I’m looking for a 50 psi range 4-20mA output pressure transmitter for use on 25 psi saturated steam which has a 1/4 inch NPT male connection and an integrated digital display.
25 psi saturated steam is around 115°C so you will need to use a pressure transmitter that has some in-built protection against high temperature media. The IMP has the option for a cooling element which will protect it from temperatures up to a maximum of 150°C. The cooling element relies on air cooling and therefore the surrounding air temperature must be much lower for the cooling element to work.
IMP 150°C High Temperature Pressure Transmitter
- Pressure Range: 50
- Units: psi
- Range Type: Positive Gauge (atm to +P)
- Output Signal: 4 – 20mA, 2-wire (5)
- Non-Linearity and Hysteresis: 0.25% FS (standard) (A)
- Thermal Zero Shift: 0.04% FS per °C (standard) (4)
- Electrical Connection: Large DIN plug (standard) (B)
- Process Connection: 1/4 NPT male, 150°C Integrated cooler (R)
- Media Exposed Seals: Viton (standard)(V)
- Special Requirements: Standard (000)
PA430 Add-On LED Display
- Electrical Connection (Output / Input): DIN43650A plug IP65 / DIN43650A plug IP65
- Output Signal: 4-20mA (2 wire)
- Switch Output: None
- Units Label: Fitted by user