I need to visualise and record the parameters for one hydraulic piston. The piston will have a maximum working pressure of 350 bars, and I need to monitor the pressure in both directions. So I need two pressure transmitters (transducers ), and one display, to view and record the data. The recorded parameters should be in daNm units.
We would suggest using the MultiCon CMC-N16 display & datalogger with two TPSA high pressure transmitters. This will display all the results for you, perform the maths, scaling and linearisation etc… to convert the pressure readings into a force or torque measurement for the hydraulic piston.
MultiCon Multichannel Display & Datalogger
- Part No: CMC-N16-PS4/E/E/E/E-0B1
- MultiCon Type: CMC-N16 wall mount, 3.5 inch display, 4 inputs max
- Power Supply (Slot P): 85-260V AC/DC (PS4)
- Digital Coms (Slot D): No Port (E)
- Inputs / Outputs (Slot C): empty (E)
- Inputs / Outputs (Slot B): empty (E)
- Inputs / Outputs (Slot A): empty (E)
- Options: front USB Host (0B1)
TPSA High Pressure Transmitter
- Part No: TPSA-E-1-E-B35D-T-V-2130-X000A00
- Pressure Range: 350
- Units: bar
- Range Type: Positive Gauge (atm to +P)
- Output Signal: 4-20mA
- Electrical Connection: DIN43650A standard plug IP65
- Optional Mating Connector: DIN43650A standard IP65
- Process Connection: G1/4 male (DIN3852-A)