• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
SensorsONE

SensorsONE

  • Products
  • Search
  • Contact

bar to ftH2O Conversion Table

Assuming a water density of 1000 kg/m³ and gravity of 9.80665 m/s², bar pressure can be calculated as water height in feet as follows

  • 1 ftH2O = 2,989.07 pascals (Pa)
  • 1 bar = 100,000 pascals (Pa)
  • ftH2O value x 2,989.07 Pa = bar value x 100,000 Pa
  • ftH2O value = bar value x 33.4553

Contents

Toggle
  • 0 to 10 bar to ftH2O Conversion
  • 0 to 100 bar to ftH2O Conversion
  • 0 to 1,000 bar to ftH2O Conversion

0 to 10 bar to ftH2O Conversion

Featured bar pressure unit scaled products

  • SIL2 approved 10 bar pressure transducer with 4 to 20 mA output
  • Dirty water, sludge & sewerage tank level 400 mbar pressure sensor
  • 100 bar pressure logging system with 10hz sampling rate and digital readout
  • Hydraulic puller-tensioner bar pressure to kilonewton load HMI display & logger

Enter a pressure in bar below to convert it to the equivalent pressure in ftH2O.

From bar
To ftH2O
Sorry, a graphic could not be displayed here, because your browser does not support HTML5 Canvas.

Featured ftH2O pressure unit scaled products

  • 40 ftH2Og range 1-5Vdc output freshwater pressure sensor for environmental monitoring use
  • 40 ftH2O Hydroelectric plant tailwater elevation & temperature sensor
  • 2 to 5 ftH2O g range 1 to 5 volts output submersible freshwater tank level sensor
  • Non-metallic level sensor with 3 ftH2O range & 4-20mA signal

Choose a value between 0 and 10 bar from the pressure conversion table below, to obtain the converted value in ftH2O.

bar ftH2O 🔗

0 to 100 bar to ftH2O Conversion

Featured bar pressure unit scaled products

  • SIL2 approved 10 bar pressure transducer with 4 to 20 mA output
  • Dirty water, sludge & sewerage tank level 400 mbar pressure sensor
  • 100 bar pressure logging system with 10hz sampling rate and digital readout
  • Hydraulic puller-tensioner bar pressure to kilonewton load HMI display & logger

Enter a pressure in bar below to convert it to the equivalent pressure in ftH2O.

From bar
To ftH2O
Sorry, a graphic could not be displayed here, because your browser does not support HTML5 Canvas.

Featured ftH2O pressure unit scaled products

  • 40 ftH2Og range 1-5Vdc output freshwater pressure sensor for environmental monitoring use
  • 40 ftH2O Hydroelectric plant tailwater elevation & temperature sensor
  • 2 to 5 ftH2O g range 1 to 5 volts output submersible freshwater tank level sensor
  • Non-metallic level sensor with 3 ftH2O range & 4-20mA signal

Choose a value between 0 and 100 bar from the pressure conversion table below, to obtain the converted value in ftH2O.

bar ftH2O 🔗

0 to 1,000 bar to ftH2O Conversion

Featured bar pressure unit scaled products

  • SIL2 approved 10 bar pressure transducer with 4 to 20 mA output
  • Dirty water, sludge & sewerage tank level 400 mbar pressure sensor
  • 100 bar pressure logging system with 10hz sampling rate and digital readout
  • Hydraulic puller-tensioner bar pressure to kilonewton load HMI display & logger

Enter a pressure in bar below to convert it to the equivalent pressure in ftH2O.

From bar
To ftH2O
Sorry, a graphic could not be displayed here, because your browser does not support HTML5 Canvas.

Featured ftH2O pressure unit scaled products

  • 40 ftH2Og range 1-5Vdc output freshwater pressure sensor for environmental monitoring use
  • 40 ftH2O Hydroelectric plant tailwater elevation & temperature sensor
  • 2 to 5 ftH2O g range 1 to 5 volts output submersible freshwater tank level sensor
  • Non-metallic level sensor with 3 ftH2O range & 4-20mA signal

Choose a value between 0 and 1000 bar from the pressure conversion table below, to obtain the converted value in ftH2O.

bar ftH2O 🔗

Primary Sidebar

Wirelessly Measure & Log Pressure

Use this battery powered wireless pressure sensor to transmit readings to a receiver connected to USB, RS485, RS232, cellular network or analog output

Use this battery powered wireless pressure sensor to transmit readings to a receiver connected to USB, RS485, RS232, cellular network or analog output

Email Your Enquiry

enquiries@sensorsone.com
By clicking "OK" or continuing to use this website you are providing your consent to use cookies as described in our Privacy Policy

© 2025 SensorsONE Ltd, all rights reserved

  • Home
  • Products
  • Tools
  • Legal
  • Contact