Cost effective pressure transducers to connect to data logger for diesel engine testing. These transducers can be used to measure the pressures of air, diesel, coolant and oil for testing purposes. The pressure transducers will accept a 5V excitation voltage and will produce a 0.5-4.5V out.
Contents
IMP Low Cost Pressure Transducer
- Datum: Gauge (G)
- Pressure Range: -1 to +3 bar (M1P3)
- Output: 0.5 – 4.5V, 3-wire ratiometric (9)
- Non-Linearity and Hysteresis: 0.25% FS (standard) (A)
- Thermal Zero Shift: 0.04% FS per °C (standard) (4)
- Electrical Connection: Large DIN plug (B)
- Process Connection: G1/4 male DIN 3852 (A)
- Internal Seal Material: Viton (standard)(V)
- Cable Length if required (metres):
- Special Requirements: Standard (000)
IMPLR Low Range Pressure Transducer
- Pressure Range: -500 to +500mbar gauge
- Output: 0.5 – 4.5V, 3-wire ratiometric (9)
- Non-Linearity and Hysteresis: 0.25% FS (standard) (A)
- Thermal Zero Shift: 0.04% FS per°C (standard) (4)
- Electrical Connection: Large DIN plug (B)
- Process Connection: G1/4 male DIN 3852 (A)
- Internal Seal Material: Viton (standard)(V)
- Cable Length if required (metres):
- Special Requirements: Standard (000)