A brewery grade externally mounted liquid level sensor for measuring the height of beer over a range of 0 to 2,000mm from the triclamp process connection, and sending the corresponding 0-5Vdc signal through the CIP cleaning proof cable electrical connection.
Modbus RTU communications protocol RS485 serial interface, small diameter for water borehole immersion, hydrostatic pressure level sensor.
Level sensors for submerging permanently in liquid to determine the level or depth of fluid by measuring the hydrostatic pressure.
IP68 rated transmitters and transducers suitable for use with tidal and coastal salt water.
Voltage signal out pressure transducers protected to IP 68 ingress protection rating for immersing in water or other compatible liquids.
Pressure sensors for installing underwater which are constructed to prevent water entering sensitive components and causing damage to the sensor.
IP68 pressure transmitters which are waterproof rated for permanent installations underwater or requiring temporary flood protection.
I am looking to measure pressure in a water network with a range of 0-10bar, overpressure of 40 bar & 20m long IP68 protected cable for flood protection.
Water pressure transmitter with IP68, 0-10 bar pressure range, 4-20mA output for connecting to water pipes.
A pressure sensor for use in wet factory environments which are washed down daily.
Marine approved stainless steel diaphragm pressure transmitter with 4-20mA current loop output for shipbuilding in ranges from 100mb to 600 bar gauge or absolute.
Marine approved pressure transmitter with 4-20mA current loop output for shipbuilding with optional CuNiFe housing for sea-water compatibility