Click save settings to reload page with unique web page address for bookmarking and sharing the current tool settings
Invert the low & high range limits for the measurement output settings
Flip tool with current settings to swap 1-5V input (I) with measurement output parameters
- 150psig range wireless pressure sensing kit for leak testing use
- TSA Precision Pressure Transmitter
- 0-100mV to 1-5V Signal Conversion
- Internal ROV pressure sensor for sea water up to 10 bar abs
This voltage signal to measurement conversion tool will convert an electrical signal within the range of 1 to 5 volts to the ideal reading of any linear measurement type and create an incremental volts conversion scale for each measurement range entered.
This tool uses the following formula to calculate the measurement reading from a voltage signal input over a 1-5V range:
Measurement Rdg = (High Limit – Low Limit) x (V out – 1) / 4 + Low Limit
Voltage Input Signal (1-5V) Reading
Add the analogue input signal reading in volts (V) that you want to convert between 1 and 5 V.
Enter the measurement unit associated with the output values.
Add the minimum possible value for the measurement range of your instrument. For example zero would be a typical value for most instrumentation but you can also add negative (-) or positive (+) values as well. A value in any engineering units can be used as long as it relates to a linear measurement, and the same unit is used for the Highest value.
Add the maximum possible value for the measurement range of your instrument, e.g. full scale or full range. This value can be negative (-) or positive (+). Any engineering units can be used as long as it relates to a linear measurement, but the same unit must be used for the Lowest value.
Measurement Reading – Answer
This is the ideal converted measurement for your instrument and therefore represents a perfect reading excluding the measurement uncertainty error of your instrument. The answer value is displayed in the same engineering unit that you entered for the Lowest and Highest range points.
- TK Industrial Pressure Transmitter
- IWR-5 Five Channel Wireless Sensor to 4-20mA or 1-5Vdc Output Signal Receiver
- 1-5 Volts Output Pressure Transducers
- 750psig range wireless pressure sensing kit for leak testing use