The XSYS-0011 is supplied as a portable transport case with a CMC Multicon colour touchscreen data logger plus an optional MLP-149 portable printer integrated .
Visual barometric pressure indicator and pressure sensor with opening and closing alarm relay switches for use in conjunction with safety shut down circuits for wind power installations.
Multichannel display, controller and email notifier with submersible or external mounted 4m range water level sensor
We are looking for an indicator with HMI software to show a machine operator the amount of force generated by a hydraulic puller-tensioner used for power line stringing.
A complete clean room measurement system for 4 separate rooms, each with its own room pressure, humidity and air temperature indicator, and a central monitoring unit for clean room corridor or control room.
A digital display, pressure sensor and digital interface module package for use on portable data acquisition trolleys to measure pressure of air over a range of -20 to 20 kPa diff from two 6.6mm dia x 11mm barbed hose connections, and sending the corresponding reading via a RS485 Modbus RTU interface through the terminal block connector electrical connections.
8 channel analogue signal to digital interface module for converting voltage or current signal inputs to a single RS-485 communication interface using Modbus RTU transmission protocol.
This submersible pressure transducer and display can be used by landfill site pump techs to read leachate water level above the transducer at the well head.
I am looking for a temperature/pressure sensor or transmitter and digital readout. Pressure range required is 0-60psi and the temperature range required is 0-80C.
The ProSens environmental monitor and controller is an industrial interface instrument which integrates a transmitter, display, meter and controller functions in one box.
We need a system to monitor overpressure, temperature and humidity for a new cleanroom that we will be extending.
We need to measure the level of liquid in a pressurised tank. We have a pressure sensor at the top of the tank and one at the bottom.
We need a suitable gauge to use as a leak testing test set we are looking to build. We need to measure down to -10 mbar and monitor for 1 minute to ensure the leak rate is not greater than 1 mbar/minute.
Recording pressures up to 10,000 psi on a hydraulic press with a fast logging rate.
Hygienic liquid level sensor and wall mounted digital display unit for measuring contents of a dairy silo in litres.
We work with hydraulic propping equipment used in excavation support and we are looking into pressure testing and monitoring with a network of pressure instruments.
I need to visualise and record the parameters for one hydraulic piston. The piston will have a maximum working pressure of 350 bars, and I need to monitor the pressure in both directions.
We carry out resource tests on water wells. For the tests we need to record the speed at which the water drops within a borehole at a certain flow rate.
Wall mounted instrument for monitoring & controlling the climate in a room including room pressure, humidity and temperature sensor.
Vacuum suction sensor that can provide a digital readout and a switched contact when the pressure gets too high
Pressure sensor & instrument to measure and data log the pressure inside an oven during some heating tests.
Indicator & controller products designed and manufactured by Simex for the automation, process control, machine building, system integration, and measurement & control industries.
sensor which can installed down a tube to measure seawater level in a harbour in order to switch a pump on when the tide comes in
2 hydraulic oil pressure transducers and an indicator to measure both sides of a 700 bar hydraulic cylinder.
sensor and panel mount digital indicator for measuring the overload pressure in a mechanical press
The SWL is a a IP68 pressure sensor which is made from Marine bronze for compatibility with sea-water.
Logger with low bidirectional range differential sensor for recording brick kiln and dryer air pressures over the compound range of -100 to +100 Pa.
Portable seawater level logger instrumentation kit for measuring, displaying and logging sea water levels to a maximum depth of 10 metres.
We are looking to establish negative room pressure inside each of five interior zones to eliminate the spread of dust. The rooms will be sealed and each one will have an air scrubber vented to an adjacent room. We will need to monitor the pressure difference inside and outside the protected area to ensure a […]
High pressure indicator, logger and pressure sensor to measure between 0 and 50,000 psi (~3500 bar) for hose burst tests. The MultiCon CMC99 comes with a memory stick with which allows the transfer of pressure/time data files from the MultiCon CMC99. Once the data is transferred to the PC, the DAQ PC software will allow you […]
Submersible temperature sensor for submersing in sea water down to a maximum depth of 100 metres complete with a local display for monitoring the temperature from the surface.
Pressure transmitter and remote readout for measuring hydraulic fluid from 0-10,000psi.
PC data acquisition and recording system to a maximum range of 30,000 psi.
Water level indicator for a 2 metre deep rain water storage tank located underground.
Hydrostatic principle level sensor and indicator for overcoming frothing problem on the surface of a rolling oil liquid inside a storage tank.
Transducer and data logger capable of recording pressure over time for a system which has a max pressure of 40000 psi.
Panel mounted 24 volts powered display gauge and high range pressure transducer for measuring up to 24,000 psi.
4-20mA pressure transducer and manual digital readout with logging facility to enable pressure tests up to 100 bar to be logged with respect to time at a sample rate of 10 Hz.
Sensor and panel indicator to monitor a pressure drop through a casting of up to 10 kilopascals.
Wet wet differential pressure sensor and digital panel indicator for measuring fresh water pressure from 0 to 150 psi.
We are looking for a way of logging utility service pressures up to 10bar in different locations around our factory.
I’m looking for a sensor and panel indicator for a pressure test rig to measure up to 30,000 psi.
I am looking for a pressure indicator for mounting into a test bench panel to measure up to 60000 psi.
We are looking for a data acquisition and recording system with 1600 bar rated pressure sensors
I am looking to measure the pressure difference across a water cooler with a maximum diff pressure of 2 bar
I need a hydraulic transducer that measures pressure up to 3000 psi pressure units with a separate digital read out that can be located away from the transducer.
We are looking for a digital pressure indicator for use with high temperature gas to a maximum temperature of 270 degC
An easy to install wall mounted digital display for use in high humidity or outdoor environments.
Four digit reading digital indicator for monitoring the signal from mA, volts or mV output sensors with settable alarms for switching fans, pumps or valves.
Multifunctional digital controller & datalogger for processing the signal from an extensive range of sensors for the purpose of controlling a process or recording data.