Pressure transmitter for measuring the differential pressure generated by water flowing through an orifice plate in a pipe, and converting the output to a water flow measurement. This version of the DPT200 dp transmitter converts the linear measured pressure to a square root extraction signal output, which will be directly proportional to flow of water through the pipe. The pressure range has been set to 0…10 kilopascals differential pressure, but can be adjusted by the operator for other applications from the lowest range setting of 0.1 kPa up to 40 kPa.
DPT200 SqRt Output DP Transmitter
- DPT200 data sheet
- Part No: 343-C-1-H-17-L-AL-AK0-N20-0-N20-0-02-11-1-580
- Pressure Datum: Differential Pressure
- Differential Pressure Range: 0 – 4mbar up to 0 – 400mbar
- Factory Set Range: 0 – 10 kPa
- Maximum Static Pressure: 160 bar
- Display: With display
- Output: 4-20mA/ 2-wire with HART
- Accuracy: <±0.075% / FSO IEC 60770
- Electrical Connection: Terminal clamp / M20 x 1.5 Cable Gland
- Housing Material: Aluminium
- Process Connection: Internal thread 1/4″ – 18 NPT
- Process Connection Material: Stainless Steel 1.4301 (304)
- Diaphragm Material: Stainless Steel 1.4435 (316L)
- Seal Material: FKM
- Special Options: Square root function (flow)
- Supply Voltage: 15 – 42 V dc
- IP Rating: 67
- Media Temperature: -40 to +100°C
- Operating Temperature: -20 to +65°C