID: s1-isocon-0155
- Part No: II-ISOCON-6-G000-G-001
- Input Type: 0-10V
- Output Type: SqRt 0-10V
- Supply: 12-36 Vdc or 12-32Vac
- Isolation: Full 3-Port
- Installation: DIN Rail TS35
- Electrical Connections: Screw clamp with pressure plate

#### ISOCON-3 Mains Powered 0-10V to SqRt 0-10V Signal Converter

- SKU ID: s1-isocon-0156
- Part No: II-ISOCON-3-G000-G-001
- Input Type: 0-10V
- Output Type: SqRt 0-10V
- Supply: 85-260Vac
- Isolation: Full 3-Port
- Installation: DIN Rail TS35
- Electrical Connections: Screw clamp with pressure plate

## Conversion Tool and Table

Calculate or look up a 0 to 10 V input scale value, to find the equivalent value over the sqrt extraction 0 to 10 V output scale.

Enter input value in V for a linear range from 0 to 10 V to calculate output value in V for a square root range from 0 to 10 V.

Request product info for a 0...10 V linear input range to 0...10 V square root output scale measurement device.

Pick a value from the 0 to 10 V linear input range column of the conversion table below, and find the corresponding value in the 0 to 10 V square root output range column.

0...10 V | 0...10 V | 🔗 |
---|