Water tank pressure sensor with a 2.5 psi gauge range and a 10 volt dc output signal. This transducer is fitted to the outside of a water tank via a 1/2 NPT tapered thread connection.
DMP331 Precision Pressure Transducer
- Pressure Range: 0 to 2.5 psi gauge
- Output Signal: 0-10V (3 wire)
- Accuracy: 0.35% >0.4bar, 0.5% FS <=0.4bar (std, 11-12bit res)
- Electrical Connection: Cable gland IP67
- Length of PVC Cable (metres) if required: 3
- Pressure Connection: 1/2 NPT male
- Media Exposed Seals: FKM (standard)
- Compensated Temperature Range: 0 to +50/70 DegC (standard)