A hi-temp media 125°C/257°F max submersible water level sensor for submerging in a hot water tank and measuring the depth over a range of 0 to 3m from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
This LMK 382 submersible hot water tank liquid level sensor which has a nose cone to protect the sensor diaphragm is used to measure the liquid height from 0 to 3 metres to monitor hot water tank.
The sensor is installed by lowering it into the hot water tank until the nose cone reaches the required measurement point. The measured hot water level is sent using a 4 to 20 milliamp current output signal through the submersible IP68 sealed cable to connected liquid level monitoring instrumentation.
Also high media temperature protection up to 125degC or 257degF is included with this submersible water level sensor to meet the requirements of measuring hot water tank contents.
LMK 382 Submersible Hot Water Level Sensor
- SKU ID: s1-lmk382-92-18013
- Pressure Range: 0 – 3mWG
- Output Signal: 4-20mA, 2-wire
- Accuracy: 0.35% FS
- Installation Type: Probe version with nose cone
- Housing Material: Stainless Steel 316L
- Diaphragm Material: Ceramic Al2O3 96%
- Media Exposed Seals: FKM
- Cable Type: TPE (125 deg C max)
- Cable Length: 10
- Cable Length Units: Metres (m)