Convert a 0 to 100 metres of water column range input liquid level to a 4 to 20 milliamp output signal.
Products
LMP 307 0…100 mH2O IP68 Level Probe & Transmitter
The LMP 307 submersible level probe is used to measure the level of a liquid over a 0 to 100 mH2O range, using a submerged hydrostatic pressure sensor, and an integrated 4-20mA current loop output transmitter to send the signal through long cable lengths.
LMP307 Submersible Freshwater Level Transmitter
- SKU ID: s1-lmp307-48-33708
- Part Number: 451-1-1-1-1-3-2-110-000
- Sensor Type: Level only
- Level Sensing Range: 0 to 100
- Units: mH2O
- Reference Type: Gauge / Vented (atm to +P)
- Output Signal: 4-20mA, 2 wire
- Accuracy: 0.35%FS above (11-12bit res)
- Installation Type: Submersible probe with flush diaphragm and detachable nose cone
- Housing Material: Stainless Steel 316L
- Diaphragm Material: Stainless Steel 316L
- Media Exposed Seals: FKM
- Cable Type: PUR (70degC max)
- Cable Length: 110
- Cable Length Units: Metres (m)
Featured 100 mh2o range 4-20ma output liquid level sensors
Converter Tool
Enter input value in mH2O for a linear range from 0 to 100 mH2O to calculate output value in mA for a linear range from 4 to 20 mA.
Request product info for a 0...100 mH2O linear input range to 4...20 mA linear output scale measurement device.
Conversion Table
Pick a value from the 0 to 100 mH2O linear input range column of the conversion table below, and find the corresponding value in the 4 to 20 mA linear output range column.
| 0...100 mH2O | 4...20 mA | 🔗 |
|---|
Featured 100 mh2o range 4-20ma output liquid level sensors
Related Help Guides
- How to get a 10 volt signal from a 4-20mA output pressure sensor
- Determining the hydrostatic pressure range for a tank level sensor
- Measuring liquid level in a sealed tank with a hydrostatic pressure sensor
- Difference between vented and non-vented water level measurement
- Advantages and Disadvantages of using a 4 to 20 mA Signal
- How to Connect a 4-20mA Current Loop Pressure Transmitter
Related Product and Application Guides
Related Technical Terms
- 2 Wire
- 4 to 20 mA Current Loop Output Signal
- Capacitive Fluid Level Measurement
- cmH2O – Centimetres of Water Column at 4 deg C Pressure Unit
- Conductive Fluid Level Detection
- Float Fluid Level Detection
- ftH2O – Feet of Water Column at 4 deg C Pressure Unit
- HART®
- Hydrostatic Pressure
- Liquid Level Sensors
- mH2O – Metres of Water Gauge at 4 deg C Pressure Unit
- mmH2O – Millimetres of Water Column at 4 deg C Pressure Unit
- Specific Gravity
- Square Root Extraction
- Stainless Steel Pressure Sensors
- Transmitter
- Turndown Ratio
- Vibrating Tuning Fork Fluid Level Detection
Related Online Tools
- Liquid Level to Hydrostatic Pressure Calculator
- Pressure Transmitter 4-20mA Current Output Calculator
- Flow Transmitter 4-20mA Current Output Calculator
- DP Flow Transmitter Output Calculator
- Fluid Depth, Density, Gravity, and Pressure Calculator
- 4-20mA Signal to Measurement Reading Converter
Contact us about this 100mH2O to 4-20mA page to request more information, or to discuss your application requirements.