Invert a 0 to 20 milliamp current range measurement input signal into a 20 to 0 milliamp current output signal.
Products
ISOCON 0-20mA to 20-0mA Inverted Signal Inverter
The ISOCON isolating signal inverter is used to invert a 0-20mA current input measurement signal to a 20-0mA current output signal. The ISOCON can be easily mounted to a wall using a TS35 DIN rail.
ISOCON-6 24V ac/dc Powered 0-20mA to 20-0mA Signal Inverter
- SKU ID: s1-isocon-0060
- Part No: II-ISOCON-6-B000-J-000
- Input Type: 0-20mA
- Output Type: 20-0mA
- Supply: 12-36 Vdc or 12-32Vac
- Isolation: Full 3-Port
- Installation: DIN Rail TS35
- Electrical Connections: Screw clamp with pressure plate
ISOCON-3 Mains Powered 0-20mA to 20-0mA Signal Inverter
- SKU ID: s1-isocon-0061
- Part No: II-ISOCON-3-B000-J-000
- Input Type: 0-20mA
- Output Type: 20-0mA
- Supply: 85-260Vac
- Isolation: Full 3-Port
- Installation: DIN Rail TS35
- Electrical Connections: Screw clamp with pressure plate
Conversion Tool and Table
Calculate or look up a 0 to 20mA input scale value, to find the inverted value over the 20 to 0 mA output scale.
Enter input value in mA for a linear range from 0 to 20 mA to calculate output value in mA for a linear range from 20 to 0 mA.
Request product info for a 0...20 mA linear input range to 20...0 mA linear output scale measurement device.
Pick a value from the 0 to 20 mA linear input range column of the conversion table below, and find the corresponding value in the 20 to 0 mA linear output range column.
| 0...20 mA | 20...0 mA | 🔗 |
|---|