A digital display pressure transducer for hydraulic control use to measure pressure of mineral hydraulic oil over a range of 0 to 3,000 psi g from the 1/4 NPT male process connection, and sending the corresponding 0-10Vdc signal through the DIN plug electrical connection.
LED Display
Negative 30 inHg vacuum gauge with 0-10V output
Combined digital vacuum gauge and 0 to 10 volts analogue output for measuring from 0 to -30 inHg gauge pressure.
LED Readout Electronic Pressure Gauges
Pressure gauge with high visibility LED (Light Emitting Diode) digital readouts enable easy reading of pressure from a distance or in areas where there are poor lighting conditions.
Digital Manometers
Select a digital manometer for checking and testing low range pneumatic pressures. Select manometers by type of pressure connector, pressure media, precision and pressure range.
DS201 Combined Pressure Sensor, Display and Switch
Ceramic diaphragm diaphragm based pressure sensor, indicator & electronic switch with pressure ranges from 0-0.4 bar up to 0-600 bar.
DS200 Combined Pressure Switch, Gauge and Sensor
Three in one electronic pressure switch, digital pressure gauge and pressure sensor with pressure ranges from 100 mbar up to 600 bar (1.5 to 9000 psi).
Clean Room Monitor for Air Differential Pressure, Temperature and Humidity – PMDS4
The PMDS4 clean room monitor is designed for positive and negative monitoring of differential air pressure between the inside and outside of a clean room.
DS201P High Range Flush Pressure Gauge, Switch and Sensor
High pressure sensor, electronic switch and digital gauge with an all welded stainless steel flush diaphragm for high viscosity liquids.
DS200P Sanitary Low Range Pressure Gauge, Switch and Sensor
All in one electronic switch, gauge and sensor designed specifically for use in the food, drink and biomedical industry for measuring process pressures.
PA430 Add-On LED Display
Plug-on digital display for adding a local indicator to a pressure or liquid level sensor with a 4-20mA or 0-10Vdc output and optional ATEX IS approval.
SRP-N118 Digital Alarm Indicator for Wall Mounting
An easy to install wall mounted digital display for use in high humidity or outdoor environments.
SRP94 Large LED Process Display Panel Mount Indicator
Four digit reading digital indicator for monitoring the signal from mA, volts or mV output sensors with settable alarms for switching fans, pumps or valves.
40B48 Strain Gauge Indicator with Relay Switch Alarms
LED digital indicator for wheatstone bridge millivolt and potentiometer input signals with adjustable relay switches for controlling process equipment.
DS210 Combined Low Pressure Switch, Indicator and Sensor
Low range three in one pressure switch, pressure indicator and pressure sensor for use on pneumatics and HVAC applications.
DS200 Combined Hydrostatic Level Switch, Gauge and Sensor
Three in one hydrostatic level switch, digital level gauge and level sensor with level ranges from 1 mWG up to 600 mWG (3.3 to 1969 ftWG).
40B96 Strain Gauge Readout with Process Alarm Relays
LED digital panel readout for strain gauge and potentiometer input signals with configurable process alarms, 5 digit LED display and an accuracy of 0.2%FS.
40T48 Digital Readout with Alarm Relays
LED digital readout display with up to 4 configrable process alarm relays for mounting in a 48mm x 48mm (1/16 DIN) panel cutout.
4T48 Digital Panel Meter
Digital meter with a 4 digit display for mounting in a 48mm x 48mm (1/16 DIN) panel for measuring volts, current, TC, RTD, PTC, NTC or potentiometer signal.
40T96 Digital Process Alarm Indicator
Digital Readout with alarm relays for mounting in a process or test panel which can be used with pressure transducers & transmitters, thermocouples, RTD, potentiometers, current loop & amplified voltage output sensors.
2400 Multi Channel Digital Indicator
Panel mount LED display instrument with up to 4 sensor input channels, 4 relay or logic outputs, high speed display update and maths function.
4T96 Digital Panel Process Indicator
Digital Readout with LED display for mounting in a panel which can accept inputs from thermocouples, RTD, potentiometers, current loop & amplified voltage output sensors.
2500 High Performance Digital Controller
Green or Red LED multi-display configurable digital instrument for monitoring and controlling industrial processes.
TDP Plug-In Display for Pressure Transmitters
DIN 43650A plug-in current loop powered LED display with optional ATEX approval for intrinsically safe use in hazardous areas.