Enhance hydroelectric monitoring reliability with the LMK858 sensor. Built-in lightning protection and robust design for remote water level measurement.
Plastic Housing
2m range 0.6% conc. chlorine liquid level sensor
Corrosion resistant liquid level sensor to measure up to 2m chlorine solution 0.6% conc.
Plastic Submersible Hydrostatic Liquid Level Sensors
Chemical resistant submersible level sensors with a PVC housing and ceramic diaphragm for measuring the hydrostatic level of harsh chemicals.
Plastic Externally Fitted Hydrostatic Liquid Level Sensors
Plastic liquid level sensors with a PVDF housing and Ceramic diaphragm for fitting to the outside of a chemical storage tank.
Corrosive Chemical Compatible Flush Diaphragm Liquid Level Sensors
Fluid level sensors with plastic bodies and flush ceramic diaphragms for use with corrosive chemicals where no metal parts can be exposed to the media.
LMK 858 Plastic Submersible Liquid Level Sensor with Removable Cable
Chemical resistant liquid level sensor with detachable signal cable for measuring quantity of aggressive media such acids and alkalis and sludge in tanks located outside of factory buildings.
Hot leachate level transmitter for 20m deep well monitoring on landfill sites
Submersible level transmitter for well on a landfill site to monitor hot and aggressive leachate.
Contaminated groundwater submersible plastic body 5 psi pressure transducer & display
This submersible pressure transducer and display can be used by landfill site pump techs to read leachate water level above the transducer at the well head.
120cm range 4-20mA submersible chemical tank level sensor for farm water line mineral injection
A plastic submersible liquid level sensor for submerging in a chemical tank used for injecting minerals into water lines on farms, and measuring the depth over a range of 0 to 120 cm from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
10m high chemical tank 4-20mA output submersible PVC and ceramic protected liquid level sensor
A submersible PVC and ceramic based construction liquid level sensor for submerging in a gravity drained or pumped liquid chemical tank and measuring the depth over a range of 0 to 10m from the nose cone, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
250cm range 0-10Vdc output plastic submersible chemical tank level sensor
A plastic submersible liquid level sensor for submerging in a chemical tank and measuring the depth over a range of 0 to 250cm from the nose cone, and sending the corresponding 0-10Vdc signal through the submersible FEP coated cable electrical connection.
Hydrochloric acid storage tank 1mH2Og hydro-static pressure transmitter
A hydro-static pressure transmitter for storage tank level monitoring use to measure level of 36% hydrochloric acid over a range of 0 to 1 mH2O g by immersion in the tank, and sending the corresponding 4-20mA signal through the submersible electrical connection.
Non-metallic level sensor with 3 ftH2O range & 4-20mA signal
I have a 300 gallon enclosed 4 feet high round tank which is filled with sodium hypochlorite (bleach). I need a non-metallic level sensor that will output a 4-20ma signal. I can’t have any metal in contact with the bleach.
High sulphuric acid content resistant 16 bar g 4-20mA water pressure sensor
Pressure sensor with a 4 to 20 milliamp output for measuring water pressure up to 16 bar gauge with a high sulfuric acid content up to 10%
12ft high ink tank screw-in 4-20mA output level sensor
Hydrostatic level sensor with a 4-20mA output for screw on thread mounting and measuring the level of ink in a 12 foot high tank.
Plastic Submersible 4-20mA Liquid Level Sensors
Plastic based chemical resistant casing material, protected from liquid immersion, 4 to 20 mA current output signal liquid level sensor.
Ferric Chloride solution hydrostatic level transmitter
We’re looking for a hydrostatic level transmitter which is resistant to acids & chemicals including Chlorine & ferric chloride acid (FeCl3) dissolved in water
LMK 806 Plastic 21mm diameter Submersible Level Probe
The chemical resistant LMK806 submersible level probe is designed for use in confined spaces with aggressive media.
Sulfuric acid 12-15% conc. drop-in level probe for 10m high tank
level measurement of sulfuric acid tanks with a concentration between 12 and 15%.
Chlorine dioxide (ClO2) resistant 20 bar pressure sensor
Pressure sensor resistant to low levels of Chlorine dioxide (<100mg/L) up to 20 bar.
Swimming pool submersible pressure transmitter with 300 mbar range
Submersible pressure transmitter for use in swimming pools with a range of 0mbar to 300mbar.
1 metre screw-in plastic level sensor for biodiesel/sulphuric acid mixture with 4 to 20 mA output
Screw-in liquid level sensor for measuring the height of biodiesel with 3% sulfuric acid (H2SO4) from 0 to 1 metre head
Plastic seawater depth probe with 20ft range & 4-20mA out
Submersible pressure transmitter for the measuring of seawater at various depths from zero to twenty foot.
Measuring the volume of liquid in a horizontal cylinder tank
We have a horizontal cylindrical type tank which has a diameter of 2 meter and a length of 7 meters. This tank is used for storage of chemicals.
LMK807 Plastic Submersible Level Transmitter
IP68 mid range pressure transmitter for measuring the level of highly contaminated and aggressive liquid media with a body made from PP-HT.
LMK809 Plastic Submersible Low Level Transmitter
IP68 low range pressure transmitter for measuring the level of highly contaminated and agressive liquid media with a body made from PP-HT or PVDF.