0…10 mbar, 0…4 inH2O, 0…1000 Pa, or 0…2.3 oz/in2 pressure range, 4…20 mA output signal pressure sensors.
These pressure sensors will measure from 0 to 10 millibars, 0 to 4 inches of water column, 0 to 1000 pascals, or 0 to 2.3 ounces per square inch pressure ranges, and convert the measured pressure to a corresponding output signal from 4 to 20 milliamps.
ATEX approved negative 10 mbar vacuum pressure transmitter
Solvent compatible +/-100mWG dp transmitter with PTFE seals- 4 inch water column range 4-20mA differential pressure sensor for liquids
Measuring HVAC plenum and sub-floor air pressure in data centers
Air Replacement Plant (ARP) 100 mm H2O differential pressure transmitter- Plenum chamber differential pressure transmitter with 100 mmWG range
1000 pascal bidirectional range dry gas pressure transmitter
100 mmWG negative gauge range vacuum sensor
5 inH2O g range 4-20mA output air pressure sensor for air cleaning use
Under and Over pressure monitoring -10…+200 mb pressure transmitter
Calibration Tables
0…10 mbar to 4…20 mA
Use this table to determine the exact calibration points for a 0…10 millibars range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…10 mbar to 4…20 mA converter and enter any value.
| % Scale | 0…10mbar | 4…20mA |
|---|---|---|
| 0 | 0.00 | 4.00 |
| 10 | 1.00 | 5.60 |
| 20 | 2.00 | 7.20 |
| 30 | 3.00 | 8.80 |
| 40 | 4.00 | 10.40 |
| 50 | 5.00 | 12.00 |
| 60 | 6.00 | 13.60 |
| 70 | 7.00 | 15.20 |
| 80 | 8.00 | 16.80 |
| 90 | 9.00 | 18.40 |
| 100 | 10.00 | 20.00 |
Request product information for a 0...10 mbar to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.
0…4 inH2O to 4…20 mA
Use this table to determine the exact calibration points for a 0…4 inches of water column range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…4 inH2O to 4…20 mA converter and enter any value.
| % Scale | 0…4inH2O | 4…20mA |
|---|---|---|
| 0 | 0.00 | 4.00 |
| 10 | 0.40 | 5.60 |
| 20 | 0.80 | 7.20 |
| 30 | 1.20 | 8.80 |
| 40 | 1.60 | 10.40 |
| 50 | 2.00 | 12.00 |
| 60 | 2.40 | 13.60 |
| 70 | 2.80 | 15.20 |
| 80 | 3.20 | 16.80 |
| 90 | 3.60 | 18.40 |
| 100 | 4.00 | 20.00 |
Request product information for a 0...4 inH2O to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.
0…1000 Pa to 4…20 mA
Use this table to determine the exact calibration points for a 0…1000 pascals range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…1000 Pa to 4…20 mA converter and enter any value.
| % Scale | 0…1000Pa | 4…20mA |
|---|---|---|
| 0 | 0.00 | 4.00 |
| 10 | 100.00 | 5.60 |
| 20 | 200.00 | 7.20 |
| 30 | 300.00 | 8.80 |
| 40 | 400.00 | 10.40 |
| 50 | 500.00 | 12.00 |
| 60 | 600.00 | 13.60 |
| 70 | 700.00 | 15.20 |
| 80 | 800.00 | 16.80 |
| 90 | 900.00 | 18.40 |
| 100 | 1,000.00 | 20.00 |
Request product information for a 0...1000 Pa to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.
0…2.3 oz/in2 to 4…20 mA
Use this table to determine the exact calibration points for a 0…2.3 ounces per square inch range to 4…20 milliamps output pressure sensor. For additional calibration points use our 0…2.3 oz/in2 to 4…20 mA converter and enter any value.
| % Scale | 0…2.3oz/in2 | 4…20mA |
|---|---|---|
| 0 | 0.00 | 4.00 |
| 10 | 0.23 | 5.60 |
| 20 | 0.46 | 7.20 |
| 30 | 0.69 | 8.80 |
| 40 | 0.92 | 10.40 |
| 50 | 1.15 | 12.00 |
| 60 | 1.38 | 13.60 |
| 70 | 1.61 | 15.20 |
| 80 | 1.84 | 16.80 |
| 90 | 2.07 | 18.40 |
| 100 | 2.30 | 20.00 |
Request product information for a 0...2.3 oz/in2 to 4...20 mA pressure sensor that matches the input and output measurement range from the calibration table above.