Convert a 4 to 20 milliamps range measurement input signal into a square root extraction 4 to 20 milliamps output signal.

## Products

### ISOCON 4-20mA to SqRt 4-20mA Signal Converter

The ISOCON isolating signal converter is used to convert a 4-20mA current loop input measurement signal to a SqRt extraction 4-20mA current output signal. The ISOCON can be easily mounted to a wall using a TS35 DIN rail.

#### ISOCON-6 24V ac/dc Powered 4-20mA to SqRt 4-20mA Signal Converter

- SKU ID: s1-isocon-0147
- Part No: II-ISOCON-6-A000-A-001
- Input Type: 4-20mA
- Output Type: SqRt 4-20mA
- Supply: 12-36 Vdc or 12-32Vac
- Isolation: Full 3-Port
- Installation: DIN Rail TS35
- Electrical Connections: Screw clamp with pressure plate

#### ISOCON-3 Mains Powered 4-20mA to SqRt 0-20mA Signal Converter

- SKU ID: s1-isocon-0148
- Part No: II-ISOCON-3-A000-A-001
- Input Type: 4-20mA
- Output Type: SqRt 4-20mA
- Supply: 85-260Vac
- Isolation: Full 3-Port
- Installation: DIN Rail TS35
- Electrical Connections: Screw clamp with pressure plate

## Conversion Tool and Table

Calculate or look up a 4 to 20 mA input scale value, to find the equivalent value over the sqrt extraction 4 to 20 mA current output scale.

Enter input value in mA for a linear range from 4 to 20 mA to calculate output value in mA for a square root range from 4 to 20 mA.

Request product info for a 4...20 mA linear input range to 4...20 mA square root output scale measurement device.

Pick a value from the 4 to 20 mA linear input range column of the conversion table below, and find the corresponding value in the 4 to 20 mA square root output range column.

4...20 mA | 4...20 mA | 🔗 |
---|