A high accuracy gauge pressure sensor for hydraulic control use to measure pressure of mineral hydraulic oil on material tension and compression testing machines over a range of 0 to 1,500 psi g from the 1/4 NPT male process connection, and sending the corresponding 4-20mA signal through the field housing electrical connection.
A duplex steel pressure sensor for water treatment use to measure pressure of seawater over a range of 0 to 1,500 psi g from the 1/4 NPT male process connection, and sending the corresponding 0-5Vdc signal through the DIN plug electrical connection.
Economical saltwater spray corrosion resistant ceramic diaphragm pressure sensor for measuring over a 0-100 bar gauge pressure range and generating a 1 to 10 volts output signal.
A saltwater compatible pressure sensor for reverse osmosis desalination use to measure pressure of seawater over a range of 0 to 1,500 psi g from the G1/4 male process connection, and sending the corresponding 4-20mA signal through the integral cable electrical connection.
Economical corrosion resistant ceramic diaphragm pressure sensor for measuring over a 0 to 100 bar gauge pressure range and generating a 0 to 10 volts output signal.
0…100 bar or 0…1500 psi pressure range, 0…10 V, 0…5 V, or 1…5 V output signal pressure sensors.
0…100 bar, 0…1500 psi, 0…100 kg/cm2, or 0…10 MPa pressure range, 4…20 mA output signal pressure sensors.
Record water pressure and temperature for hydrostatic leak testing a new section of pipeline.
digital pressure sensor with RS485 serial interface and front end wetted components made from Hastelloy C276 which is sea-water corrosion resistant.
Pressure transducer which can be connected to a PC to use in-house to measure pressure decay
4-20mA current output pressure transducer for 0-100 bar g pressure range with material certification to 3.1 standard, atex haz. area certification and calibration certification.
Transmitter for measuring pressure with a range scaled from 0 to 100 kg/cm² range, configurable and adjustable via HART communication.
4-20mA pressure transducer and manual digital readout with logging facility to enable pressure tests up to 100 bar to be logged with respect to time at a sample rate of 10 Hz.
The Leo Record Ei pressure logger which is the replacement product for the Mano Record Ei
4 to 20mA output Ex ia intrinsically safe pressure sensor with working range of 0 to 100 bar g for use on gas or fluid in the range of 0 to 100°C, accurate to 0.5% of full range.