0…2.5 mH2O or 0…8 ftH2O liquid level range, 4…20 mA, 0…10 V, or 0…5 V output signal hydrostatic liquid level sensors.
These hydrostatic liquid level sensors will measure from 0 to 2.5 metres of water column or 0 to 8 feet of water column liquid level ranges, and convert the measured level to a corresponding output signal from 4 to 20 milliamps, 0 to 10 volts, or 0 to 5 volts.
2.5 mH2O range 0-10V signal submersible diesel level sensor
250cm range 0-10Vdc output plastic submersible chemical tank level sensor- Submersible diesel fuel tank level sensor with 5V out for 7ft height
- 2.5 metre water level transmitter for submersing inside underground tank
Wastewater holding tank submersible 8 feet deep level monitoring pressure transmitter- Landfill leachate 2.5 mWG range level sensor with 5 volt output
Calibration Tables
0…2.5 mH2O to 4…20 mA
Use this table to determine the exact calibration points for a 0…2.5 metres of water column range to 4…20 milliamps output hydrostatic liquid level sensor. For additional calibration points use our 0…2.5 mH2O to 4…20 mA converter and enter any value.
| % Scale | 0…2.5mH2O | 4…20mA |
|---|---|---|
| 0 | 0.00 | 4.00 |
| 10 | 0.25 | 5.60 |
| 20 | 0.50 | 7.20 |
| 30 | 0.75 | 8.80 |
| 40 | 1.00 | 10.40 |
| 50 | 1.25 | 12.00 |
| 60 | 1.50 | 13.60 |
| 70 | 1.75 | 15.20 |
| 80 | 2.00 | 16.80 |
| 90 | 2.25 | 18.40 |
| 100 | 2.50 | 20.00 |
Request product information for a 0...2.5 mH2O to 4...20 mA hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.
0…8 ftH2O to 4…20 mA
Use this table to determine the exact calibration points for a 0…8 feet of water column range to 4…20 milliamps output hydrostatic liquid level sensor. For additional calibration points use our 0…8 ftH2O to 4…20 mA converter and enter any value.
| % Scale | 0…8ftH2O | 4…20mA |
|---|---|---|
| 0 | 0.00 | 4.00 |
| 10 | 0.80 | 5.60 |
| 20 | 1.60 | 7.20 |
| 30 | 2.40 | 8.80 |
| 40 | 3.20 | 10.40 |
| 50 | 4.00 | 12.00 |
| 60 | 4.80 | 13.60 |
| 70 | 5.60 | 15.20 |
| 80 | 6.40 | 16.80 |
| 90 | 7.20 | 18.40 |
| 100 | 8.00 | 20.00 |
Request product information for a 0...8 ftH2O to 4...20 mA hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.
0…2.5 mH2O to 0…10 V
Use this table to determine the exact calibration points for a 0…2.5 metres of water column range to 0…10 volts output hydrostatic liquid level sensor. For additional calibration points use our 0…2.5 mH2O to 0…10 V converter and enter any value.
| % Scale | 0…2.5mH2O | 0…10V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 0.25 | 1.00 |
| 20 | 0.50 | 2.00 |
| 30 | 0.75 | 3.00 |
| 40 | 1.00 | 4.00 |
| 50 | 1.25 | 5.00 |
| 60 | 1.50 | 6.00 |
| 70 | 1.75 | 7.00 |
| 80 | 2.00 | 8.00 |
| 90 | 2.25 | 9.00 |
| 100 | 2.50 | 10.00 |
Request product information for a 0...2.5 mH2O to 0...10 V hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.
0…8 ftH2O to 0…10 V
Use this table to determine the exact calibration points for a 0…8 feet of water column range to 0…10 volts output hydrostatic liquid level sensor. For additional calibration points use our 0…8 ftH2O to 0…10 V converter and enter any value.
| % Scale | 0…8ftH2O | 0…10V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 0.80 | 1.00 |
| 20 | 1.60 | 2.00 |
| 30 | 2.40 | 3.00 |
| 40 | 3.20 | 4.00 |
| 50 | 4.00 | 5.00 |
| 60 | 4.80 | 6.00 |
| 70 | 5.60 | 7.00 |
| 80 | 6.40 | 8.00 |
| 90 | 7.20 | 9.00 |
| 100 | 8.00 | 10.00 |
Request product information for a 0...8 ftH2O to 0...10 V hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.
0…2.5 mH2O to 0…5 V
Use this table to determine the exact calibration points for a 0…2.5 metres of water column range to 0…5 volts output hydrostatic liquid level sensor. For additional calibration points use our 0…2.5 mH2O to 0…5 V converter and enter any value.
| % Scale | 0…2.5mH2O | 0…5V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 0.25 | 0.50 |
| 20 | 0.50 | 1.00 |
| 30 | 0.75 | 1.50 |
| 40 | 1.00 | 2.00 |
| 50 | 1.25 | 2.50 |
| 60 | 1.50 | 3.00 |
| 70 | 1.75 | 3.50 |
| 80 | 2.00 | 4.00 |
| 90 | 2.25 | 4.50 |
| 100 | 2.50 | 5.00 |
Request product information for a 0...2.5 mH2O to 0...5 V hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.
0…8 ftH2O to 0…5 V
Use this table to determine the exact calibration points for a 0…8 feet of water column range to 0…5 volts output hydrostatic liquid level sensor. For additional calibration points use our 0…8 ftH2O to 0…5 V converter and enter any value.
| % Scale | 0…8ftH2O | 0…5V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 0.80 | 0.50 |
| 20 | 1.60 | 1.00 |
| 30 | 2.40 | 1.50 |
| 40 | 3.20 | 2.00 |
| 50 | 4.00 | 2.50 |
| 60 | 4.80 | 3.00 |
| 70 | 5.60 | 3.50 |
| 80 | 6.40 | 4.00 |
| 90 | 7.20 | 4.50 |
| 100 | 8.00 | 5.00 |
Request product information for a 0...8 ftH2O to 0...5 V hydrostatic liquid level sensor that matches the input and output measurement range from the calibration table above.