• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
SensorsONE

SensorsONE

  • Products
  • Contact

kPa to bar Conversion Table

The formula for converting kilopascal into bar pressure units is calculated as follows:

  • 1 bar = 100,000 Pascals (Pa)
  • 1 kPa = 1,000 Pascals (Pa)
  • bar value x 100,000 = kPa value x 1,000
  • bar value = kPa value / 100

0 to 200 kPa to bar Conversion

Featured kPa pressure unit scaled products

  • Pass/Fail timed 500 kPa pressure leak test software and sensor
  • -10…30 kPa g compound range inert gas pressure transmitter for ship IG system
  • Air classification system powder duct pressure transmitter with +/-15 kPa range and ATEX/IECEx IS cert
  • 500 kPa g range rupture disk blowing digital display pressure gauge and logger

Enter a pressure in kPa below to convert it to the equivalent pressure in bar.

From kPa
To bar
Sorry, a graphic could not be displayed here, because your browser does not support HTML5 Canvas.

Featured bar pressure unit scaled products

  • SIL2 approved 10 bar pressure transducer with 4 to 20 mA output
  • Dirty water, sludge & sewerage tank level 400 mbar pressure sensor
  • 100 bar pressure logging system with 10hz sampling rate and digital readout
  • Hydraulic puller-tensioner bar pressure to kilonewton load HMI display & logger

Choose a value between 0 and 200 kPa from the pressure conversion table below, to obtain the converted value in bar.

kPa bar 🔗

0 to 1,000 kPa to bar Conversion

Featured kPa pressure unit scaled products

  • Pass/Fail timed 500 kPa pressure leak test software and sensor
  • -10…30 kPa g compound range inert gas pressure transmitter for ship IG system
  • Air classification system powder duct pressure transmitter with +/-15 kPa range and ATEX/IECEx IS cert
  • 500 kPa g range rupture disk blowing digital display pressure gauge and logger

Enter a pressure in kPa below to convert it to the equivalent pressure in bar.

From kPa
To bar
Sorry, a graphic could not be displayed here, because your browser does not support HTML5 Canvas.

Featured bar pressure unit scaled products

  • SIL2 approved 10 bar pressure transducer with 4 to 20 mA output
  • Dirty water, sludge & sewerage tank level 400 mbar pressure sensor
  • 100 bar pressure logging system with 10hz sampling rate and digital readout
  • Hydraulic puller-tensioner bar pressure to kilonewton load HMI display & logger

Choose a value between 0 and 1000 kPa from the pressure conversion table below, to obtain the converted value in bar.

kPa bar 🔗

Primary Sidebar

Wirelessly Measure & Log Pressure

Use this battery powered wireless pressure sensor to transmit readings to a receiver connected to USB, RS485, RS232, cellular network or analog output

Use this battery powered wireless pressure sensor to transmit readings to a receiver connected to USB, RS485, RS232, cellular network or analog output

Email Your Enquiry

enquiries@sensorsone.com
By clicking "OK" or continuing to use this website you are providing your consent to use cookies as described in our Privacy Policy

© 2025 SensorsONE Ltd, all rights reserved

  • Home
  • Products
  • Tools
  • Legal
  • Contact