A food grade externally mounted dairy level transmitter for measuring the height of milk in farm storage vats over a range of 0 to 6m from the dairy pipe process connection, and sending the corresponding 4-20mA signal through the water proof cable electrical connection.
A externally mounted water tank level sensor for measuring the height of water over a range of 0 to 6m from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the M12 connector electrical connection.
Low cost stainless steel 316L submersible liquid level sensor with silicon strain gauge technology for measuring over a 0.6 bar gauge hydrostatic pressure range and sending out a 4 to 20 milliamps signal.
A hi-temp media 125°C/257°F max, RTD temperature measurement submersible liquid level sensor for submerging in an animal feed tank and measuring the depth over a range of 0 to 6m from the flush diaphragm, and sending the corresponding 4-20mA signal through the submersible cable electrical connection.
Low cost submersible water level sensor with ceramic thick film strain gauge technology for measuring the level of a water tank connected to a building management system, over a 0 to 6 mH2O gauge hydrostatic pressure range and sending out a 0 to 10 volts signal.
Digital pressure gauge for testing gauges used in diesel measurement applications, capable of measuring 0-6000 mmH2O g pressure to 0.1% accuracy and connected using a G1/2 male fitting. Also includes a UKAS cal cert.
Submersible water level sensor for monitoring the depth of water in a retention basin down to 20 feet.
0…6 mH2O or 0…20 ftH2O liquid level range, 4…20 mA, 0…10 V, or 0…5 V output signal hydrostatic liquid level sensors.
0…600 mbar or 0…9 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
0…600 mbar, 0…9 psi, 0…240 inH2O, or 0…60 kPa pressure range, 4…20 mA output signal pressure sensors.
Measure the level of a fresh water basin used for storing industrial process water in a cement plant.
This differential pressure (dp) transmitter can be used to measure the difference in upstream and downstream flowing pressure either side of a orifice plate.
We need a pressure sensor for measuring pond water depth to 20 feet with 100ft of cable, which requires low power so we can use with wireless systems.
Submersible level probe with a high corrosion resistant SS316L body and chemical resistant ceramic diaphragm for use with leachate
Submersible sensor for monitoring depth of surface water flowing to sea, which gets retained by a tide flap. No atex requirements.
What submersible sensor can you recommend with the following specification? Pressure transmitter for measuring depth of tide in a dock: Scale Range: 0 to 6 m seawater Operating Temp. Limits: +4 to +10 degC Accuracy: 0.01m Enclosure Protection: IP68 (submerged in up to 10m of seawater) Output Signal: 4-20mA The LMK458 is a marine approved […]
The Baroli 05 pressure gauge can be supplied with a negative gauge vacuum range and display the pressure in millimetres of mercury (mmHg) pressure units.
Vacuum differential transducer for using with a variable frequency drive to control vacuum air pressures down to 60 kilopascals (kPa). This differential transducer is easily adapted for measuring negative vacuum pressures by connecting the negative (-) port to the vacuum air pressure and the positive (+) port to the reference ambient pressure. DMD341 Vacuum […]
Hydrostatic principle level sensor and indicator for overcoming frothing problem on the surface of a rolling oil liquid inside a storage tank.
Logging system for artesian bores with a water pressure up to 600 mbar gauge. This logger is environmentally protected to withstand sun and heat up to +70°C and rain.
Low voltage output submersible pressure transducer for connecting to a data logger to measure water levels up to 6 metres deep in a river.
Submersible pressure transmitter for salt water tank applications to measure water levels up to 20 feet.
Ship approved ballast tank level transmitter for measuring sea water to depth of 6 metres.
Submersible pressure transmitter for the measuring of seawater at various depths from zero to twenty foot.
Submersible sensor for measuring both level and temperature of 50% Sodium Hydroxide (NaOH) solution.
Low range waste water level transmitter to monitor level in detention tank.
Submersible pressure sensor for measuring up to 6 metres of fresh water depth with a 2 wire 4 to 20 milliamp current loop output.
Submersible ATEX approved liquid level sensor with a 4 to 20 milliamp output for measuring 0 to 20 feet of sewage.
4-20mA output sensor for measuring the volume of milk in a milk silo which is 6 metres high.