I am looking for a temperature/pressure sensor and digital readout. We will be using this to monitor oil temperatures and pressures of gearboxes during our testing, however we only have 1 measurement port which is 1/4″ BSP. Ideally we would like to mount a single readout in our motor control cabinet. Pressure range required is 0-60psi and the temperature range required is 0-80C.
We would suggest the ATM/T connected to a ProSens QM-100 display for your application to meet your technical requirements. The ATM/T will output 2 x 4-20mA signals to the Prosens QM-100 which can display the 2 readings side by side or flicking between the readings over a specified time. It is also fitted with 2 electronic relays which could be used to alarm if required.
ATM/T Pressure & Temperature Dual Output Sensor
- SKU ID: s1-atmt-2-20100
- Part No: 261.0614.0105.00.U
- Pressure Range: 0 – 60 psi g
- Output Signal: 4-20mA / 2-wire (shared GND with temperature sensor)
- Temperature Range: 0 to 100°C
- Output: 4-20mA / 2-wire (shared GND with pressure sensor)
- Accuracy: 0.5% FS
- Electrical Connection: DIN 43650 with metal threaded part, demountable
- Process Connection: G 1/2 male, frontal diaphragm
- Seals: Viton (standard)
ProSens QM100 Monitor & Controller
- SKU ID: s1-prosens-2-20100
- Part No: QM-100-00-0-1-1-11-1-10-3-2
- Type of probe: without probe
- Measurement 1: universal input (I, U, RTD, TC) (1)
- Measurement 2: universal input (I, U, RTD, TC) (1)
- Output: 2 x electronic relays (11)
- Display: LCD, 128 x 64 pixels (1)
- Communication interface: RS-485 / Modbus RTU (10)
- Power supply: 24V DC (3)
- Case: Wall mounted
- Protection Class: IP65
- The number of available glands: 2 pcs (2)