0…200 mbar, 0…3 psi, 0…80 inH2O, or 0…20 kPa pressure range, 4…20 mA output signal pressure sensors.
These pressure sensors will measure from 0 to 200 millibars, 0 to 3 pounds per square inch, 0 to 80 inches of water column, or 0 to 20 kilopascals pressure ranges, and convert the measured pressure to a corresponding output signal from 4 to 20 milliamps.
-3 to 3 psi dp range high accuracy 4-20mA air pressure transmitter for water treatment use
3 psig range 4-20 mA output BMS natural gas or propane heater pressure sensor
0 to -200 mbar negative gauge suction range 4-20mA output stainless steel pressure sensor
3 psig range 4-20mA output natural gas pressure sensor for building boiler heating use
Under and Over pressure monitoring -10…+200 mb pressure transmitter
Calibration Tables
0…200 mbar to 4…20 mA
Use this table to determine the exact calibration points for a 0…200 millibars range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…200 mbar to 4…20 mA converter and enter any value.
% Scale | 0…200mbar | 4…20mA |
---|---|---|
0 | 0.00 | 4.00 |
10 | 20.00 | 5.60 |
20 | 40.00 | 7.20 |
30 | 60.00 | 8.80 |
40 | 80.00 | 10.40 |
50 | 100.00 | 12.00 |
60 | 120.00 | 13.60 |
70 | 140.00 | 15.20 |
80 | 160.00 | 16.80 |
90 | 180.00 | 18.40 |
100 | 200.00 | 20.00 |
Request product information for a 0...200 mbar to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.
0…3 psi to 4…20 mA
Use this table to determine the exact calibration points for a 0…3 pounds per square inch range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…3 psi to 4…20 mA converter and enter any value.
% Scale | 0…3psi | 4…20mA |
---|---|---|
0 | 0.00 | 4.00 |
10 | 0.30 | 5.60 |
20 | 0.60 | 7.20 |
30 | 0.90 | 8.80 |
40 | 1.20 | 10.40 |
50 | 1.50 | 12.00 |
60 | 1.80 | 13.60 |
70 | 2.10 | 15.20 |
80 | 2.40 | 16.80 |
90 | 2.70 | 18.40 |
100 | 3.00 | 20.00 |
Request product information for a 0...3 psi to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.
0…80 inH2O to 4…20 mA
Use this table to determine the exact calibration points for a 0…80 inches of water column range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…80 inH2O to 4…20 mA converter and enter any value.
% Scale | 0…80inH2O | 4…20mA |
---|---|---|
0 | 0.00 | 4.00 |
10 | 8.00 | 5.60 |
20 | 16.00 | 7.20 |
30 | 24.00 | 8.80 |
40 | 32.00 | 10.40 |
50 | 40.00 | 12.00 |
60 | 48.00 | 13.60 |
70 | 56.00 | 15.20 |
80 | 64.00 | 16.80 |
90 | 72.00 | 18.40 |
100 | 80.00 | 20.00 |
Request product information for a 0...80 inH2O to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.
0…20 kPa to 4…20 mA
Use this table to determine the exact calibration points for a 0…20 kilopascals range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…20 kPa to 4…20 mA converter and enter any value.
% Scale | 0…20kPa | 4…20mA |
---|---|---|
0 | 0.00 | 4.00 |
10 | 2.00 | 5.60 |
20 | 4.00 | 7.20 |
30 | 6.00 | 8.80 |
40 | 8.00 | 10.40 |
50 | 10.00 | 12.00 |
60 | 12.00 | 13.60 |
70 | 14.00 | 15.20 |
80 | 16.00 | 16.80 |
90 | 18.00 | 18.40 |
100 | 20.00 | 20.00 |
Request product information for a 0...20 kPa to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.