Highly accurate digitally compensated pressure transducer with G1/2 male flush pressure port. Designed for use on viscous media or where a flush face is required for easier cleaning when used with food, drink or hazardous substances such as Oxygen. Select pressure ranges as low as 1 bar or as high as 1000 bar. Standard digital output is RS485 which can be converted to RS232 or USB via optional converter cables.
- Pressure Ranges: from 1 to 1000 bar (15 to 15000 psi) gauge, absolute or sealed gauge
- Accuracy: 0.05% FS over +10 to +40 degC and 0.1% FS over -10 to +80 degC
- Output Signal: RS485, USB or RS232 digital connection for pressure, temperature and programming
- Electrical Connections: IP65 or IP68 cable or Binder 723 series connector for sensor, USB male or RS232 9 pin D sub plug for computer interface
- Pressure Connectors: G1/2 male flush (1/2 inch BSP)
- Weight: 160g
- Special Features: Flush face pressure port. Connect up to 16 digital pressure transducers on one RS485 bus connection, measure/log pressure and temperature simultaneously
- Special Options: Galden D20 or Fombin M100 oil-fills for Oxygen compatibility, Olive oil-fill for food and beverage applications and Diffelen oil-fill for high vacuum use. All Hastelloy C276 wetted parts for higher corrosion resistance.
The 35X flush diaphragm digital output pressure sensor is accurate to 0.05% of full scale over a 10 to 40degC temperature range or can be widened to 0.1% over -10 to +80 degC. The temperature signal used to compensate the pressure reading is also provided as a separate digital output.
This pressure sensor includes a highly repeatable and stable silicon chip sensing element which is housed inside a stainless steel 316L oil filled capsule from which the output signal is processed by the microprocessor electronics and a 16 bit analogue to digital converter to produce an RS485 output.
The flush diaphragm can be back filled with different oils so that if the diaphragm is damaged it will be safe for the oil to mix wih the process media without increasing the volatility of the media or introduce any toxic material.
What is the operating temperature for the Series 35X?
The operating temperature range is -40 to +120°C.
Crude oil & diesel grease to 10,000 psi
I am looking at an application where we will be measuring the pressure of crude oil. The working pressure is up to 10K psi. The process liquid may contain heavy diesel resistant grease present that could clog conventional cavity sensors. We are looking for flush mount or isolated diaphragm flush mount sensor that is clog resistant. The sensor will be installed in an Atex zone 1 and a II 1G Ex ia IIC T6/T5/T4 intrinsic safety rating would be ideal, the output should be 2 wire 4-20mA, we prefer a stainless steel 316 diaphragm material, and the preferred electrical connector is a EN 175301-803 A (P18) electrical connector or similar.
The 35 X Ei (ATEX / IECEx approved version) is certified to II 1G Ex ia IIC T4…T6 and has a flush stainless steel 316L diaphragm as standard. The 4-20mA output of the standard 1000 bar range can be re-scaled to exactly 0 to 10,000 psi if required.
- SKU ID: s1-35x-0001
- 35X Type: Standard – 120degC max. media temperature
- Pressure Range: 1000 bar sealed gauge
- Analogue Output Signal: 4-20mA (2 wire)
- Digital Interface: RS485 ready only
- Electrical Connection: DIN plug & socket, IP65
- Process Connection: G1/2 male flush (1/2 inch BSP)
- Media Exposed Materials: Stainless steel 316L and Viton seals
- Oil Filling: Silicone oil (standard)
- Compensated Temperature Range: -10 to +80 degC
- Optional Extras: ATEX intrinsically safe approved
Specification data sheet
Please select the options you require for the 35X Flush Diaphragm Digital Output Pressure Sensor in your application and request a quote.