We are looking to measure Argon pressure in a pipe flow which should be in the range of 20 mbar above atmospheric.
Gauge Pressure
Gauge pressure measurement instrumentation & application guides related to monitoring pressures relative to the surrounding atmospheric pressure.
Read, transmit and trip Methane gas pressure between 0-160mb g in one device
I am looking for a 4-20mA pressure transmitter device for measuring the pressure of methane (CH4) gas up to 160 mbar gauge.
One transmitter for measuring steam temperature to 150°C and pressure to 4kg/cm² g
The steam pressure range will be from 0 to 4 kg/cm2g and the temperature range will be 0-150 degC. Is there a product available which can do this?
Submersible sensor for measuring sludge pressure in pipe
Submersible pressure sensor to measure 10 bar pressure in pipe that is IP68 for long term submersion in sludge up to 6 metres deep.
Protecting low range river level sensor from storm surges
I’m looking to monitor the depth of water in a river up to around 1 metre deep, but occasionally there is a storm and the river swells to a depth of 10 metres.
Genset hydrostatic sensor for measuring level of small diesel tank up to 12 inches
Hydrostatic type sensor for submerging inside Genset fuel tanks to measure the level of diesel
0 to 5 volt output sensor for measuring low seawater level
What sensor would you suggest for measuring low levels of seawater with a 0-5Vdc?
3 wire 4 to 20mA pressure transmitter to measure 100 mbar
We are looking for a pressure transmitter with a range from 0 to 100 mbar and a 4-20mA output with a 3 wire electrical connection
Measuring 125 mm of water level range to 1mm accuracy
We are looking to measure liquid level to an accuracy of 1mm over a range of around 125mm.
What does the suffix a, abs, d, dp and diff, g, rel and sg mean after the pressure units in a pressure range?
There is a loose convention across manufacturers for designating the type of reference that a pressure sensing device has, which can be confusing if you are unfamiliar with specifying this often overlooked but critical specification parameter.
What is the difference between gauge and absolute pressure measurement
Determining whether you need gauge or absolute reference pressure is a very important to selecting the right pressure range for a pressure instrumentation.
Measuring liquid level in a sealed tank with a hydrostatic pressure sensor
In order to measure the level of a liquid using a pressure sensor you must be able to subtract the pressure of the gas at the top of the tank.
Measuring vacuum with negative gauge or absolute ranges
There are two reference points for measuring a vacuum pressure.