Convert a 4 to 20 milliamps range measurement input signal into a 0 to 20 milliamps output signal.
Products
ISOCON 4-20mA to 0-20mA Signal Converter
The ISOCON isolating signal converter is used to convert a 4-20mA current loop input measurement signal to a 0-20mA current output signal. The ISOCON can be easily mounted to a wall using a TS35 DIN rail.
ISOCON-6 24V ac/dc Powered 4-20mA to 0-20mA Signal Converter
- SKU ID: s1-isocon-0009
- Part No: II-ISOCON-6-A000-B-000
- Input Type: 4-20mA
- Output Type: 0-20mA
- Supply: 12-36 Vdc or 12-32Vac
- Isolation: Full 3-Port
- Installation: DIN Rail TS35
- Electrical Connections: Screw clamp with pressure plate
ISOCON-3 Mains Powered 4-20mA to 0-20mA Signal Converter
- SKU ID: s1-isocon-0010
- Part No: II-ISOCON-3-A000-B-000
- Input Type: 4-20mA
- Output Type: 0-20mA
- Supply: 85-260Vac
- Isolation: Full 3-Port
- Installation: DIN Rail TS35
- Electrical Connections: Screw clamp with pressure plate
Conversion Tool and Table
Calculate or look up a 4 to 20 mA input scale value, to find the equivalent value over the 0 to 20 mA current output scale.
Enter input value in mA for a linear range from 4 to 20 mA to calculate output value in mA for a linear range from 0 to 20 mA.
Request product info for a 4...20 mA linear input range to 0...20 mA linear output scale measurement device.
Pick a value from the 4 to 20 mA linear input range column of the conversion table below, and find the corresponding value in the 0 to 20 mA linear output range column.
4...20 mA | 0...20 mA | 🔗 |
---|