A hydro-static pressure transmitter for storage tank level monitoring use to measure level of 36% hydrochloric acid over a range of 0 to 1 mH2O g by immersion in the tank, and sending the corresponding 4-20mA signal through the submersible electrical connection.
This LMK 809 submersible plastic body hydro-static pressure transmitter can be used in storage tanks to measure 36% hydrochloric acid level from 0 to 1 metres of water column gauge.
The sensor is installed by hanging it from hte top of the storage tank and lowering it close to the bottom of the tank to measure the 36% hydrochloric acid. The 4 to 20 milliamp current output is connected to signal monitoring instrumentation using the submersible IP68 sealed gland and FEP coated cable.
Also the acid resistant ceramic sensor is housed in a PVDF body casing and sealed together using a FKM O elastomer O rings to meet the requirements of measuring 36% hydrochloric acid hydro-static pressure in storage tank level monitoring applications.
LMK809 Submersible Acid Hydro-Static Pressure Transmitter
- SKU ID: s1-lmk809-91-16885
- Pressure Range: 1
- Units: mH2O
- Reference Type: Gauge / Vented (atm to +P)
- Output Signal: 4-20mA, 2 wire
- Accuracy: 0.35% FS
- Installation Type: Submersible probe with removable nose cone
- Housing Material: PVDF
- Diaphragm Material: Ceramic Al2O3 99.9%
- Media Exposed Seals: FKM
- Cable Type: FEP (70degC max)
- Cable Length: 5
- Cable Length Units: Metres (m)