Submersible level transmitter for well on a landfill site to monitor hot and aggressive leachate.
Wireless pressure measurement kit for production monitoring use with a 30psig range plus a 1/4 NPT male fitting. Each pressure reading is transmitted wirelessly to a five channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.
Digital display pressure gauge for portable calibration use in air measurement applications, capable of measuring 0 to 30 psi abs pressure with 0.1% accuracy and connected using a 1/4 NPT male fitting. Also includes USB, logger, and data transfer software.
Pressure calibration kit for calibrating a submersible hydrostatic liquid level sensor out of the water using a battery powered automatic pressure controller calibrator to generate and accurate source of air pressure, and the necessary test hose and adapters to attach to the different types and styles of submersible pressure sensor probe ends.
Low cost submersible water level sensor with ceramic thick film strain gauge technology for measuring farm drainage open well over 0 to 60 ftH2O hydrostatic pressure range and sending out a 4 to 20 milliamps signal.
Wireless pressure measurement kit for production monitoring use with a -1barg, 2barg, 10barg range plus a 1/4 BSP male fitting. Each pressure reading is transmitted wirelessly to a five channel base receiver, where it is converted to a 1-5Vdc or 4-20mA analogue output signal.
A gauge pressure sensor for water treatment use to measure pressure of freshwater over a range of 0 to 200 kPa g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the DIN plug electrical connection.
we need to measure water level from 0 to 10 metres with a submersible pressure sensor, but we are going to have difficulty in getting some of the sensors vented to atmosphere pressure.
Economical corrosion resistant ceramic diaphragm pressure sensor for measuring over a 0-2 bar gauge pressure range and generating a 4 to 20 milliamps output signal.
Low cost stainless steel 316L submersible liquid level sensor with silicon strain gauge technology for measuring over a 2 bar absolute hydrostatic pressure range and sending out a 4 to 20 milliamps signal.
A high temperature media gauge pressure sensor for research use to measure pressure of water, ethanol and methanol vapor in a heat pipe over a range of -1 to 2 bar g from the G1/4 male process connection, and sending the corresponding 0-10Vdc signal through the DIN plug connector electrical connection.
A high accuracy absolute pressure sensor for air compression use to measure pressure of air over a range of 5 to 30 psi abs from the 1/4 NPT male process connection, and sending the corresponding 0-10Vdc signal through the integral cable electrical connection.
Economical corrosion resistant ceramic diaphragm air pressure sensor for measuring over a 2 bar gauge pressure range and generating a 0 to 5 volts output signal.
Economical corrosion resistant ceramic diaphragm pressure sensor for measuring over a 0 to 25 psi gauge pressure range and generating a 4 to 20 milliamps output signal.
Economical corrosion resistant ceramic diaphragm pressure sensor for measuring diesel tank level over a 60 ftH20 gauge pressure range and generating a 4 to 20 milliamps output signal.
A gauge pressure sensor for water level measuring use, beneath an elevated water tank to measure pressure of freshwater over a range of 0 to 30 psi g from the 1/4 NPT male process connection, and sending the corresponding 0-5Vdc signal through the integral cable electrical connection.
Low powered submersible water level transducer for measuring over a 0 to 20 mH2O gauge hydrostatic pressure range and sending a 0 to 2.5 volts output signal.
20 metre range level probe with an SDI-12 protocol serial digital interface for submerging near to the shore to monitor tidal changes.
Pressure sensor & instrument to measure and data log the pressure inside an oven during some heating tests.
0…20 mH2O or 0…66 ftH2O liquid level range, 4…20 mA, 0…10 V, or 0…5 V output signal hydrostatic liquid level sensors.
0…2 bar or 0…30 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors
0…2 bar, 0…30 psi, 0…2 kg/cm2, or 0…200 kPa pressure range, 4…20 mA output signal pressure sensors.
Differential pressure sensor to measure the differential pressure between the inlet and outlet of a vacuum pump.
ATEX pressure transmitter to measure the pressure of methane gas line in an anaerobic digestion plant.
I need a submersible pressure transducer for level measurement in a small diameter pipe that is up to 30 metres deep in a dam bank.
The IMP pressure transducer without any amplification electronics will provide a response time of around 23 microseconds (0.023 msec) for a 2 bar range.
The S12C is a submersible level probe with a SDI-12 protocol signal interface and has the option to measure absolute pressure rather than venting to air pressure above the water surface.
Absolute pressure sensor for testing a water pump input and output pressure up to 30 psi absolute. This sensor can be used to measure the maximum vacuum pressure of the pump when the input is blocked. IMP Water Pressure Sensor Datum: Absolute (A) Pressure Range: 30 psi (P030) Output: 0 – 10V, 3-wire (7) Non-Linearity […]
Barometric pressure transducer with a 0-30 psi absolute range and a 10 volt signal out.
4-20mA (2 wire) transmitter for monitoring sea water pressure up to 2 bar gauge on the cooling system of a marine diesel engine.
Pressure transducer for shop air up to 30 psi gauge with 0 to 5 volt output and a 1/4 inch tapered thread for connecting to a pipe.
Compound range pressure transducer with a -1 to +2 bar gauge bi-directional range scaled over a 0 to 5 volt dc output signal.
5 volt excitation pressure transducer with a 0.5-4.5V output for measuring dry gas over the range of 0 to 30 psia absolute pressure.
This calibrator kit includes a PGS40 calibration hand pump, and the LEX1 precision digital pressure gauge and essential accessories for connecting devices under test.
Half inch NPT male tapered thread pressure transmitter for use in an ATEX approved intrinsically safe area for measuring pressures from 0 to 2 bar gauge.
Vacuum pressure transmitter with 4-20mA current output for measuring absolute pressure from 0 to 30 psia
I am looking to measure the pressure difference across a water cooler with a maximum diff pressure of 2 bar