• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer
SensorsONE

SensorsONE

Measurement Instrumentation Products

  • Products
  • Tools
  • Contact

4…20mA to -10…+10V Bidirectional Signal Conversion

Convert a 4 to 20 milliamps range measurement input signal into a bidirectional -10 to +10 volts output signal.

4...20mA to -10...+10V Bidirectional Signal Conversion

Contents

  • Products
    • DUALCON 4…20mA to -10…+10V Bidirectional Signal Converter
      • DUALCON-6 24V ac/dc Powered 4…20mA to -10…+10V Bidirectional Signal Converter
      • ISOCON-3 Mains Powered 4…20mA to -10…+10V Bidirectional Signal Converter
  • Conversion Tool and Table

Products

DUALCON 4…20mA to -10…+10V Bidirectional Signal Converter

DUALCON 4...20mA to -10...+10V Bidirectional Signal ConverterThe DUALCON isolating signal converter is used to convert a 4 to 20mA current loop input measurement signal to a minus 10 to plus 10V voltage output signal. The DUALCON can be easily mounted to a wall using a TS35 DIN rail.

DUALCON-6 24V ac/dc Powered 4…20mA to -10…+10V Bidirectional Signal Converter

  • SKU ID: s1-dualcon-0003
  • Part No: II-DUALCON-6-A000-HH-000
  • Input Type: 4…20mA
  • Output Type: -10…+10V
  • Supply: 12-36 Vdc or 12-32Vac
  • Isolation: Full 3-Port
  • Installation: DIN Rail TS35
  • Electrical Connections: Screw clamp with pressure plate

ISOCON-3 Mains Powered 4…20mA to -10…+10V Bidirectional Signal Converter

  • SKU ID: s1-dualcon-0004
  • Part No: II-DUALCON-3-A000-HH-000
  • Input Type: 4…20mA
  • Output Type: -10…+10V
  • Supply: 85-260Vac
  • Isolation: Full 3-Port
  • Installation: DIN Rail TS35
  • Electrical Connections: Screw clamp with pressure plate

Conversion Tool and Table

Calculate or look up a 4 to 20 mA input scale value, to find the equivalent value over the -10 to +10 V bidirectional voltage output scale.

Enter input value in mA for a linear range from 4 to 20 mA to calculate output value in V for a linear range from -10 to 10 V.

Input mA
Output V
Sorry, a graphic could not be displayed here, because your browser does not support HTML5 Canvas.

Request product info for a 4...20 mA linear input range to -10...10 V linear output scale measurement device.

Pick a value from the 4 to 20 mA linear input range column of the conversion table below, and find the corresponding value in the -10 to 10 V linear output range column.

4...20 mA -10...10 V 🔗

Primary Sidebar

Tool Sections

  • Density
  • Flow
  • Energy & Power
  • Force, Load & Torque
  • Input & Output Signals
  • Length, Area & Volume
  • Liquid Depth & Level
  • Mass & Weight
  • Pressure
  • Speed & Acceleration
  • Temperature
  • Time & Frequency

Universal Signal Converter

ISOCON universal signal converter
Convert any analogue measurement signal type with this Universal Signal Converter

Convert 4-20mA signal to…

  • 0-20mA
  • 0-10V
  • 0-5V
  • 1-5V

Convert 0-10V signal to…

  • 4-20mA
  • 0-20mA
  • 0-5V
  • 1-5V

Product Selection Guides

  • Pressure Transmitters
  • Pressure Transducers
  • Liquid Level Sensors
  • Digital Pressure Gauges
  • Data Loggers

Application Selection Guides

  • Vacuum
  • Submersible
  • Low Pressure Range
  • Leak Testing
  • High Frequency Response
  • Dual Temperature and Pressure
  • Barometric Pressure

Help Guides

  • Reduce calibration costs of analogue pressure gauges
  • Measuring the difference in air pressure between rooms
  • How to get a 10 volt signal from a 4-20mA output pressure sensor
  • How to Connect a 4-20mA Current Loop Pressure Transmitter
  • Determining the hydrostatic pressure range for a tank level sensor
  • Choosing PVC, PUR, FEP and TPE cable types

Online Measurement Tools

  • Temperature Transmitter 4-20mA Current Output Calculator
  • Pressure Transmitter 4-20mA Current Output Calculator
  • Pressure Transducer 1-5V Voltage Output Calculator
  • Pressure Converter
  • Measurement Reading to 4-20mA Signal Converter
  • Liquid Depth/Level to Hydrostatic Pressure Calculator
  • Input to Output Measurement Reading Converter
  • Force & Area to Pressure Calculator
  • Density to Specific Gravity Calculator

Product Enquiry

Send us your enquiry for a product associated with this 4…20mA to -10…+10V Bidirectional Signal Conversion page, and get assistance with selecting a product for your application.

Email Your Enquiry

enquiries@sensorsone.com

Footer

By clicking "OK" or continuing to use this website you are providing your consent to use cookies as described in our Privacy Policy

© 2021 SensorsONE Ltd, all rights reserved

  • Home
  • Legal
  • Contact