1 bar, 15 psi, 1 kg/cm2, 100 kPa Range 4-20 mA Output Pressure Sensors

0…1 bar, 0…15 psi, 0…1 kg/cm2, or 0…100 kPa pressure range, 4…20 mA output signal pressure sensors.

These pressure sensors will measure from 0 to 1 bar, 0 to 15 pounds per square inch, 0 to 1 kilogram per square centimetre, or 0 to 100 kilopascals pressure ranges, and convert the measured pressure to a corresponding output signal from 4 to 20 milliamps.

• Vacuum suction sensor & wall mount digital readout with switched contacts
• Pitot tube air flow calculation 1000 hPa differential pressure transmitter
• 10 metre high cylindrical oil tank level gauge and transmitter
• P to I converter for 0.2-1.0 kg/cm² input & 4-20mA output signal
• Bulk powders silo fluidisation blower aeration ATEX approved HART pressure transmitter
• 1 barg IS certified 4-20mA submersible leachate pressure sensor for tank level gauging use
• Minus 750-0 mmHg gauge suction range 4-20 milliamps output sensor
• Minus 30 inHg 4-20mA air pressure sensor for measuring vacuum in a sealed tank heated to 350F
• Minus 15 psi gauge intrinsically safe pressure transmitter
• Dredging vacuum pressure Transmitter
• Bi-directional 15psig 4-20mA out air pressure sensor for research use
• 10mH2O absolute 4-20mA marine approved seawater pressure sensor for bilge water leak testing use
• -1 to 20 bar g compound range IS 4-20mA propane pressure sensor for process control use
• 15psi dp range 4-20mA air pressure sensor for chamber airflow testing use on a 15psi line
• 300 degC tolerant pressure transmitter for pressures up to 100 kPa g
• 1 bar range pressure transmitter with 400 bar overpressure protection
• -1 to +5 bar relative 4-20mA out low cost combined vacuum and pressure sensor
• Flush mountable vacuum transmitter with negative 1 bar range
• Marine fender air and seawater pressure sender and display

Calibration Tables

0…1 bar to 4…20 mA

Use this table to determine the exact calibration points for a 0…1 bar range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…1 bar to 4…20 mA converter and enter any value.

% Scale	0…1bar	4…20mA
0	0.00	4.00
10	0.10	5.60
20	0.20	7.20
30	0.30	8.80
40	0.40	10.40
50	0.50	12.00
60	0.60	13.60
70	0.70	15.20
80	0.80	16.80
90	0.90	18.40
100	1.00	20.00

Request product information for a 0...1 bar to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.

0…15 psi to 4…20 mA

Use this table to determine the exact calibration points for a 0…15 pounds per square inch range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…15 psi to 4…20 mA converter and enter any value.

% Scale	0…15psi	4…20mA
0	0.00	4.00
10	1.50	5.60
20	3.00	7.20
30	4.50	8.80
40	6.00	10.40
50	7.50	12.00
60	9.00	13.60
70	10.50	15.20
80	12.00	16.80
90	13.50	18.40
100	15.00	20.00

Request product information for a 0...15 psi to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.

0…1 kg/cm2 to 4…20 mA

Use this table to determine the exact calibration points for a 0…1 kilogram per square centimetre range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…1 kg/cm2 to 4…20 mA converter and enter any value.

% Scale	0…1kg/cm2	4…20mA
0	0.00	4.00
10	0.10	5.60
20	0.20	7.20
30	0.30	8.80
40	0.40	10.40
50	0.50	12.00
60	0.60	13.60
70	0.70	15.20
80	0.80	16.80
90	0.90	18.40
100	1.00	20.00

Request product information for a 0...1 kg/cm2 to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.

0…100 kPa to 4…20 mA

Use this table to determine the exact calibration points for a 0…100 kilopascals range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…100 kPa to 4…20 mA converter and enter any value.

% Scale	0…100kPa	4…20mA
0	0.00	4.00
10	10.00	5.60
20	20.00	7.20
30	30.00	8.80
40	40.00	10.40
50	50.00	12.00
60	60.00	13.60
70	70.00	15.20
80	80.00	16.80
90	90.00	18.40
100	100.00	20.00

Request product information for a 0...100 kPa to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.