Resistive strain gauge device.
Thin film deposition surface layer.
This strain gauge transducer millivolt output calculator provides a way to determine the output reading and range from the applied stress, strain gauge transducer range and strain gauge output characteristics.
Economical corrosion resistant ceramic diaphragm pressure sensor for educational measurement instrumentation measuring over a 0-1 bar absolute pressure range and generating a strain gauge millivolt output signal.
A strain gauge output pressure sensor for food processing use to measure pressure of air over a range of 0 to 100 psi g from the 1/4 NPT male process connection, and sending the corresponding mV/V signal through the DIN plug electrical connection.
Thin film deposition surface layer, active strain gauge bridge circuit, pressure measurement device with signal output.
Digital panel meters for displaying inputs from 4 wire ratiometric strain gauge sensors such as millivolt output pressure transducers and load cells.
The STRAIN universal strain gauge bridge input transmitter can connect any strain gauge loadcell or pressure transducer & provide a mA or volts output
This guide will help you select a millivolt output pressure transducer and explain the advantages of using this type of pressure sensor.
Water resistant pressure sensor for measuring hydrostatic pressures in the range of 0-0.5 mWC up to 0-100 mWC.
Economical IP68 protected sensor with stainless steel 316L housing and Ceramic strain gauge sensing diaphragm for measuring liquid depth pressure.
IP68 protect pressure sensor for monitoring potable water level to depths of 100 metres.
Piezoresistive strain gauges are a semiconductor material which changes in resistance when the material stretched or compressed.
Span Sensitivity defines the output signal characteristic of a strain gauge based sensor independent of measurement range or supply voltage.
Wheatstone bridge strain gauge circuits are used extensively inside transducer to convert a mechanical strain into an electrical output signal.
Bonded foil strain gauges (BFSG) are metal based foil elements that are incorporated into a flexible electrically insulating material which can then be bonded to a surface with adhesives. As stress is applied to the material, the BFSG will deform and the resistance changes. If a voltage is applied across the BFSG it can be […]
In the case of load cell calibration how is the value of shunt resistor defined? Does it depend on the capacity of the load cell? It’s not a function of load directly, the shunt resistance for calibration of a load cell is dependent on the strain gauge bridge resistance and the output sensitivity of the […]
What is the method of shunt calibration in relation to an indicator connected to a pressure transducer?
It is an electrical signal which is proportional to the applied excitation voltage and is also referred to as a ratio-metric or strain gauge output.
Analogue output sensor for immersing in seawater to determine depth or change in water level by measuring hydrostatic pressure.
1/2 inch diameter sensor for measuring both temperature and pressure in one device.
Miniature size 1/2 inch diameter stainless steel pressure sensor with an amplified 0.5 to 4.5 Vdc output. Pressure ranges start from 10 up to 400 bar.
DMP 334 is a high range pressure transducer designed for measuring hydraulic pressures up to 2200 bar (32,000 psi) .
LED digital indicator for wheatstone bridge millivolt and potentiometer input signals with adjustable relay switches for controlling process equipment.
Absolute reference hydrostatic depth sensor with an IP68 sealed electrical interface, SS316L, Duplex or PVC housing and a mV, voltage or current output.
Millivolt strain gauge output signal hydrostatic level sensor with an IP68 sealed electrical connection, stainless steel 316L, Duplex or PVC housing.
LED digital panel readout for strain gauge and potentiometer input signals with configurable process alarms, 5 digit LED display and an accuracy of 0.2%FS.
Ceramic strain gauge pressure transducer with a 2mV/V or 10mV/V output signal in pressure ranges from 1 bar up to 700 bar gauge or absolute.
Very high range pressure sensor with a millivolt output signal for pressure ranges from 1000 up to 5000 bar gauge.
Flush diaphragm piezo-resistive pressure sensor for food processing and plastic injection moulding applications with a millivolt output signal in pressure ranges from 10 up to 1000 barg.
Strain gauge pressure sensor with a millivolt output direct from a four arm wheatstone bridge strain gauge circuit in pressure ranges from 10 up to 1000 bar gauge.
For the best frequency response use a strain gauge pressure transducer that provides a mV output without any amplification.