A submersible liquid level sensor for submerging in a small diesel fuel tank and measuring the depth over a range of 0 to 50cm from the diaphragm behind the nose cone, and sending the corresponding 0.5-4.5Vdc signal through the submersible cable electrical connection.
200 mbar range hydrostatic level sensor for measuring the quantity of generator fuel oil in a day tank.
Low powered submersible sensor for measuring the level of water in a 3 metre high tank.
I have a tank 1 metre cubed that holds 1000 Litres of diesel for a generator. I am trying to find a sensor that will inform me of the contents/level
Cost effective level sensor 0 – 2m, media is diesel fuel, output is 0-10V
The IMTG is specifically designed for large quantity OEM customers which manufacture and install content management systems for fuel storage tanks.
I need to measure the difference in depth upstream and downstream of a freshwater weir with a maximum depth of 5 meters. Please suggest a low cost sensor with a low resolution output which can be used on many sites. The IMTG is a low cost hydrostatic pressure sensor which has been designed specifically for […]
We are currently working on a project to enable remote monitoring of water tank level. We need a stand alone remote tank monitoring system for 10 water tanks where an alarm can be transmitted once certain levels are reached, which then transmits to a remote monitoring station over the internet. Would you have a solution […]
We are looking for a submersible rainwater tank level sensor. However there is a limited budget, so price is an important consideration. The specification we require is approximately 3.5 metres maximum water depth (0.35 bar), 4-20mA output, 15 volt supply, typically 0.5% accuracy or better, medium will be rain water and a cable 5 metres […]
OEM fuel level sensor for diesel generators installed at telecom mobile cell tower sites.
IMTG is a low cost OEM submersible level transmitter which is typically used in applications that require diesel fuel level measurement in small tanks.
The IMTG is a submersible sensor that is specifically designed for diesel tank level measurement.
Economical pressure transducer for monitoring fluid level inside a tank where there is no external mounting point at the bottom of the tank.