0…20 mH2O or 0…66 ftH2O liquid level range, 4…20 mA, 0…10 V, or 0…5 V output signal hydrostatic liquid level sensors.
These hydrostatic liquid level sensors will measure from 0 to 20 metres of water column or 0 to 66 feet of water column liquid level ranges, and convert the measured level to a corresponding output signal from 4 to 20 milliamps, 0 to 10 volts, or 0 to 5 volts.
Elevated freshwater tank level 30 psig range 0-5Vdc out pressure sensor
Farm drainage open well 60ft range 4-20mA output submersible liquid level sensor- 2 bar absolute range 4 -20 mA output submersible silicon diaphragm liquid level sensor
Dam bank narrow diameter submersible level transducer for 30m deep piezometer tubes
Calibration Tables
0…20 mH2O to 4…20 mA
Use this table to determine the exact calibration points for a 0…20 metres of water column range to 4…20 milliamps output hydrostatic liquid level sensor. For additional calibration points use our 0…20 mH2O to 4…20 mA converter and enter any value.
| % Scale | 0…20mH2O | 4…20mA |
|---|---|---|
| 0 | 0.00 | 4.00 |
| 10 | 2.00 | 5.60 |
| 20 | 4.00 | 7.20 |
| 30 | 6.00 | 8.80 |
| 40 | 8.00 | 10.40 |
| 50 | 10.00 | 12.00 |
| 60 | 12.00 | 13.60 |
| 70 | 14.00 | 15.20 |
| 80 | 16.00 | 16.80 |
| 90 | 18.00 | 18.40 |
| 100 | 20.00 | 20.00 |
Request product information for a 0...20 mH2O to 4...20 mA hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.
0…66 ftH2O to 4…20 mA
Use this table to determine the exact calibration points for a 0…66 feet of water column range to 4…20 milliamps output hydrostatic liquid level sensor. For additional calibration points use our 0…66 ftH2O to 4…20 mA converter and enter any value.
| % Scale | 0…66ftH2O | 4…20mA |
|---|---|---|
| 0 | 0.00 | 4.00 |
| 10 | 6.60 | 5.60 |
| 20 | 13.20 | 7.20 |
| 30 | 19.80 | 8.80 |
| 40 | 26.40 | 10.40 |
| 50 | 33.00 | 12.00 |
| 60 | 39.60 | 13.60 |
| 70 | 46.20 | 15.20 |
| 80 | 52.80 | 16.80 |
| 90 | 59.40 | 18.40 |
| 100 | 66.00 | 20.00 |
Request product information for a 0...66 ftH2O to 4...20 mA hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.
0…20 mH2O to 0…10 V
Use this table to determine the exact calibration points for a 0…20 metres of water column range to 0…10 volts output hydrostatic liquid level sensor. For additional calibration points use our 0…20 mH2O to 0…10 V converter and enter any value.
| % Scale | 0…20mH2O | 0…10V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 2.00 | 1.00 |
| 20 | 4.00 | 2.00 |
| 30 | 6.00 | 3.00 |
| 40 | 8.00 | 4.00 |
| 50 | 10.00 | 5.00 |
| 60 | 12.00 | 6.00 |
| 70 | 14.00 | 7.00 |
| 80 | 16.00 | 8.00 |
| 90 | 18.00 | 9.00 |
| 100 | 20.00 | 10.00 |
Request product information for a 0...20 mH2O to 0...10 V hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.
0…66 ftH2O to 0…10 V
Use this table to determine the exact calibration points for a 0…66 feet of water column range to 0…10 volts output hydrostatic liquid level sensor. For additional calibration points use our 0…66 ftH2O to 0…10 V converter and enter any value.
| % Scale | 0…66ftH2O | 0…10V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 6.60 | 1.00 |
| 20 | 13.20 | 2.00 |
| 30 | 19.80 | 3.00 |
| 40 | 26.40 | 4.00 |
| 50 | 33.00 | 5.00 |
| 60 | 39.60 | 6.00 |
| 70 | 46.20 | 7.00 |
| 80 | 52.80 | 8.00 |
| 90 | 59.40 | 9.00 |
| 100 | 66.00 | 10.00 |
Request product information for a 0...66 ftH2O to 0...10 V hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.
0…20 mH2O to 0…5 V
Use this table to determine the exact calibration points for a 0…20 metres of water column range to 0…5 volts output hydrostatic liquid level sensor. For additional calibration points use our 0…20 mH2O to 0…5 V converter and enter any value.
| % Scale | 0…20mH2O | 0…5V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 2.00 | 0.50 |
| 20 | 4.00 | 1.00 |
| 30 | 6.00 | 1.50 |
| 40 | 8.00 | 2.00 |
| 50 | 10.00 | 2.50 |
| 60 | 12.00 | 3.00 |
| 70 | 14.00 | 3.50 |
| 80 | 16.00 | 4.00 |
| 90 | 18.00 | 4.50 |
| 100 | 20.00 | 5.00 |
Request product information for a 0...20 mH2O to 0...5 V hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.
0…66 ftH2O to 0…5 V
Use this table to determine the exact calibration points for a 0…66 feet of water column range to 0…5 volts output hydrostatic liquid level sensor. For additional calibration points use our 0…66 ftH2O to 0…5 V converter and enter any value.
| % Scale | 0…66ftH2O | 0…5V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 6.60 | 0.50 |
| 20 | 13.20 | 1.00 |
| 30 | 19.80 | 1.50 |
| 40 | 26.40 | 2.00 |
| 50 | 33.00 | 2.50 |
| 60 | 39.60 | 3.00 |
| 70 | 46.20 | 3.50 |
| 80 | 52.80 | 4.00 |
| 90 | 59.40 | 4.50 |
| 100 | 66.00 | 5.00 |
Request product information for a 0...66 ftH2O to 0...5 V hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.