0…10 bar or 0…150 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
These pressure sensors will measure from 0 to 10 bars or 0 to 150 pounds per square inch pressure ranges, and convert the measured pressure to a corresponding output signal from 0 to 10 volts, 0 to 5 volts, or 1 to 5 volts.
Automotive water testing pressure sensor with 10 barg range and 0-5v output
150psig range wireless pressure sensing kit for leak testing use
180 degC pressure sensor for saturated steam up to 10 bar
300 foot sea depth waterproof pressure sensor with 0-5V signal
10 bar g range wireless pressure sensing kit for BMS monitoring use
Carbonated water pressure transducer for measuring up to 150 psi g
2barg, 10barg range wireless pressure sensing kit for production monitoring use
Internal ROV pressure sensor for sea water up to 10 bar abs
10 bar absolute pressure transducer with 10Vdc output for use on fresh water
10 barg range 1-5 volts output ceramic diaphragm pressure sensor- 150 psia range freshwater 0-5Vdc output pressure sensor for building management use
150 psig 0-10Vdc output freon refrigerant gas pressure sensor for refrigeration control systems- 10 bar water mains pressure sensor with overpressure protection for commercial buildings
Calibration Tables
0…10 bar to 0…10 V
Use this table to determine the exact calibration points for a 0…10 bars range to 0…10 volts output pressure sensor. For additional calibration points use our 0…10 bar to 0…10 V converter and enter any value.
| % Scale | 0…10bar | 0…10V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 1.00 | 1.00 |
| 20 | 2.00 | 2.00 |
| 30 | 3.00 | 3.00 |
| 40 | 4.00 | 4.00 |
| 50 | 5.00 | 5.00 |
| 60 | 6.00 | 6.00 |
| 70 | 7.00 | 7.00 |
| 80 | 8.00 | 8.00 |
| 90 | 9.00 | 9.00 |
| 100 | 10.00 | 10.00 |
Request product information for a 0...10 bar to 0...10 V pressure sensor that matches the input and output measurement range from the calibration table above.
0…150 psi to 0…10 V
Use this table to determine the exact calibration points for a 0…150 pounds per square inch range to 0…10 volts output pressure sensor. For additional calibration points use our 0…150 psi to 0…10 V converter and enter any value.
| % Scale | 0…150psi | 0…10V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 15.00 | 1.00 |
| 20 | 30.00 | 2.00 |
| 30 | 45.00 | 3.00 |
| 40 | 60.00 | 4.00 |
| 50 | 75.00 | 5.00 |
| 60 | 90.00 | 6.00 |
| 70 | 105.00 | 7.00 |
| 80 | 120.00 | 8.00 |
| 90 | 135.00 | 9.00 |
| 100 | 150.00 | 10.00 |
Request product information for a 0...150 psi to 0...10 V pressure sensor that matches the input and output measurement range from the calibration table above.
0…10 bar to 0…5 V
Use this table to determine the exact calibration points for a 0…10 bars range to 0…5 volts output pressure sensor. For additional calibration points use our 0…10 bar to 0…5 V converter and enter any value.
| % Scale | 0…10bar | 0…5V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 1.00 | 0.50 |
| 20 | 2.00 | 1.00 |
| 30 | 3.00 | 1.50 |
| 40 | 4.00 | 2.00 |
| 50 | 5.00 | 2.50 |
| 60 | 6.00 | 3.00 |
| 70 | 7.00 | 3.50 |
| 80 | 8.00 | 4.00 |
| 90 | 9.00 | 4.50 |
| 100 | 10.00 | 5.00 |
Request product information for a 0...10 bar to 0...5 V pressure sensor that matches the input and output measurement range from the calibration table above.
0…150 psi to 0…5 V
Use this table to determine the exact calibration points for a 0…150 pounds per square inch range to 0…5 volts output pressure sensor. For additional calibration points use our 0…150 psi to 0…5 V converter and enter any value.
| % Scale | 0…150psi | 0…5V |
|---|---|---|
| 0 | 0.00 | 0.00 |
| 10 | 15.00 | 0.50 |
| 20 | 30.00 | 1.00 |
| 30 | 45.00 | 1.50 |
| 40 | 60.00 | 2.00 |
| 50 | 75.00 | 2.50 |
| 60 | 90.00 | 3.00 |
| 70 | 105.00 | 3.50 |
| 80 | 120.00 | 4.00 |
| 90 | 135.00 | 4.50 |
| 100 | 150.00 | 5.00 |
Request product information for a 0...150 psi to 0...5 V pressure sensor that matches the input and output measurement range from the calibration table above.
0…10 bar to 1…5 V
Use this table to determine the exact calibration points for a 0…10 bars range to 1…5 volts output pressure sensor. For additional calibration points use our 0…10 bar to 1…5 V converter and enter any value.
| % Scale | 0…10bar | 1…5V |
|---|---|---|
| 0 | 0.00 | 1.00 |
| 10 | 1.00 | 1.40 |
| 20 | 2.00 | 1.80 |
| 30 | 3.00 | 2.20 |
| 40 | 4.00 | 2.60 |
| 50 | 5.00 | 3.00 |
| 60 | 6.00 | 3.40 |
| 70 | 7.00 | 3.80 |
| 80 | 8.00 | 4.20 |
| 90 | 9.00 | 4.60 |
| 100 | 10.00 | 5.00 |
Request product information for a 0...10 bar to 1...5 V pressure sensor that matches the input and output measurement range from the calibration table above.
0…150 psi to 1…5 V
Use this table to determine the exact calibration points for a 0…150 pounds per square inch range to 1…5 volts output pressure sensor. For additional calibration points use our 0…150 psi to 1…5 V converter and enter any value.
| % Scale | 0…150psi | 1…5V |
|---|---|---|
| 0 | 0.00 | 1.00 |
| 10 | 15.00 | 1.40 |
| 20 | 30.00 | 1.80 |
| 30 | 45.00 | 2.20 |
| 40 | 60.00 | 2.60 |
| 50 | 75.00 | 3.00 |
| 60 | 90.00 | 3.40 |
| 70 | 105.00 | 3.80 |
| 80 | 120.00 | 4.20 |
| 90 | 135.00 | 4.60 |
| 100 | 150.00 | 5.00 |
Request product information for a 0...150 psi to 1...5 V pressure sensor that matches the input and output measurement range from the calibration table above.