The XSYS-0011 is supplied as a portable transport case with a CMC Multicon colour touchscreen data logger plus an optional MLP-149 portable printer integrated .
Readout product info & help guides for digital readout instruments for displaying measurement readings of sensor inputs and providing controller output signals. Indicators and controllers for interfacing with pressure transducers, temperature probes, position sensors and load cells. Controllers for triggering an alarm or providing a continuous analogue output.
We are looking for an indicator with HMI software to show a machine operator the amount of force generated by a hydraulic puller-tensioner used for power line stringing.
This submersible pressure transducer and display can be used by landfill site pump techs to read leachate water level above the transducer at the well head.
The ProSens environmental monitor and controller is an industrial interface instrument which integrates a transmitter, display, meter and controller functions in one box.
I am hoping to use a borehole where the pump is about 25m below the surface. I would like the pump to operate automatically by switching on when the water has returned to about 14m below ground level and off at about 20m below the ground.
We need to measure the level of liquid in a pressurised tank. We have a pressure sensor at the top of the tank and one at the bottom.
Hygienic liquid level sensor and wall mounted digital display unit for measuring contents of a dairy silo in litres.
Wall mounted instrument for monitoring & controlling the climate in a room including room pressure, humidity and temperature sensor.
Vacuum suction sensor that can provide a digital readout and a switched contact when the pressure gets too high
Digital panel meters for displaying inputs from 4 wire ratiometric strain gauge sensors such as millivolt output pressure transducers and load cells.
Compact digital display modules for plugging onto the electrical interfaces of sensors to provide a local reading capability remote from the instrumentation control room.
Digital process indicators with configurable solenoid switch alarms for on/off control of single or multiple setpoints of TC, RTD, position or pressure sensor input readings.
Digital readout instruments for displaying measurement readings of sensor inputs and providing controller output signals.
Digital controllers for panel or bench mounting which provide variable or continuous control outputs for controlling pumps, valves, heaters, actuators or motors.
I’m looking for a pressure sensor to use on a salt water pump to measure pressures between 100 and 250 psi which includes a digital gauge
Submersible hydrostatic level transmitter with a range of 0 – 25 metres for installing outdoors and a digital indicator for installing indoors.
We need to measure the water level in a well down to 200 meters to protect a well pump by ensuring that it always stays under water
I’m looking for a high pressure gauge (0-1600bar) with a direct visible read-out display.
50 psi range 4-20mA output pressure transmitter for use on 25 psi saturated steam.
barometric pressure transmitter that can measure ambient air pressure from 1013-1400 mb in a chamber and provide a 4-20 mA output signal.
sensor and panel mount digital indicator for measuring the overload pressure in a mechanical press
differential pressure transmitter with an attached digital display for use on high temperature air up to 90 degC with a range of 0 to 250 mmWC
The SWL is a a IP68 pressure sensor which is made from Marine bronze for compatibility with sea-water.
Pressure transmitter and remote readout for measuring hydraulic fluid from 0-10,000psi.
4-20mA pressure transducer and manual digital readout with logging facility to enable pressure tests up to 100 bar to be logged with respect to time at a sample rate of 10 Hz.
Current output digital gauge for pneumatic Oxygen in the range of 0 to 400 bar pressure with 1/4 BSP P male thread connection fitting.
Sensor and panel indicator to monitor a pressure drop through a casting of up to 10 kilopascals.
4-20 milliamp loop powered high range pressure gauge for measuring 0 to 20,000 psi gauge.
Differential pressure transmitter with indicator for measuring -15000 to +15000 pascals.
Combined low range digital pressure indicator and voltage free contact relay pressure switch for monitoring and control over the differential range 0 to 150 pascals.
4-20mA input to 4-20mA re-transmission output plug-on digital readout.
Differential pressure sensor and local indicator for measuring dp of fluids over the range of 0 to 100 mbar diff
Wet wet differential pressure sensor and digital panel indicator for measuring fresh water pressure from 0 to 150 psi.
I am looking to measure the pressure difference across a water cooler with a maximum diff pressure of 2 bar
I need a hydraulic transducer that measures pressure up to 3000 psi pressure units with a separate digital read out that can be located away from the transducer.
We are looking for a digital pressure indicator for use with high temperature gas to a maximum temperature of 270 degC
Plug-on digital display for adding a local indicator to a pressure or liquid level sensor with a 4-20mA or 0-10Vdc output and optional ATEX IS approval.
An easy to install wall mounted digital display for use in high humidity or outdoor environments.
Four digit reading digital indicator for monitoring the signal from mA, volts or mV output sensors with settable alarms for switching fans, pumps or valves.
Multifunctional digital controller & datalogger for processing the signal from an extensive range of sensors for the purpose of controlling a process or recording data.
LED digital indicator for wheatstone bridge millivolt and potentiometer input signals with adjustable relay switches for controlling process equipment.
LED digital panel readout for strain gauge and potentiometer input signals with configurable process alarms, 5 digit LED display and an accuracy of 0.2%FS.
LED digital readout display with up to 4 configrable process alarm relays for mounting in a 48mm x 48mm (1/16 DIN) panel cutout.
Digital meter with a 4 digit display for mounting in a 48mm x 48mm (1/16 DIN) panel for measuring volts, current, TC, RTD, PTC, NTC or potentiometer signal.
Digital Readout with alarm relays for mounting in a process or test panel which can be used with pressure transducers & transmitters, thermocouples, RTD, potentiometers, current loop & amplified voltage output sensors.
Panel mount LED display instrument with up to 4 sensor input channels, 4 relay or logic outputs, high speed display update and maths function.
Digital Readout with LED display for mounting in a panel which can accept inputs from thermocouples, RTD, potentiometers, current loop & amplified voltage output sensors.
Green or Red LED multi-display configurable digital instrument for monitoring and controlling industrial processes.
DIN 43650A plug-in current loop powered LED display with optional ATEX approval for intrinsically safe use in hazardous areas.