HVAC chilled water wireless pressure monitoring in BMS

Upgrade your Building Management System with a reliable wireless pressure sensing system. This case study explores the implementation of a 0-10 bar gauge wireless transducer and receiver pair for HVAC applications, highlighting the ‘plug and play’ installation and long-term, low-maintenance operation.

Dairy farm water management using wireless ethernet gateway with submersible level sensors

Discover a robust solution for monitoring water levels in remote underground tanks. Learn how submersible sensors and a wireless-to-Ethernet gateway can overcome power and distance challenges in agricultural settings.

Remote monitoring of natural gas pressure in large commercial buildings

Discover how wireless pressure transducers and an IoT gateway provided a cost-effective solution for remotely monitoring natural gas pressure to high-level radiant heaters in a large arena, eliminating the need for costly wiring and manual data collection.

Rotating planetary ball mill containers wireless temperature monitoring

Wireless transmitter and USB receiver for monitoring a planetary ball mill for days. Measure and log surface temperature on rotating equipment.

Near-atmospheric pressure transmitter for hazardous gas test chambers

Intrinsically safe pressure transmitter configured for a narrow, sub-atmospheric range to safely monitor dangerous gases in a test chamber.

Detecting water intake blockage on submerged reservoir intake screen using two sensors

Discover a robust solution for measuring head loss and detecting ice blockages on remote water intake screens. Learn how dual submersible pressure transmitters with 4-20mA outputs overcome long-distance signal transmission challenges in reservoir monitoring.

High temperature mini sewage tank level sensor

Submersible level sensor for low-range sewage applications in small, high-temperature wastewater tanks.

Yacht diesel fuel and water level sensor for non-uniform shaped marine tanks

Submersible level sensors for irregularly shaped fresh water, grey water, black water, and fuel oil tanks on a classic sailing yacht.

Yacht fuel tank hydrostatic transmitter to replace float level sensors on shallow tanks

Replacing unreliable float switches in a yacht’s diesel tank? See how an IP68-rated submersible pressure transducer with FKM seals and a 316L diaphragm provided a robust and accurate solution.

Deep water pump motor diagnostics subsea temperature transmitter

Explore a robust solution for monitoring temperature on electric motors submerged 200 meters deep. A subsea transmitter with a high-integrity connector overcomes high-pressure challenges.

Dual alarm relays for a 4-20ma airflow velocity signal

Find out how a trip amplifier was used to add dual relay outputs for high and low alarm control directly from a 4-20mA airflow sensor signal, simplifying system design and reducing costs.

Oilfield chemical injection system remote wireless pressure monitor

Wireless pressure sensing system with cellular data transmission for monitoring chemical injection manifolds on remote oilfield wells.

HVO and FAME biofuel storage tank submersible level sensor

Explore a solution for reliably measuring the level of biodiesel fuels such as HVO and FAME. A submersible level transmitter was specified with carefully selected wetted parts, including an FEP cable and FKM seals, to ensure long-term chemical compatibility in alternative fuel storage tanks.

USV fire suppression seawater pressure monitoring using wireless sensor system

Discover how robust wireless pressure transducers and an RS485 gateway provide real-time fire suppression system monitoring on unmanned surface vehicles (USVs), overcoming challenges of seawater, interference, and battery life.

Abstraction pump protection using a screw-on hydrostatic level transmitter in a tidal river

Learn about the deployment of a 4-20mA screw-on hydrostatic level sensor for monitoring fluctuating seawater levels. Key aspects include the benefits of a fixed threaded mounting, diaphragm vulnerability without a nose cone, and protecting the atmospheric vent tube.

Marine air lubrication system submersible seawater resistant air pressure transmitter

Measuring gauge air pressure inside a pipe near an underwater air injector for a ship’s drag reduction system. Marine grade pressure sensors provide essential accuracy and seawater resistance for reliable component testing and performance tuning at depths down to 10 meters.

0-24V to 0-10V Signal Conversion

Convert a 0 to 24 volt range measurement input signal into a 0 to 10 volts output signal.

0-24V to 1-5V Signal Conversion

Convert a 0 to 24 volt range measurement input signal into a 1 to 5 volts output signal.

0-24V to 0-5V Signal Conversion

Convert a 0 to 24 volt range measurement input signal into a 0 to 5 volts output signal.

0-24V to 0-20mA Signal Conversion

Convert a 0 to 24 volts range measurement input signal into a 0 to 20 milliamps current output signal.

4-20mA to 1-6V Signal Conversion

Convert a 4 to 20 milliamps range measurement input signal into 1 to 6 volts output signal.

1-6V to 4-20mA Signal Conversion

Convert a 1 to 6 volts range measurement input signal into a 4 to 20 milliamps loop output signal.

4-20mA to 1-10V Signal Conversion

Convert a 4 to 20 milliamps range measurement input signal into 1 to 10 volts output signal.

4-20mA to 2-10V Signal Conversion

Convert a 4 to 20 milliamps range measurement input signal into 2 to 10 volts output signal.

1-10V to 4-20mA Signal Conversion

Convert a 1 to 10 volts range measurement input signal into a 4 to 20 milliamps loop output signal.

2-10V to 4-20mA Signal Conversion

Convert a 2 to 10 volts range measurement input signal into a 4 to 20 milliamps loop output signal.

15,000psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 15,000 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

10,000psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 10,000 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

7,500psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 7,500 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

6,000psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 6,000 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

5,000psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 5,000 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

4,000psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 4,000 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

3,000psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 3,000 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

2,500psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 2,500 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

2,000psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 2,000 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

1,500psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 1,500 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

1,000psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 1,000 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

750psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 750 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

600psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 600 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

500psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 500 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

400psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 400 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

300psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 300 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

250psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 250 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

200psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 200 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

150psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 150 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

100psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 100 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

75psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 75 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

50psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 50 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

30psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 20 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

25psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 25 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

20psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 20 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

-14.5…+14.5psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a -14.5 to +14.5 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

14.5psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 14.5 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

-15…+15psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a -15 to +15 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

15psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 15 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

-2.5…+2.5psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a -2.5 to +2.5 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

-2…+2psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a -2 to +2 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

-10…+10psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a -10 to +10 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

-5…+5psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a -5 to +5 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

-1…+1psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a -1 to +1 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

-0.5…+0.5psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a -0.5 to +0.5 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

0.5psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 0.5 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

1psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 1 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

2psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 2 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

2.5psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 2.5 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

5psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 5 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

10psi to 4-20mA Pressure Sensor Output Signal Conversion

Convert a 0 to 10 pounds per square inch range input pressure to a 4 to 20 milliamp output signal.

High Resolution Pressure Transducers

High resolution pressure transducers with an analog voltage output for detecting very small changes in pressure or measuring pressure to a high precision.

Intrinsically Safe Pressure Gauges

Specialized intrinsically safe pressure gauges designed for hazardous environments. Certified to ATEX and IECEx standards for safe operation in volatile gas and vapor atmospheres.

Battery Powered Pressure Gauges

Our battery-powered pressure gauges offer extended operation and are designed for continuous, reliable pressure monitoring in remote and industrial applications.

Flush Diaphragm Pressure Gauges

Specialized pressure gauges featuring a flush diaphragm design. Perfect for viscous liquids, slurries, and applications demanding high levels of cleanliness and hygiene.

Hydrostatic Liquid Level Voltage Output Pressure Transducers

Precision liquid level measurement with amplified voltage output hydrostatic pressure transducers. Ideal for industrial tanks, pump control, and volume calculation. 0-10V, 0-5V, and more.

Hydraulic Analog Voltage Signal Pressure Transducers

Measure extreme hydraulic pressures with our robust, voltage-output (0-5V, 0-10V) transducers. Designed for actuators, presses, & pumps. Ideal for demanding applications in automotive, aviation, and material testing.

Pressure Indicator Transducers

Pressure indicator transducers with voltage output and integrated digital display. Ideal for applications requiring both local indication and remote monitoring. No batteries needed.

SDI-12 Hydrostatic Liquid Level Sensors

SDI-12 hydrostatic liquid level sensors for remote environmental monitoring. Low power, digital output, ideal for battery-powered data loggers in hydrology & water resource management.

Voltage Output DP Transducers

Differential pressure transducers with amplified 0-5V, 1-5V, 0-10V, and 1-10V outputs for precise liquid and gas DP measurement in demanding industrial and research applications. Enhanced signal clarity and 3-wire configuration.

Intrinsically Safe Pressure Transmitters

Intrinsically safe pressure transmitters which are certified for use with zener barriers or galvanic isolators, as part of an hazardous area installation.

Underground Mining Intrinsically Safe Pressure Transmitters

Intrinsically safe pressure transmitters specifically certified for underground mining, engineered to prevent methane (firedamp) ignition. Robust, reliable, and compliant with stringent mining IS standards.

Wireless

Wireless sensor systems are a convenient and cost-effective way to monitor industrial processes and equipment.

Motorsport

Specialized sensors (pressure, temperature, position, force) designed for the extreme demands of motorsport. Lightweight, compact, and built for high vibration, temperature, and G-forces.

Floating dry dock ballast tank 14ft range 4-20mA output submersible seawater level sensor

14ft range submersible level sensor for monitoring the level of seawater in floating dry dock ballast tanks.

200m deep well pump water level sensor, switch & display

Protect your deep well pump with thhis submersible level transmitter and wall mounted indicator and alarm. This system provides reliable water level monitoring and pump protection at depths of up to 200 meters.

Borewell water level sensor for 100m water height

Low cost solution to measuring the water level in a borewell with a water height of as much as 100 metres above the submerged sensor

ATEX approved negative 10 mbar vacuum pressure transmitter

ATEX certified intrinsically safe pressure transmitter for measuring from 0 to minus 10 millibar gauge vacuum pressure.

Lube oil pressure sensor for use on ship engines to measure up to 10 bar

Marine approved pressure sensor for use on lube oil up to 10 bar with a maximum media temperature of 125°C and environment temperature of 85°C.

10Pa diff range 0-20mA output air pressure sensor for automotive component testing

A very low range pressure sensor for automotive component testing use to measure pressure of air over a range of 0 to 10 Pa diff from two barbed tube hose connections, and sending the corresponding 0-20mA signal through the DIN plug electrical connection.

Underground rain water storage tank level sensor and readout for 2 metre depth

Water level indicator for a 2 metre deep rain water storage tank located underground.

SIL2 approved 10 bar pressure transducer with 4 to 20 mA output

Pressure transducer with SIL 2 approved electronics that provide a 4-20mA output over a 0-10bar working range.

10,000 psi hydraulic pressure transmitter and panel readout

Monitor hydraulic systems up to 10,000 psi with this robust transmitter and panel readout combination.

3m range 4-20mA output submersible hot water tank level sensor

This submersible level sensor is suitable for use in hot water tanks. It features a 4-20mA output, 0-3m measurement range, and high-temperature resistance up to 125°C (257°F).

20 Pa DP range 0-10V output air pressure sensor for building management use

A low range 20 Pa range differential pressure sensor, ideal for monitoring filters, ventilation ducts, and HVAC systems in commercial and residential buildings.

Hydrochloric acid storage tank 1mH2Og hydro-static pressure transmitter

A hydro-static pressure transmitter for storage tank level monitoring use to measure level of 36% hydrochloric acid over a range of 0 to 1 mH2O g by immersion in the tank, and sending the corresponding 4-20mA signal through the submersible electrical connection.

760mmHg absolute range digital vacuum gauge

Digital vacuum gauge for measuring over the 0 to 760mmHg (millimetres of Mercury) absolute pressure range.

Dirty water, sludge & sewerage tank level 400 mbar pressure sensor

Flush ceramic diaphragm pressure sensor for measuring level of a dirty water, sludge & sewerage tank.

BMS water tank 6mH2Og range 0-10V out submersible level sensor for commercial buildings

This submersible level sensor provides accurate and reliable water level measurement in BMS applications in commercial office buildings, with a 0 to 6 mH2O gauge pressure range and a 0 to 10V output signal.

100psig range 4-20mA output helium gas pressure sensor for research use

Gauge pressure sensor with 4-20mA output for measuring helium gas in research applications. Features all-welded stainless steel construction and a 1/4 NPT male process connection.

6m range 4-20mA submersible animal feed tank level and PT100 sensor

A hi-temp media 125°C/257°F max, RTD temperature measurement submersible liquid level sensor for submerging in an animal feed tank and measuring the depth over a range of 0 to 6m from the flush diaphragm, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.