An externally mounted liquid level transducer for measuring the height of soap water solution with up to 50% NaOH concentration, over a range of 0 to 200in from the G1 1/2 male process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.
Chemical corrosion resistant measurement instrumentation. Sensors with PVDF, PVC or PP housings for compatibility with aggressive chemicals.
A plastic submersible liquid level sensor for submerging in a chemical tank used for injecting minerals into water lines on farms, and measuring the depth over a range of 0 to 120 cm from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
A submersible PVC and ceramic based construction liquid level sensor for submerging in a gravity drained or pumped liquid chemical tank and measuring the depth over a range of 0 to 10m from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
A plastic submersible liquid level sensor for submerging in a chemical tank and measuring the depth over a range of 0 to 250cm from the nose cone, and sending the corresponding 0-10Vdc signal through the submersible FEP coated cable electrical connection.
An intrinsically safe externally mounted liquid level sensor for measuring the height of a liquid chemical over a range of 0 to 50in from the triclamp process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
An externally mounted chemical liquid level sensor for measuring the height of ferrous chloride & hydrochloric acid over a range of 0 to 60in from the G1 1/2 male process connection, and sending the corresponding 0-10Vdc signal through the weather proof cable electrical connection.
A hydro-static pressure transmitter for storage tank level monitoring use to measure level of 36% hydrochloric acid over a range of 0 to 1 mH2O g by immersion in the tank, and sending the corresponding 4-20mA signal through the submersible electrical connection.
I have a 300 gallon enclosed 4 feet high round tank which is filled with sodium hypochlorite (bleach). I need a non-metallic level sensor that will output a 4-20ma signal. I can’t have any metal in contact with the bleach.
Pressure sensor with a 4 to 20 milliamp output for measuring water pressure up to 16 bar gauge with a high sulfuric acid content up to 10%
Pressure transmitters & transducers that are resistant to chemical corrosion for measuring the hydrostatic level of storage tanks or process pressures.
Depth probe for monitoring the level of raw leachate in feed tanks up to 1 metre high on a landfill site.
Differential pressure transmitters to use on Nitrogen and/or air containing low levels of flammable solvents.
We’re looking for a hydrostatic level transmitter which is resistant to acids & chemicals including Chlorine & ferric chloride acid (FeCl3) dissolved in water
The chemical resistant LMK806 submersible level probe is designed for use in confined spaces with aggressive media.
level measurement of sulfuric acid tanks with a concentration between 12 and 15%.
The DMK351 is a low range intrinsically safe certified pressure transmitter with a ceramic diaphragm that provides high chemical corrosion.
Small manometer device with membrane protected against corrosive material (chemicals) and which we would prefer to be covered with Hastelloy steel.
PVC is a widely used plastic which is cheap to produce and hard enough to be used as a component parts construction material.
A guide to flush diaphragm pressure & level measurement instrumentation, including explanations, applications and a choice of products with flush process fittings.
Fluorinated Ethylene Propylene (FEP) is a resin coating that has a very high chemical and temperature resistance.
Is there a sensor that is suitable for measuring the level of a corrosive liquid up to about a foot in height, which is held in a vessel that is surrounded by a water bath?
Pressure sensor resistant to low levels of Chlorine dioxide (<100mg/L) up to 20 bar.
This is a list of web resources for checking the compatibility of materials with different liquids and gases.
This pressure transmitter can be supplied with a PVDF process connector so that it can be used to measure the pressure of acids and other corrosive chemicals.
Screw-in liquid level sensor for measuring the height of biodiesel with 3% sulfuric acid (H2SO4) from 0 to 1 metre head
Submersible sensor for measuring both level and temperature of 50% Sodium Hydroxide (NaOH) solution.
1 bar g range pressure transmitter suitable for use in swimming pool systems that contain a low concentration of Chlorine in the water.
We have a horizontal cylindrical type tank which has a diameter of 2 meter and a length of 7 meters. This tank is used for storage of chemicals.
Flush capacitive ceramic pressure sensor for measuring corrosive and viscous liquid level from levels 0.4 metres of water up to 200 mH2O.
IP68 mid range pressure transmitter for measuring the level of highly contaminated and aggressive liquid media with a body made from PP-HT.
IP68 low range pressure transmitter for measuring the level of highly contaminated and agressive liquid media with a body made from PP-HT or PVDF.
Level pressure sensor with semi-flush ceramic diaphragm and stainless steel or PVDF wetted parts in ranges from 0-4 to 600mH2O gauge.