Wastewater submersible sensors & instruments for installing in sewage treatment systems, landfill sites and other industrial waste management sites.
Wastewater
Wastewater compatible measurement product specifications and application help for installations which require instrumentation that is resistant to corrosion and include features which prevent the build up of material on components which might impede performance.
LMK 858 Plastic Submersible Liquid Level Sensor with Removable Cable
Chemical resistant liquid level sensor with detachable signal cable for measuring quantity of aggressive media such acids and alkalis and sludge in tanks located outside of factory buildings.
DCL 551 RS485 Modbus RTU Submersible Low Range Fuel, Oil & Wastewater Level Probe
Low range digital interface submersible liquid level probe with RS 485 Modbus RTU protocol serial bus communications for measuring level of fuel, oil and wastewater in low fill height open tanks.
DCL 571 RS485 Modbus RTU Submersible 22mm dia Groundwater & Wastewater Level Probe
22mm diameter digital interface submersible liquid level probe with RS 485 Modbus RTU protocol serial bus communications for installing in 1″ diameter tubes to measure groundwater level and measuring wastewater with nose cone removed.
Hot leachate level transmitter for 20m deep well monitoring on landfill sites
Submersible level transmitter for well on a landfill site to monitor hot and aggressive leachate.
ELPO car paint plant 40ft high wastewater tank level transmitter
An externally mounted liquid level transmitter for measuring the height of wastewater from a electro-coat paint operation in a car paint plant over a range of 0 to 40ft from the G1 1/2 flush diaphragm process connection, and sending the corresponding 4-20mA signal through the weather proof cable electrical connection.
Grease trap waste receiving tank 2m range 4-20mA level transmitter
An externally mounted liquid level transmitter for measuring the height of wastewater in a grease trap waste receiving tank over a range of 0 to 2m from the G1 1/2 flush diaphragm process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
65 inch range 4-20mA output intrinsically safe IBC tote wastewater level transmitter
An intrinsically safe externally mounted liquid level transmitter for measuring the height of wastewater over a range of 0 to 65in from the 1/2 NPT male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
600 barg 4-20mA output wastewater pressure sensor for experimental component testing
A high range gauge pressure sensor for experimental testing use to measure pressure of wastewater over a range of 0 to 600 bar g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
1 barg IS certified 4-20mA submersible leachate pressure sensor for tank level gauging use
An intrinsically safe submersible wastewater gauge pressure sensor for tank level gauging use to measure pressure of leachate over a range of 0 to 1 bar g from the G1/2 male process connection, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
3m range 4-20mA output submersible seawater dewatering tank level sensor
A low range submersible liquid level sensor for submerging in a seawater dewatering tank and measuring the depth over a range of 0 to 3m from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
140 inch range rangeable 4-20mA output wastewater level sensor and display for external fitting
A digital display combine with a rangeable externally mounted liquid level sensor for measuring the height of wastewater over a range of 0 to 140in from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
10psig 4-20mA oily wastewater pressure sensor with hi-temp protection for tank level gauging use
A low range hi-temp media 150°C/302°F protected max gauge pressure sensor for tank level gauging use to measure pressure of oily wastewater over a range of 0 to 10 psi g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the weatherproof cable electrical connection.
Dirty water, sludge & sewerage tank level 400 mbar pressure sensor
Flush ceramic diaphragm pressure sensor for measuring level of a dirty water, sludge & sewerage tank.
Wastewater holding tank submersible 8 feet deep level monitoring pressure transmitter
Submersible pressure transmitter with a flush diaphragm & intrinsic safety approval for measuring the level of wastewater in a holding tank which is 8 feet high.
Waste Water Level Sensors
Waste water Level sensors with open face flush diaphragms for measuring the hydrostatic pressure of sewage and effluent waste. Select a level sensor for mounting inside or external to a tank or sewer pipe.
Landfill leachate 2.5 mWG range level sensor with 5 volt output
What submersible sensor to measure 0-2.5mWG level of landfill leachate with a 0-5Vdc output?
LMK387 Cleanable Sewage and Sludge Pressure/Level Sensor
Rugged and easily cleanable pressure/level sensor for use with waste water sewage or sludge.
LMK 806 Plastic 21mm diameter Submersible Level Probe
The chemical resistant LMK806 submersible level probe is designed for use in confined spaces with aggressive media.
Landfill level probe for measuring 6 metre depth of leachate
Submersible level probe with a high corrosion resistant SS316L body and chemical resistant ceramic diaphragm for use with leachate
5m deep sewage wastewater submersible level sensor
Submersible level sensor with a flush ceramic sensing diaphragm which is ideal for use on sewage wastewater
Water reclamation system 6 bar range pressure transmitter for marine use
Marine certified pressure transmitter for use in water reclamation system with a flush diaphragm to discourage build up of solids on the diaphragm face.
LMK307 Submersible Waste Water Level Sensor
Submersible waste water level sensor with optional intrinsic safety certification for monitoring the level of sewage and effluent in water treatment plants.
LMK351 High Overpressure Flush Level Transmitter
Flush capacitive ceramic pressure sensor for measuring corrosive and viscous liquid level from levels 0.4 metres of water up to 200 mH2O.
LMK331 Screw-In Ceramic Level Transmitter
Level pressure sensor with semi-flush ceramic diaphragm and stainless steel or PVDF wetted parts in ranges from 0-4 to 600mH2O gauge.
Leachate holding tank, submersible level sensor for 5 meter depth
Pressure sensor for measuring leachate in a holding tank which has a ATEX rated 4-20mA output and a range from 0 to 5 meters sensing depth plus 10m of cable.
Immersible sewage level transmitter for pressures up to 15 psi
Pressure sensor that can be used can be immersed in sewage to measure level up to 15 psi gauge.
Immersible sewage level transmitter for pressures up to 5 psi
Pressure sensor that can be used can be immersed in sewage to measure level up to 5 psi gauge.
20 foot deep detention water tank level sensor with 4 to 20 mA output
Low range waste water level transmitter to monitor level in detention tank.
IP68 sewage level transmitter for monitoring up to 6 metres depth of waste water
Submersible ATEX approved liquid level sensor with a 4 to 20 milliamp output for measuring 0 to 20 feet of sewage.
2 mWC waste water submersible pressure transmitter with 1/2 BSP female fitting
4 to 20 milliamp output submersible wastewater pressure sensor for installing on 1/2 BSP thread pipe fitting
RS485 submersible wastewater level and temperature sensor for 3 metre depth
Submersible waste water level and temperature probe with integral RS485 interface electronics for monitoring wastewater depth up to 3 meters.
Level transmitter for waste water tank 10 feet deep
I am looking for a liquid level measurement device for use with wastewater effluent to depth of 10 feet.
LMK382 Low Range IP68 Waste Water Level Transmitter
Submersible Low Range waste water level transmitter with intrinsically safe option for monitoring the level of sewage and effluent in water treatment plants.
LMK807 Plastic Submersible Level Transmitter
IP68 mid range pressure transmitter for measuring the level of highly contaminated and aggressive liquid media with a body made from PP-HT.
LMK809 Plastic Submersible Low Level Transmitter
IP68 low range pressure transmitter for measuring the level of highly contaminated and agressive liquid media with a body made from PP-HT or PVDF.