0…2 mH2O or 0…6 ftH2O liquid level range, 4…20 mA, 0…10 V, or 0…5 V output signal hydrostatic liquid level sensors.
These hydrostatic liquid level sensors will measure from 0 to 2 metres of water column or 0 to 6 feet of water column liquid level ranges, and convert the measured level to a corresponding output signal from 4 to 20 milliamps, 0 to 10 volts, or 0 to 5 volts.
Underground rain water storage tank level sensor and readout for 2 metre depth
2m tank height, high temperature oil level sensor with 4-20mA out
Grease trap waste receiving tank 2m range 4-20mA level transmitter
Dairy wash water tank submersible level sensor for temperature up to 100C and 2m high tank
Low cost 2 metre high diesel tank level sensor with 0-10 volt output
Freshwater 2 metre river depth submersible probe with 4-20mA output
0.2 bar tank level pressure sensor for fuel oil up to 2m deep
Generator fuel oil day tank drop-in 200mb hydrostatic level sensor
2 metre deep diesel tank level sensor for submersion
Brewing tank 2000mm range 0-5Vdc output stainless steel 316L beer level sensor
2 mWC waste water submersible pressure transmitter with 1/2 BSP female fitting
Diesel fuel oil tank level sensor with 200 mbar range for internal installation
Small diameter dip well water level transducer- 2 meters of freshwater depth, submersible pressure transmitter
Screw-in 2m height onboard marine vessel diesel tank base mount level sensor- 200cm range 0-5Vdc output submersible road flood stream depth and PT1000 sensor
Lightning protected submersible level sensor for hydroelectric intakes and rivers- Cost-effective hydrostatic sensor for OEM diesel fuel management systems up to 2 metres
Calibration Tables
0…2 mH2O to 4…20 mA
Use this table to determine the exact calibration points for a 0…2 metres of water column range to 4…20 milliamps output hydrostatic liquid level sensor. For additional calibration points use our 0…2 mH2O to 4…20 mA converter and enter any value.
| % Scale | 0…2mH2O | 4…20mA |
|---|---|---|
| 0 | 0.00 | 4.00 |
| 10 | 0.20 | 5.60 |
| 20 | 0.40 | 7.20 |
| 30 | 0.60 | 8.80 |
| 40 | 0.80 | 10.40 |
| 50 | 1.00 | 12.00 |
| 60 | 1.20 | 13.60 |
| 70 | 1.40 | 15.20 |
| 80 | 1.60 | 16.80 |
| 90 | 1.80 | 18.40 |
| 100 | 2.00 | 20.00 |
Request product information for a 0...2 mH2O to 4...20 mA hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.
0…6 ftH2O to 4…20 mA
Use this table to determine the exact calibration points for a 0…6 feet of water column range to 4…20 milliamps output hydrostatic liquid level sensor. For additional calibration points use our 0…6 ftH2O to 4…20 mA converter and enter any value.
| % Scale | 0…6ftH2O | 4…20mA |
|---|---|---|
| 0 | 0.00 | 4.00 |
| 10 | 0.60 | 5.60 |
| 20 | 1.20 | 7.20 |
| 30 | 1.80 | 8.80 |
| 40 | 2.40 | 10.40 |
| 50 | 3.00 | 12.00 |
| 60 | 3.60 | 13.60 |
| 70 | 4.20 | 15.20 |
| 80 | 4.80 | 16.80 |
| 90 | 5.40 | 18.40 |
| 100 | 6.00 | 20.00 |
Request product information for a 0...6 ftH2O to 4...20 mA hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.
0…2 mH2O to 0…10 V
Use this table to determine the exact calibration points for a 0…2 metres of water column range to 0…10 volts output hydrostatic liquid level sensor. For additional calibration points use our 0…2 mH2O to 0…10 V converter and enter any value.
| % Scale | 0…2mH2O | 0…10V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 0.20 | 1.00 |
| 20 | 0.40 | 2.00 |
| 30 | 0.60 | 3.00 |
| 40 | 0.80 | 4.00 |
| 50 | 1.00 | 5.00 |
| 60 | 1.20 | 6.00 |
| 70 | 1.40 | 7.00 |
| 80 | 1.60 | 8.00 |
| 90 | 1.80 | 9.00 |
| 100 | 2.00 | 10.00 |
Request product information for a 0...2 mH2O to 0...10 V hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.
0…6 ftH2O to 0…10 V
Use this table to determine the exact calibration points for a 0…6 feet of water column range to 0…10 volts output hydrostatic liquid level sensor. For additional calibration points use our 0…6 ftH2O to 0…10 V converter and enter any value.
| % Scale | 0…6ftH2O | 0…10V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 0.60 | 1.00 |
| 20 | 1.20 | 2.00 |
| 30 | 1.80 | 3.00 |
| 40 | 2.40 | 4.00 |
| 50 | 3.00 | 5.00 |
| 60 | 3.60 | 6.00 |
| 70 | 4.20 | 7.00 |
| 80 | 4.80 | 8.00 |
| 90 | 5.40 | 9.00 |
| 100 | 6.00 | 10.00 |
Request product information for a 0...6 ftH2O to 0...10 V hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.
0…2 mH2O to 0…5 V
Use this table to determine the exact calibration points for a 0…2 metres of water column range to 0…5 volts output hydrostatic liquid level sensor. For additional calibration points use our 0…2 mH2O to 0…5 V converter and enter any value.
| % Scale | 0…2mH2O | 0…5V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 0.20 | 0.50 |
| 20 | 0.40 | 1.00 |
| 30 | 0.60 | 1.50 |
| 40 | 0.80 | 2.00 |
| 50 | 1.00 | 2.50 |
| 60 | 1.20 | 3.00 |
| 70 | 1.40 | 3.50 |
| 80 | 1.60 | 4.00 |
| 90 | 1.80 | 4.50 |
| 100 | 2.00 | 5.00 |
Request product information for a 0...2 mH2O to 0...5 V hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.
0…6 ftH2O to 0…5 V
Use this table to determine the exact calibration points for a 0…6 feet of water column range to 0…5 volts output hydrostatic liquid level sensor. For additional calibration points use our 0…6 ftH2O to 0…5 V converter and enter any value.
| % Scale | 0…6ftH2O | 0…5V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 0.60 | 0.50 |
| 20 | 1.20 | 1.00 |
| 30 | 1.80 | 1.50 |
| 40 | 2.40 | 2.00 |
| 50 | 3.00 | 2.50 |
| 60 | 3.60 | 3.00 |
| 70 | 4.20 | 3.50 |
| 80 | 4.80 | 4.00 |
| 90 | 5.40 | 4.50 |
| 100 | 6.00 | 5.00 |
Request product information for a 0...6 ftH2O to 0...5 V hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.