The SWL is a a IP68 pressure sensor which is made from Marine bronze for compatibility with sea-water.
Signal 4-20mA
Sea-water corrosion resistant 10 bar pressure transmitter
We have a pressure transmitter that needs to be replaced which has completely corroded after being used on sea-water.
Flood proof, vacuum pressure transmitter for use on fuel tank system
What to use for measuring vacuum pressure on a fuel tank in a hazardous area which is prone to flooding?
40 foot high diesel tank submersible pressure sensor
What submersible pressure sensor would you suggest to measure a 40′ deep diesel storage tank?
35X HTC High Temperature Digital Pressure Sensor (< 300 degC)
The 35X HTC high temperature digital pressure sensor is suited for media temperatures up to 300 °C
40 mbar negative gauge vacuum transmitter for pump VSD control
DMP343 is a capable of measuring a 40 millibar negative pressure with a 4-20mA scaling over 0 to -40 mbar.
Hastelloy diaphragm -100 to 50 kPa g range manometer
Small manometer device with membrane protected against corrosive material (chemicals) and which we would prefer to be covered with Hastelloy steel.
Diaphragm sealed high temperature pressure transmitter for -1 to 25 kg/cm²
Diaphragm sealed pressure transmitter for measuring over -1 to 25 kg/cm² on liquid with a flush type diaphragm up to a temperature of 190°C.
Compound vacuum and pressure HART transmitter for +/- 500 mmWG
Compound vacuum and pressure transmitter with HART compliant 4-20mA analog output and insertion type, bottom mounted, 1/2 NPT male process connection
Water reclamation system 6 bar range pressure transmitter for marine use
Marine certified pressure transmitter for use in water reclamation system with a flush diaphragm to discourage build up of solids on the diaphragm face.
10,000 mmH2O range 19mm dia borehole water level sensor
19mm diameter bore hole submersible water sensor designed to measure 0-10000 mmH2O raw water level with a 4-20mA output.
Compound +/-200 mb g pressure transmitter with 1/2 BSPT
Stick type pressure transmitter ranged -200mbarg to +200mbarg with a 4-20mA output.
IMSTL IP68 Water Temperature and Depth Transmitter
Stainless steel 316L waterproof probe for measuring both water temperature and depth and generating two separate 4-20mA current loop measurement signals.
DS201 Combined Pressure Sensor, Display and Switch
Ceramic diaphragm diaphragm based pressure sensor, indicator & electronic switch with pressure ranges from 0-0.4 bar up to 0-600 bar.
IMCL Low Cost Submersible Pressure Sensor
Economical IP68 protected sensor with stainless steel 316L housing and Ceramic strain gauge sensing diaphragm for measuring liquid depth pressure.
DS200 Combined Pressure Switch, Gauge and Sensor
Three in one electronic pressure switch, digital pressure gauge and pressure sensor with pressure ranges from 100 mbar up to 600 bar (1.5 to 9000 psi).
IWSL Potable Water Submersible Level Sensor
IP68 protect pressure sensor for monitoring potable water level to depths of 100 metres.
DMP304 Ultra High Range Hydraulic Pressure Transducer
Current output pressure transducer for measurement ranges from 0 to 2000 (30000 psi) range up to a maximum range of 6000 bar (90000 psi).
DMD341 Compact Differential Air Pressure Sensor
Small size dp sensor for measuring differential air pressure on HVAC, compress air and pneumatic control systems.
DMP331 Precision Pressure Transmitter
Stainless steel pressure transmitter with ranges from 100mbar up to 40 bar gauge or absolute. Special options for ATEX , SIL2 and compound ranges.
DMP334 Hydraulic Pressure Transducer for Very High Pressures
DMP 334 is a high range pressure transducer designed for measuring hydraulic pressures up to 2200 bar (32,000 psi) .
DMP333 High Range Precision Pressure Transmitter
The DMP 333 is a stainless steel 316L wetted parts pressure sensor for high pressure ranges on applications such as hydraulic test benches, presses, and hydraulic actuation.
ATM/T Pressure and Temperature Dual Output Transmitter
Dual analogue output signal transmitter for simultaneous measurement of media pressure and temperature. Pressure 100mb – 1000bar and temp -25 – 100 DegC.
LMK307 Submersible Waste Water Level Sensor
Submersible waste water level sensor with optional intrinsic safety certification for monitoring the level of sewage and effluent in water treatment plants.
DMK331P Flush Diaphragm Pressure Sensor
Screw-in pressure transmitter with flush stainless steel 316L diaphragm for measuring pressures of fluids with very high viscosity from 900 up to 6000 psi
LMK351 High Overpressure Flush Level Transmitter
Flush capacitive ceramic pressure sensor for measuring corrosive and viscous liquid level from levels 0.4 metres of water up to 200 mH2O.
IMP Low Cost Pressure Sensor
Versatile low price pressure sensor with a wide selection of electrical and mechanical options for customisation.
LMK331 Screw-In Ceramic Level Transmitter
Level pressure sensor with semi-flush ceramic diaphragm and stainless steel or PVDF wetted parts in ranges from 0-4 to 600mH2O gauge.
DMP331P Hygienic Flush Pressure Transmitter
Sanitary pressure sensor wth exposed diaphragm with no crevices for high temperatures up to 300 Degrees Celsius in ranges from 100mb up to 40 bar gauge or absolute
TPSA Precision High Pressure Transducer
High pressure transducer for pressure testing applications with pressure ranges from 0…4 bar (60 psi) up to 0…1000 bar (15,000 psi) gauge with a measurement accuracy of 0.1%.
DPS Low Differential Pressure Transmitter
Ultra low differential pressure transmitter for HVAC applications with 4-20mA current loop or amplified voltage output signal in pressure ranges from 0.1 mb up to 1 bar differential.
DMP331i High Accuracy Pressure Transmitter
High precision pressure transmitter with an accuracy of 0.1%FS BSL NLHR and digitally adjustable pressure ranges from 400mb up to 40 bar gauge & absolute.
IMPLR Low Range All Stainless Steel OEM Pressure Sensor
Low cost sensor for measuring small pressure ranges from 0-50 mbar (10 inH2O) to 0-1000 mbar (15 psi) of liquids or gases.
MTM/N10 10mm Diameter Submersible Miniature Pressure Transducer
MTM3000 Miniature Level Sensor specially designed for inserting down very small boreholes in wells, dams and many geophysical research applications.
HART®
HART® or Highway Addressable Remote Transducer is a type of digital communications protocol for configuring and reading instrumentation via 4-20mA signal.
Square Root Extraction
Square Root Extraction is a mathematical process which is applied to a linear measurement scale to convert it to a non-linear square root scale.
Transmitter
Transmitter (Tx) is a device which converts a sensor output into an analogue signal suitable for sending over long distances without significant signal loss or interference. A common type of sensor transmitter signal is a 4 to 20 milliamp current loop output.
Turndown Ratio
Turndown Ratio describes the difference between the highest and lowest possible span of measurement output which can be set for a sensing device with a rangeable output signal such as 4 to 20mA output which is HART enabled.
2 Wire
2 wire is used to distinguish electrical connections for measurement signals which use only two connections for carrying both the power supply and signal.
4 to 20 mA Current Loop Output Signal
4-20mA Current loop output is a type of electrical signal that is used in a series circuit to provide a robust measurement signal.
Isolation Diaphragm
An Isolation diaphragm is a thin membrane which is used to isolate the media on one side of a diaphragm from media on the other side.
Low cost barometric pressure transmitter for 750 – 1250 mbar absolute
Low cost pressure transmitter for measuring barometric pressure from 750 to 1250 millibar absolute.
Low cost hydrostatic sensor for measuring depth of Diesel up to 2 metres
The IMTG is specifically designed for large quantity OEM customers which manufacture and install content management systems for fuel storage tanks.
Hot oil pressure transmitter & display to read up to 5 bar at 300degC max
Pressure transmitter with an integral LED loop powered digital display for use with hot oil up to 300 deg. C (max.) over a pressure range of 0-5 bar gauge.
3 kg/cm2 sea water pressure transmitter
Pressure transmitter for sea water with pressure range of 0 – 3 kg/cm², CuNi10Fe1Mn body material, and ceramic diaphragm sensing material
Dockside sea water tide level transmitter up to 6 metres depth
Pressure transmitter for measuring depth of tide in a dock from 0 to 6 metres of seawater.
Marine and IS approved, -1 to 3 mWG compound range pressure transmitter
Pressure transmitter with Marine type approvals and a compound pressure range of -1000 to +3000 mWG.
Low cost, upstream/downstream, 5m range, fresh-water, weir level sensor
Sensor for measuring the difference in depth upstream and downstream of a freshwater weir with a maximum depth of 5 meters.
Replacement alternative to Ashdown Control DNX pressure transmitter with 40kPa and 60kPa range
I need to replace 2 Ashdown Control pressure transmitters in an existing system.
Water reservoir rangeable submersible depth transmitter
Rangeable submersible depth transmitter with a digital interface for re-ranging to any depth down to 10 m max.
HART flameproof (Ex d) re-scalable level transmitter for hydrostatic head up to 2 metres
HART compatible, ATEX flameproof approved, rangeable level transmitter to measure hydrostatic head of water/glycol or mineral oil fluid within a reservoir about 2 metres in height.
Ex rated ambient pressure sensor with 800-1100 mbar range
Could you give details of a high accuracy pressure sensor which measures ambient pressure (800 to 1100 mb) for environmental purposes.
Air Replacement Plant (ARP) 100 mm H2O differential pressure transmitter
Differential pressure transmitters for instant monitoring of the air flow going through the painting booth interior
270 degC steam pressure sensor with a 60 bar range
My application is on steam pressures up to 60 bar, and I plan to mount a pressure sensor onto a containing wall at a temperature of about 270degC
Seawater pressure transmitter with 10 bar range and marine certification
Seawater pressure transmitter with following specs, 0-10 bar g, 4-20mA output, 1/2″ connection, seawater resistant and marine certified.
DMK 331 Ceramic Diaphragm Industrial Pressure Transmitter
This pressure transmitter can be supplied with a PVDF process connector so that it can be used to measure the pressure of acids and other corrosive chemicals.
Submersible rainwater tank level sensor for measuring 3.5m depth
Low budget price rainwater level sensor with 3.5 metres maximum water depth (0.35 bar), 4-20mA output, 15 volt supply, and typical 0.5% accuracy
Plenum chamber differential pressure transmitter with 100 mmWG range
Differential pressure transmitter for measuring fan plenum chamber air pressure with a 0 to 100 mm of water column range
Ranges below 60 bar no longer available for DMK331P
In the past we have purchased the DMK331P 505-1002-1-5-100-Z00-1-1-1-150, but we are now told that this part number is no longer available.
Water temperature depth sensor for cooling tower sump
I would like to drop a sensor into a stilling chamber and measure the water depth along with the water temperature if possible.
River level sensor for run-of-the-river hydropower monitoring up to 4m
Vented pressure river level sensor for measuring water level up to 0.4 bar in run-of-the-river hydroelectricity systems.
0 to -2000 Pa vacuum transmitter
Pressure transmitter with a 0 to minus 2000 pascal pressure range and 2 wire 4 to 20 mA output signal. DMP343 Low Range Pressure Sensor Pressure Range: 0 to minus 20 mbar (-2000 Pa) gauge Output Signal: 4-20mA (2 wire) Electrical Connection: DIN43650A plug IP65 Pressure Connection: G1/2 DIN 3852 male
Chlorine dioxide (ClO2) resistant 20 bar pressure sensor
Pressure sensor resistant to low levels of Chlorine dioxide (<100mg/L) up to 20 bar.
Swimming pool submersible pressure transmitter with 300 mbar range
Submersible pressure transmitter for use in swimming pools with a range of 0mbar to 300mbar.
Dust ATEX approved 2 psi pressure transmitter
Pressure transmitter with a 0-2 psi range and a 4-20mA output signal for use in a zone 20 hazardous dust environment.
Lube oil pressure sensor for use on ship engines to measure up to 10 bar
Marine approved pressure sensor for use on lube oil up to 10 bar with a maximum media temperature of 120°C and environment temperature from 0 to 70°C.
Marine certified oil pressure sensor with 2.5 bar g range
Marine approved version pressure sensor for use on Diesel up to 2.5 bar at a maximum media temperature of 120°C and environment temperature of 70°C.
Minus 0.25 inWG differential pressure transmitter for negative air pressure difference
Pressure transmitter which will measure o to -0.25 inches of water differential air pressure and output a linear signal over a current scale of 4 to 20 milliamps.
Submersible 50 meter potable water depth transmitter
2 wire 4-20mA submersible pressure transmitter for use in potable water for measuring depth from 0 to 50 meters with a 60 meter length of vented cable.
Water level transmitter for monitoring sump pit water depth
Low range water depth sensor with a 4-20mA output, for connecting to a PLC to control a sump pump and submerging into a pit to monitor the level
Air scrubber 10 inH2O partial vacuum pressure transmitter
Negative air pressure transmitter with a loop powered 4-20mA signal to monitor vacuum in an air scrubber system down to minus 10 inH2o compared to atmosphere.
60 metre deep borehole pump water level and temperature sensor
Combined submersible pressure sensor and temperature sensor for sitting beside a submersible pump at 60 metres depth.
HART coms compatible vacuum transmitter for -1 to 0 bar g
HART enabled 4-20mA vacuum transmitter to monitor over the range of -1 to 0 bar with a 1/2″ BSP thread process connector.
100 Pa bi-directional range differential air pressure transmitter
Bi-directional low range 4 to 20 milliamp differential pressure transmitter covering an air pressure range from -100 to +100 pascals.
Flush mountable vacuum transmitter
Vacuum transmitter with flush mount thread connection for monitoring 0 to -1 bar full vacuum.
Compound +/-2.5 mbar DP transmitter, indicator & alarm switch
Differential pressure transmitter with a signal & alarm warning output for measuring a compound scale from a vacuum of -2.5mbar to a pressure of 2.5mbar.
SIL 2 certified 800 to 1200 mbar abs range air pressure transmitter
Atmospheric air pressure transmitter with SIL 2 certificate for measuring surrounding air pressure from 0.8 to 1.2 bar absolute.
10 bar g steam pressure transmitter and indicator
Steam pressure transmitter with LED display indicator for measuring 0 to 10 bars with in-built temperature reducer
100 barg pressure transmitter with 3.1b material, atex and cal cert
4-20mA current output pressure transducer for 0-100 bar g pressure range with material certification to 3.1 standard, atex haz. area certification and calibration certification.
-10 to +5 psi compound range fresh water pressure sensor
Compound range pressure sensor with a negative pressure range of 0 to minus 10 psi g and a positive pressure range of 0 to plus 5 psi g.
R22 and R410A refrigerant compatible 400 psi g pressure transmitter
All welded OEM pressure transmitter for use on refrigeration application with R22 and R410A refrigerant up to 400 psig.
320 degF steam temperature, 100 psi pressure transmitter
Pressure transmitter for measuring steam pressures up to 100 psi and to a temperature of 320F (160C).
-760mmHg to +20 kg/cm² pressure transmitter with HART coms
Compound range transmitter for sensing pressure from -760 mm of mercury vacuum to 20 kilograms per sq cm positive pressure with HART communication.
100 kg per square cm range HART pressure transmitter
Transmitter for measuring pressure with a range scaled from 0 to 100 kg/cm² range, configurable and adjustable via HART communication.
Minus 100 pascal suction pressure transmitter
Very low range suction pressure transmitter for monitoring negative pressures up to 100 pascals.
High temperature air pressure transmitter with 0.5 mH2O range
Pressure transmitter for measuring pressures up to 0.5 metres of water column of hot air at a maximum temperature of 300 degrees Celsius.
50 mbar ATEX approved air duct pressure sensor
Atex rated pressure sensor for measuring up to 50 mbar in a round air duct installed in a potentially flammable area.
30000 psi water and cutting oil pressure transmitter
High pressure transmitter for use in hydraulic circuit to measure a composition of water mixed with cutting oil. This sensor is zero & span adjustable via external potentiometers.
200 mbar diesel fuel oil tank level sensor for internal installation
Fuel oil pressure sensor with a 4-20mA current output and a submersible electrical connection for lowering inside a Diesel fuel storage tank to measure hydrostatic level of fuel oil up to 200 millbar.
SIL2 approved 10 bar pressure transducer with 4 to 20 mA output
Pressure transducer with SIL 2 approved electronics that provide a 4-20mA output over a 0-10bar working range.
Dairy compatible 90 kPa vacuum pressure transmitter
Suction pressure sensor for dairy milking machine equipment with hygienic tri clamp connection for measuring 0 to minus 90 kilopascals vacuum pressure.
10,000 psi hydraulic pressure transmitter and panel readout
Pressure transmitter and remote readout for measuring hydraulic fluid from 0-10,000psi.
0.2 bar tank level pressure sensor for fuel oil up to 2m deep
Submersible pressure sensor with 0 – 0.2 bar range for measuring the level of a 2 metre deep fuel oil storage tank.
-1 to 10 bar ATEX pressure sensor
Compound range ATEX pressure sensor for measuring -1 to +10 bar gauge in a hazardous zone.
Dredging vacuum pressure Transmitter
Vacuum pressure sensor that will measure the vacuum pressure of a dredger suction pipe pump inlet.
SqRt Extraction 4-20mA Signal to Measurement Reading Converter
This tool will convert a sqrt 4-20 milliamp signal to a linear measurement over a specified measurement range and show a related conversion scale.
Measurement Reading to SqRt Extraction 4-20mA Signal Converter
This converter will convert any reading to a sq rt extraction 4-20mA signal. A sqrt 4-20mA conversion scale is also displayed for each measurement range.
40 mbar range pressure to current transmitter
Pressure to current transmitter which can be powered from a 15-24vdc and output a 4-20 mA over a pressure range of 0-40 mbar gauge.
Combined readout and transmitter for measuring up to 250 bar Methane gas
Local display mounted on a sensor with a two wire 4 to 20mA signal running out to measure the pressure of a 250 bar methane gas supply line.
Measurement Reading to 4-20mA Signal Converter
This tool converts linear measurement readings into a 4-20mA signal and displays a 4-20mA conversion scale for the corresponding measurement range.