Scroll down to the required water column height between 1 and 40,000 feet of water to find the matching hydrostatic water pressure in bar.
Water related application info & water compatible product information.
Scroll down to the required water column height between 0.1 and 10,000 metres of water to find the matching hydrostatic water pressure in bar.
I have a small water system and I would like to monitor and record the pressure in psi and the flow in gpm in the system over an extended period of several months in order to determine the times and duration of peak demand and low pressure.
Economical corrosion resistant ceramic diaphragm pressure sensor for measuring water pressure over a 10 bar gauge pressure range on an automotive test rig and generating a 0 to 5 volts output signal.
An absolute pressure sensor for building management use to measure pressure of freshwater over a range of 0 to 150 psi abs from the 1/2 NPT male process connection, and sending the corresponding 0-5Vdc signal through the integral cable electrical connection.
Agricultural irrigation water low price corrosion resistant ceramic diaphragm pressure sensor for measuring over a 0 to 50 psi absolute pressure range and generating a ratiometric 0.5 to 4.5 volts output signal.
We are looking for a 4-20mA pressure transducer to measure pump pressure up to 2000 bar.
Water pressure data logger that can handle 0 – 300 psi, with adjustable recording time interval and a direct connection via a 1/4″ NPT fitting
Pressure sensor with a 4 to 20 milliamp output for measuring water pressure up to 16 bar gauge with a high sulfuric acid content up to 10%
Pressure sensor for measuring the differential pressure generated by water flowing through an orifice plate in a pipe, and converting the output to a water flow measurement.
Monitor the water pressure into buildings & factories, or a branch of the water lines provided by a municipality water supply in a city, town, housing estates or industrial parks.
Pressure data logger that can be used in a city municipal water supply system to monitor pressure changes when fire hydrants are flushed
This water pressure sensor has been custom configured for measuring incoming water mains pressure in commercial or industrial premises.
Monitor city water main pressure over scheduled time periods to analyse how public water supply pressure varies at different times.
I am looking to measure pressure in a water network with a range of 0-10bar, overpressure of 40 bar & 20m long IP68 protected cable for flood protection.
We have an application for a DP transmitter to indicate when a strainer needs to be cleaned.
I need a low cost 10 bar pressure sensor which will accept 5 Vdc power supply, output signal from 0,5 to 4.5 volt, and a pressure range of 0-10 bar
We require the pump to have a measuring range of 0/400 bar and the medium used to be distilled water.
We are looking for a solution to monitor water network pressure changes to detect leakage in a short time period.
The P-Triton-P is specifically designed for monitoring water supply pressures and storing readings for long term tests.
Water pressure transmitter with IP68, 0-10 bar pressure range, 4-20mA output for connecting to water pipes.
A pressure sensor for use in wet factory environments which are washed down daily.
The density of fresh water at a temperature of approximately 4 degrees Celsius is 1000 kg/m3.
Small diameter pressure sensor of lowering inside a 20mm pipe to monitor water depth 30 metres below ground level.
Absolute pressure sensor for testing a water pump input and output pressure up to 30 psi absolute. This sensor can be used to measure the maximum vacuum pressure of the pump when the input is blocked. IMP Water Pressure Sensor Datum: Absolute (A) Pressure Range: 30 psi (P030) Output: 0 – 10V, 3-wire (7) Non-Linearity […]
Voltage output pressure transducer with a 0 – 5V dc signal out for measuring irrigation piping water pressure form 0-60bar.
Logging pressure gauge with dual range pressure sensor modules for measuring moist air from -10 psi up to 0 psi vacuum and water from 0 to 50 psi.
PC data acquisition and recording system to a maximum range of 30,000 psi.
Logging system for artesian bores with a water pressure up to 600 mbar gauge. This logger is environmentally protected to withstand sun and heat up to +70°C and rain.
Digital pressure gauge with an accuracy of 0.05% full scale for measuring the pressure of water and dry air up to 150 psi.
Freshwater compatible voltage output pressure transducer with a 50 psi gauge pressure range and a 0 to 10 volts electrical signal.
Sensor and panel indicator to monitor a pressure drop through a casting of up to 10 kilopascals.
4-20mA submersible water pressure transmitter for measuring water depth down to 1 bar.
Water tank pressure sensor with a 2.5 psi gauge range and a 10 volt dc output signal.
Handheld digital manometer for reading water pressure from 0 to 1,000 kPa with feature for recording maximum and minimum measurements, accuracy of better than 1% full scale, internal battery and pressure fittings for connecting to flexible tubing. 2000 Digital Manometer Pressure Range: 10 bar g/diff Protective rubber boot cover: Black Length of Nylon tubing if […]
Wet wet differential pressure sensor and digital panel indicator for measuring fresh water pressure from 0 to 150 psi.
2 wire 4-20mA loop transmitter for measuring the level of high temperature water up to 1 meter (3.3 feet).
What submersible pressure sensor should I purchase for measuring a hydrostatic pressure of fresh water up to 1 metre?
I am looking to measure the pressure difference across a water cooler with a maximum diff pressure of 2 bar
I am looking for a 4-20mA output DP sensor with a -1 to 3 bar differential range for use on water. The sensor will need to withstand an overpressure of 20 bar on the positive side and 1.5 bar on the negative side.
Scroll down to the required water pressure value between 0.01 and 1,000 bar to find the matching water column height in metres of water.